10 Best Shallow Subwoofer of December 2025

• Final impedance: 2 ohms.
• Thin profile is perfect for tight spaces.
• RMS power: 500 watts.
• 12-inch subwoofer enclosure.
• Max power: 1000 watts.

KICKER

• Rockville RW10CA 800 Watt 10" Slim Car Subwoofer.
• 800 Watts Peak / 200 Watts RMS. PWM MOSFET Power Supply.
• Low Level RCA Input. High Level Inputs with Auto Turn-On Technology.
• Adjustable Input Sensitivity. Soft Delayed Remote Turn-On.
• Thermal Protection Circuit, Short Protection Circuit.
• Overload Protection Circuit. Phase Switch: 0° or 180°.
• Low Pass Filter: 50Hz - 150Hz. Bass Boost: 0 - 18dB @ 45Hz.
• Subwoofer Level Remote Control. Built in Subsonic Filter @ 29Hz. Frequency Response: 20Hz - 150Hz. Sensitivity: 90dB @ 1w / 1m.
• Maximum Power RMS: 200 Watts. Impedance: 2 Ohm. Dimensions: 12.4 x 13.4 x 2.7 (L x W X H) Inches.
• Note: Kindly refer User Manual before use

Rockville

• Peak: 800 watts | RMS: 200 watts
• Overall diameter: 10. 55"
• Cutout diameter: 9. 50" top-mount depth: 3. 27"
• Connectivity Technology: Auxilliary
• Included Components: A Sub Woofer With Standard Accessories

Infinity

• Thin profile eclosure with loaded 10 inch subwoofer with single 2 ohm terminal
• Fits perfectly under or behind a vehicle's seat
• Features genuine CompC subwoofer with 600 watts max power, 300 watts of RMS power
• Custom ported design
• Box dimensions: 7.625 x 21.5 x 15 inches

KICKER

• Sold as a package - includes (2) Skar Audio vd-12 D4 12-inch Dual 4 ohm shallow mount subwoofers
• Peak Power: 800 watts (each) | RMS Power: 500 watts (each)
• Shallow mount subwoofer design - mounting depth: 4. 92" | Sensitivity: 85.9 dB
• Frequency response: 35 Hz - 300 Hz | 2" High temperature voice coil
• Pressed paper cone and stitched foam Surround

Skar Audio

• 12" Single 4 ohm Type-R Shallow Mount Subwoofer
• Peak Power Handling: 1800 Watts
• RMS Power Handling: 600 Watts
• Aluminum woofer cone, Santoprene rubber surround
• Cast aluminum frame, Radial finned heat sink

Alpine

• The Rockford Fosgate P3S series shallow mount subwoofers deliver Punch, designed to deliver big bass in a tight space, with its low profile mounting depth design
• The Punch P3SD4-10 is a slim 10” 4-Ohm DVC (dual voice coil) subwoofer with 300 Watts RMS / 600 Watts Max power handling and custom 10-AWG nickel plated push terminals
• Featuring anodized aluminum cones and dustcaps, with a unique spider venting design to keep the motor cooler and a new hybrid stamp-cast basket providing super strength while minimizing weight and resonance
• Optimized for both sealed and vented enclosures {Sealed (Vb): 0.5 cu. ft. (14.1 Liters) / Vented (Vb): 1.0 cu. ft. (28.3 Liters)/ Mounting Depth: 3.50 in. (89.0 mm) / Cutout Diameter: 9.06 in. (230.0 mm)}
• Famous Rockford Fosgate build quality with a full 1-year warranty when purchased from an authorized Rockford Fosgate reseller

Rockford Fosgate

• High-flow, low-noise port design
• Constructed with 5/8-Inch MDF
• 10 AWG input terminals
• These shallow loaded enclosures can fit in tight spaces due to the slim-line depth of 3.25 inch on the top and 5.25 inch on the bottom

Rockford Fosgate

• Stamp-cast basket with integrated spider venting
• Mica injected polypropylene cone
• Mounting Depth 3.4 Inches ; 12 AWG compression terminals
• 400w Power Handling ; Anodized aluminum voice coil former
• Linear spider with stitched 16 AWG tinsel leads

Rockford Fosgate

• 12" Shallow subwoofer 4-Ohm
• Mica-injected resin cone
• Handles up to 100-400 watts RMS (1500 watts peak power)
• Frequency response: 20-125 Hz
• Sensitivity: 93 dB

PIONEER