10 Best Miter Gauge of December 2025

• If you own a table saw and you need to make a crosscut at any angle then you know how valuable a miter gauge can be. You may also know that the miter gauge that came with your saw is not terribly accurate or durable. Not to mention that the fit in the miter slot may not be all that great as well. The Fulton Miter Gauge is a high quality, well thought out and economical solution to your table saw cross cutting needs.
• The .200” thick, adjustable, solid aluminum head is machined with 13 positive stop holes. 1 hole is at 90 degrees while the 6 holes on both sides are at 22.5, 30, 45, 60, 67.5 and 90 degrees. The positive stops are perfect for many woodworking projects as they are the angles that are typically used.
• To adjust the head you simply loosen the post knob handle, pull the spring loaded indexing pin outward, rotate the head to the desired position, release the pin and lock into place by tightening the post knob handle. The aluminum head has two ¼” x ½” slots milled into it for mounting a miter fence if so desired. The slots are approximately 1-1/8” from the base of the miter gauge head.
• The head is mounted to a solid steel miter bar that measure 18” in length and is .353” thick by .730” wide. Standard miter slots (not Craftsman or Sears branded items) are 3/4” x 3/8” with a 1/8” “T” slot (with slight variances from brand to brand) running the length on the bottom of the slot.
• The steel miter bar is equipped with a metal, removable retaining disc that measures 7/8” in diameter and is just shy of 1/8” to fit into to the “T” slot to prevent accidental lifting when feeding your stock through. If your saw does not have a “T” slot, you can remove the disc. The steel miter bar is also equipped with spring loaded, adjustable plungers on the side of the bar. The plungers can be adjusted with the provide hex key wrench in or out to provide you with the ideal fit.

Fulton

• MITER GAUGE - This adjustable aluminum support plate is a perfect locking mechanism and helps your workpiece cut at the precise angle you want.
• VERSATILE - Whether you have a band saw or table saw this miter gauge will work well and help you achieve the perfect cut.
• STANDARD T-SLOT - Correct your cuts with this adjustable aluminum support plate. It fits standard T-slot ¾” x ⅜” miter slots.
• EASY TO USE - Don’t ever make a mistake cutting a straight line again. This miter gauge is easy to use and you will see results immediately.

RIKON Power Tools

• Includes (1) 2610011708 Miter Gauge
• New, Bulk Packed
• Genuine Skil Replacement Part
• Consult owners manual for proper part number identification and proper installation
• Please refer to list for compatibility

Skil

• Miter Protractor "O" ring insures smooth and precise operation, takes error-prone calculations out of the process of miter cuts.
• Direct read from the work to your miter saw with two easy to read scales
• Easy-to use tool has two laser engraved scales
• Protractor saves time and reduces waste

iFJF

• This is an O.E.M. authorized part
• Fits various Porter Cable models
• OEM Part Number 514007535
• This is a Porter Cable replacement part
• Part Number 514007535

PORTER-CABLE

• This part is compatible with models including; 34-710,34-440 (90C12580 THRU 95H98459),34-440 (88J00000),34-440 (95H98460 & HIGHER),34-440 (SN88J00001 THRU 90C12579)
• This is a manufacturer substitution. Part may differ in appearance but is a functional equivalent to prior parts including; 34-895,422-04-004-0001,50-864,34-928
• Genuine Original Equipment Manufacturer (OEM) part. Compatible Brands: Delta
• This miter gauge assembly (part number 34-929) is for table saws
• The assembly may include multiple parts; refer to your parts diagram for a complete list of parts included

Delta

• Miter Gauge featuring 27 angle stops for precise incremental control
• No-nonsense design and compact size
• Delivers extreme miter cutting accuracy
• Four expansion points adjust for zero side play
• Universal Mounting Bracket supports any user-made fence

INCRA

• INCLUDES: (1) Table Saw Miter Gauge
• FUNCTION: Provides you with a premium table saw miter gauge replacement that allows you to make crosscuts at any angle with high precision
• FEATURES: Positive stops at all common angles for exceptional accuracy, a large ergonomical grip for control and comfort, set screws to remove any play, and a tip resistant washer to keep the unit steady when extended over your work surface
• COMPATIBILITY: Fits and accommodates most standard 3/4 x 3/8 inch miter slots, with or without t-slotted miter slots, including DeWalt, Delta, Jet, Craftsman, Bosch and other brands of table saw and router table slots
• PREMIUM BUILD: Made with a combination of a high quality aluminum head and solid steel miter bar, this woodworking gauge was built for professional use and long-term durability

POWERTEC

• The Fulton Miter Gauge is a high quality, well thought out and economical solution for your table saw cross cutting needs.The Aluminum Miter fence is equally well thought out with its 45 degree ends for unsurpassed workpiece support and its ability to mounted to most any miter gauge. Also included is a handy aluminum flip stop for repetitive angled cuts on your table saw. Together these three items are the perfect compliment to each other for your table saw cutting needs.
• The .200” thick, adjustable, solid aluminum head is machined with 13 positive stop holes. 1 hole is at 90 degrees while the 6 holes on both sides are at 22.5, 30, 45, 60, 67.5 and 90 degrees. The positive stops are perfect for many woodworking projects as they are the angles that are typically used.To adjust the head you simply loosen the post knob handle, pull the spring loaded indexing pin outward, rotate the head to the desired position, release the pin and lock into place.
• The head is mounted to a solid steel miter bar that measure 18” in length and is .353” thick by .730” wide. Standard miter slots (not Craftsman or Sears brands) are 3/4” x 3/8” with a 1/8” “T” slot (slight variances from brand to brand) running the length on the bottom of the slot. The steel miter bar is equipped with a metal, removable retaining disc that measures 7/8” in diameter and is just shy of 1/8” to fit into to the “T” slot to prevent accidental lifting when feeding your stock through.
• Made from a single piece of extruded aluminum, this precision miter gauge fence is not only durable, its accurate and saves setup time. The fence is designed to be used with most any miter gauge with its off-set mounting track on the back of the fence. The off-set track allows you to flip the fence for lower profile miter gauge mounts and flip back for standard height miter gauges. The fence can be mounted to older miter gauges by adding a wooden block mount with wooden screws if necessary.
• Both ends of the fence are cut at exactly 45 degrees. This allows you to position the fence extra close to the saw blade (with the power turned off) so you have even more control over the workpiece you are cutting. The fence comes with a flip stop that makes repetitive cuts a breeze. When not in use the flip stop can be flipped up and out of the way. Also include are two sticky back measuring tapes. 1 tape is left to right reading and the other is right to left reading.

Fulton

• Table saw that delivers perfect miter cuts the first time
• Solid-steel laser cut protracter head and gold anodized Track Fence
• 1 angle stop with indexed stops every 5-degrees
• Precision angle indexing teeth
• 6 expansion points that allow for adjustments to both sides of the bar for ZERO side play

INCRA