10 Best Router Lift of December 2025

• BUNDLE INCLUDES: JessEm Rout-R-Lift II Router Lift for Porter Cable, Dewalt and Bosch Routers with 3.5" Diameter Motors and JessEm 10-Piece Insert Ring Set with Caddy for Router Plates and Lift Systems
• COMPATIBILITY: This model is designed for use with Porter Cable 690/890, DW 610/616/618, Bosch 1617/1618, or any other routers with 3.5" diameter motors
• DOUBLE-SEALED BALL BEARING: Thanks to the a double sealed bearing to the spindle, the Rout-R-Lift II can smoothly raise and lower your motor with ease
• LIFT SHAFTS: The shafts are attached to the top plate and fasten in place with more than one screw spreading the lateral load and providing a very rigid and durable mount that will withstand the toughest routing operations
• STURDY CONSTRUCTION: All the machined components on the Rout-R-Lift II are CNC machined for durability

JessEm

• JessEm's 02311 Rout-R-Lift II router lift is compatible with the Makita 1011 router motor.
• Features a 9-1/4" x 11-3/4" Phenolic insert plate.
• Insert opening accommodates bits up to 3-1/2" in diameter and receives JessEm's reducing ring inserts.
• Comes with all mounting and leveling hardware, start pin, hand crank, 3 insert rings (2"., 2-1/2", and 1-3/8"), and 1 insert wrench.
• Additional insert rings available separately.

JessEm

• Maximum Router diameter: 4 1/4"
• Minimum Router diameter: 3 1/4"
• Phenolic insert ring diameter: 3 3/4"
• Router reducer collars (included): 3 1/4" & 3 1/2"

SawStop

• Exclusive Cam Locking System
• Double sealed bearing construction
• Bit Changes above the table for all routers
• Machined from 3/8-Inch solid aluminum and Hard Anodized for durability
• Fits most fixed base routers on the market today

JessEm Tool Company

• The JessEm 02312 Rout-R-Lift II is compatible with the Hitachi M12VC-KM2VC router motor.
• Features a 9-1/4" x 11-3/4" Phenolic insert plate.
• Insert opening accommodates bits up to 3-1/2" in diameter and receives JessEm's reducing ring inserts.
• Comes with all mounting and leveling hardware, start pin, hand crank, 3 insert rings (2", 2-1/2", and 1-3/8"), and 1 insert wrench.
• Additional insert rings available separately.

JessEm

• 2018 Wood Magazine Innov8 Award winner
• Make height adjustments 4 times faster with the Quick-Gear 4-to-1 gear box ratio—dramatically speeds up your bit changes
• Use the precision gear to make adjustments to within 0.001''—one hex wrench for both gears
• Push the button to release the insert ring for fast bit changes—no tools to search for; no screws to lose
• Two expansion bars beneath the plate are adjustable for a perfect friction fit with the table

Rockler

• BUNDLE INCLUDES: JessEm 02120 Mast-R-Lift II Router Lift with 9-1/4-inch by 11-3/4-inch Top Plate and JessEm 10-Piece Insert Ring Set with Caddy for Router Plates and Lift Systems
• BUILT-IN LOCKING MECHANISM: Mast-R-Lift II has a built-in locking mechanism from above the table. Using the same handle you raise and lower your router lift, a simple turn and you are ready for those heavy-duty, long term routing operations
• COMPATIBILITY: With a standard top plate, Mast-R-Lift II fits routers with 9-1/4-inch by 11-3/4-inch base using a unique adjustable clamping block system
• STURDY CONSTRUCTION: Mast-R-Lift II top plate is hard anodized. Hard anodizing is an engineered surface treatment providing a thick abrasion resistant coating and not just a cosmetic treatment that will wear off
• LIFT SHAFTS: The lift shafts are hydraulically pressed into a larger diameter mount. Attaching the shaft mount to the top plate spreads the lateral load, providing a very rigid and durable mount, standing up to the toughest of routing operations

JessEm

• Exclusive Cam Locking System
• Double sealed bearing construction
• Bit Changes above the table for all routers
• Machined from 3/8-Inch solid aluminum and Hard Anodized for durability
• Fits most fixed base routers on the market today

JessEm Tool Company

• Allows precise above-the-table setup changes for table-mounted routers
• Above-table collet access allows fast, easy, above-table bit changes
• 3⁄8" x 9 1⁄4" x 11 3⁄4" (9.5 mm x 235mm x 298mm) Hard-anodized aluminum plate won’t Sag, resists scratches
• Fits all Kreg Router tables and many competitive brands
• Bearing-guided carriage provides smooth operation

KREG