10 Best Studio Subwoofer of September 2025

• 10" glass aramid composite woofer
• Bass extension to 28Hz with a max SPL of 117 dB
• Footswitch control enables/disables sub and crossover filter (footswitch not included)
• Curved design with front-firing bass port for placement flexibility
• Powerful, lightweight Class D amplification

KRK

• Jbl patented slip stream port This patented JBL port design works in concert with the LSR310S Low frequency driver for Deep, dynamic Bass Response at all playback levels
• Xlf extended low frequency setting JBL first, the xlf setting Activates a specially-engineered tuning that emulates the ample bass tuning used in today's dance clubs
• The custom-designed driver in the LSR310S delivers deep low frequency response into the 20 Hz region, and 113 dB peak output, for long periods at full rated power with no risk of failure
• Professional balanced inputs and outputs with balanced XLR and 1/4-inch inputs and XLR outputs you can add the LSR310S to any Studio monitor system to extend its low frequency performance
• The -10Dbv/+4 dB sensitivity switch ensures compatibility with a broad range of signal sources, allowing you to connect the LSR310S to high-output professional equipment without any danger of input overload. Maximum peak input level: +20. 3 dB
• Purchase includes: studio monitor, power cable, and set-up guide
• Inputs: balanced XLR (x2) and TRS (x2)
• Ac input voltage: 100 – 240VAC (10%), 50/ 60Hz
• Pair with the JBL 305P MKII, 306P MKII, or 308P MKII studio monitors for stunning audio detail and an impressive dynamic range!

JBL Professional

• 10-Inch glass-composite low-frequency transducer
• 250 Watt, class AB amplification; power: 100-120V 50/60 Hz or 220-240V 50/60 Hz
• Input gain control (-30 dB to +6 dB, continuously variable) and continuously variable low Pass filter (50 Hz to 140 Hz)
• Switchable high pass filter removes frequency content below 80 Hz from the full-range signal sent to the main monitors
• Momentary footswitch (included) Bypasses the subwoofer, high pass filter, and sub out
• Left and right, balanced XLR and ¼” TRS and unbalanced RCA main inputs

PreSonus

• 200 Watt RMS power give you plenty of headroom to hear extremely clean bass reproduction of your mix and is capable of shaking just about any studio environment when the mix is good.
• Balanced XLR and ¼” ins and high-pass outs make this sub flexible for any project to professional studio set-up and use an open-latch footswitch (not included) to turn off the sub and run mains full-range
• Take control of the sound with -20 to +6 dB gain knob, 0 or 180° polarity switch, and auto on function so your bass mix is exactly where you need it every time for any type of music project.
• Buy with confidance with our 30-day money back guarantee and 1-year warranty.
• Studio ready flat frequency response allows mix engineers to truly hear what is being recorded and gives an uncolored representation of your final product. What you hear is what you get.

Monoprice

• 8inch bass-reflex powered subwoofer
• 22Hz - 150Hz frequency response
• High-power 150W amplifier 
• LOW CUT switch, LOW CUT control (80-120Hz) HIGH CUT control (80-120 Hz)
• PHASE switch 

Yamaha

• Professional studio-quality sound
• 1/4” TRS, RCA, and Bluetooth inputs with 1/4” TRS and RCA outputs
• Adds Bluetooth streaming to any studio monitors
• 200 watts of clean, accurate sound with an 8" woofer
• Desktop remote volume control included

Mackie

• Enclosure Type: bass reflex
• Amplifier Type: Class AB
• Amplifier power: 120 watts peak/ 60 watts RMS
• Frequency response: 38hz-200hz; crossover frequency: 40hz-200hz
• Driver: 10" Low Throw dynamic woofer with these inputs: L/R/LFE/speaker level

ELAC

• 10" 130W Powered Studio Subwoofer with 28Hz-120Hz (-6dB) Frequency Response
• Adjustable Crossover
• Polarity Invert
• XLR/RCA I/O

Adam Audio

• This is an 8" powered subwoofer capable of producing 60 watts (RMS) output. The subwoofer has a frequency response range of 50 to 250 Hz with a lowpass crossover filter, which can be adjusted from 50 to 150 Hz. Gain and frequency knobs on the control panel allow you to adjust the crossover filter and the power output for the optimum blend and balance of bass output with your stereo or surround speakers.
• The subwoofer has multiple input options, which allow it to be used with any existing stereo or 5.1 (or greater) amplifier system. For each input there is a corresponding output.
• High-level inputs accept a full-range signal from the amplifier's stereo speaker outputs. When connecting the unit as part of a 5.1 system, these would be taken off the Front Left and Front Right outputs in parallel to the standard pair of front speakers. The subwoofer provides its own power and includes impedance matching circuitry, so this will not reduce the power output to the front speakers or affect the overall impedance load on the amplifier.
• Additionally, the subwoofer has a set of right/left Line Level inputs. If using a standard stereo system, without a special subwoofer output, you can connect these to the left and right line level outputs on the amp. The subwoofer will then combine the signals to process the mono bass signal it needs to drive the speaker. If you are using an amplifier with a single mono subwoofer line level output, simply use an RCA "Y" cable to split the output and send it to the two line level inputs on the subwoofer.
• The subwoofer is housed in an attractive black wood cabinet that measures 13.75" x 11.75" x 11.75" (H x W x D). The driver and a 2 3/4" sound port are located on the front, covered by a black cloth speaker grill.

Monoprice

• POWERED SUBWOOFER FOR EXTRA BASS & PUNCH – A 10-inch dynamic balance woofer & a uniquely configured directed port provides accurate bass with added depth that brings your music and movies alive. A perfect solution for your small-to-mid size room
• LOUDER CLEARER SOUND EVEN AT HIGH VOLUME – Enjoy a thrilling yet balanced music experience with rich, deep sound, even at low frequencies. Blends easily with any speaker and plays the most demanding nodes effortlessly without any distortion
• Double the amplifier power to 100 watts of dynamic power with its in-built 50-watt RMS amp. Sophisticated engineering with best in class resonance-free driver materials make this sub highly durable and fit for extended use
• EASY TO INTEGRATE WITH EXISTING SYSTEMS – Hook up this sub to the receiver and upgrade your music sound instantly. Features continuously variable 80-160 Hz crossover and 40-160 Hz (-3dB) frequency response
• A sleek detachable grille on the front, speaker and line-level inputs as well as speaker-level outputs on the back, and a phase toggle switch for multiple subwoofers, make this sub cohesive and complete

Polk Audio