10 Best Digital Angle Gauge of December 2025

• Press the ZERO button to calibrate the angle gauge to any reference surface.
• Resolution: 0. 1 degrees
• use 1 AAA batteries for superior battery life.
• Range: +/- 180 degrees

Wixey

• Digital protractor angle gauge finder, upright LCD display, direction symbol with magnetic base, flip display to view angle in any direction
• This digital angle gauge finder protractor comes with data hold function and bottom magnets
• Quick calibrate and convert - Press calibrate button to convert between absolute and relative measurements
• Press UNIT button to convert between degree/ percentage of slope
• This digital protractor angle finder gauge is powered by 2 x CR2032 battery( you'd better prepare a new one)

FstDgte

• ☛【High Accuracy】 Accurate to the ±0.1° at 0° and 90° and ±0.2° from 1-89°.; displays angle and bevel readings in degrees, pitch IN/FT, mm/M, and percent slope.It helps your work more easier.
• ☛【User Calibration】The device is calibrated in the factory. You don't need to re-calibrate it again. Of course, you can recalibrated it easily if felt necessary. Super easy to set up and use.
• ☛【Upgrated Zero Function】Unlike tradictional digital angle gauge, This inclinometer / protractor lets you set or check relative angles between surfaces.It also works as a true digital bubble leve.
• ☛【V-Groove Magnetic Base】Neodymium magnets and v-groove base firmly attach to ferrous metal surfaces like conduit, pipe, steel construction framing, metal fabrication and more.
• ☛【Upgraded LED Display】Values and bubble can be clearly and easily read on the LED display even in harsh working environments and sunlight.It also has a HOLD button to freeze the display for easier reading.

2PM TOOLS

• Super large reversible LCD display. Tracing absolute level
• Flip display to view angle in any direction
• Displays relative/absolute angles in degrees or tilt percent. Measure range: 360 degrees (4 x 90)
• Embedded super strong magnets on three sides
• Dimensions: 2.13" x 2.13" x 0.91"

iGaging

• DURABLE - Commercial grade digital sliding T-bevel and digital protractor with impact resistant ABS handle
• HOLDS MEASUREMENTS- on digital angle finder for transfers between different surfaces or jobs
• TRANSITIONAL DISPLAY - Digital angle gauge has a reverse display button and flip display button with a locking knob for manual measurement transfer. Full LCD display with large digital angle readout.
• DUAL APPLICATION - T-bevel/digital protractor combo- is made with an ergonomic impact resistant handle with 8-inch stainless steel blade used for taking measurements
• AUTOMATIC SHUT-OFF- feature that preserves battery life of the woodworking tool

General Tools

• SPECIFICATION: Measuring range: 4 x 90°; Accuracy: 0.1°; Working temperature: 32°F ~122°F; working humidity: ≤85%
• ENERGY-SAVING: One 1.5V AAA battery working for more than 50 hours.
• WIDE APPLICATION: Auto repair, machine manufacturing, constructional engineering, and decoration, etc.
• COMPACT & LIGHTWEIGHT: Constructed of aluminum alloy and ABS, this angle finder is compact and lightweight.
• BACK LIGHT DISPLAY & MAGNETIC BASE: Large digital LCD display with backlight for convenient operation at night; magnetic base allows to be attached to metal surface.

CO-Z

• DUAL FUNCTIONALITY -- this tool can be used as both a bevel gauge and a digital level for carpentry. As a bevel gauge, it measures angles for woodworking. The AccuMASTER is compact, allowing it to fit into tight spots so you can get measurements you need to Perfect your project. It can also be used in welding, fabrication and even automotive tire alignment
• EXACT & EASY TO READ -- the AccuMASTER' s bright backlit Stay glow(tm) display will never leave you in the dark and features large numbers, making it easy to read. No more eye-balling important measurements — this handy tool gives exact numbers so you can make the most precise of cuts with confidence. Its improved MEMS sensor increases battery life so it’s always ready for use, No matter how long it’s been in the tool drawer.
• STRONG MAGNETIC BASE -- with its powerful magnetic base, this digital protractor can easily and firmly attach to miter saw, band saw, and table saw blades. You can also use it on fences, tables, and any other metallic surface. Thanks to its strong magnet, you no longer have to worry about holding the tool in place while taking measurements.
• CERTIFIED IP54 RATING -- this woodworking tool is IP54 dust and water-resistant so it can be used in any professional woodshop, garage, or backyard shed. This measuring accessory is just what you need to go from a novice woodworker to a master carpenter. No matter your experience level, this tool will help you complete any project.
• PROTECTIVE POUCH -- with your order, you’ll receive the AccuMASTER digital level with AAA batteries as well as a protective Pouch with a belt loop. Now you can keep your inclinometer and angle device within reach at all times, no matter where you are. It’s especially useful for completing work on a ladder, roof, or other precarious positions. TWO-YEAR WARRANTY

Calculated Industries

• 【Great Repeatability and Consistency】This angle gauge is designed with accuracy of ± 0.2° and the resolution is 0.1°. The measuring range: 0 to 360° (4*90°). Display unit: DEGREE only. It provides convenience in woodworking, construction, machinery, telecommunications, automobile etc. It is pre-calibrated in factory.
• 【Strong Aluminum Framework】The digital angle gauge applied sturdy aluminum alloy instead of plastic for the main framework. It’ll provide years’ usage.【Two Measuring Mode】①Checking the true level. ②Checking the relative angle between two surfaces.
• 【Lower Power Reversible LCD Display with ERROR indicator】 The Digital Angle Gauge has a large LCD display with backlight, which only needs one battery for providing accurate, quick and clear measurements and even you can easily read in dark environment. If the digital angle gauge is used in an incorrect position (e.g. tilts diagonally over 30 degree), display will tell ERROR to make sure that use is getting the accurate measurement.
• 【Easy Battery Installation】You can install battery easily and need no screwdriver. WIth only one AAA battery, the digital angle gauge works 50 hours averagely. *Automatic shut-off after 5 minutes.
• 【Packing contains】Digital angle gauge*1, 1.5V Alkaline battery*1, storage pouch*1, instruction*1

GemRed

• This Digital Angle Gauge and Level can measure or set angles, check relative angles, or can be used as a digital level
• High visibility reverse contrast display improves visibility in dimly lit work environments
• Strong magnetic base to attaches to conduit, pipes, saw blades, vents, ducts, and other ferromagnetic surfaces
• V-groove edges enable optimal alignment on conduits and pipes for bending and alignment
• 0 to 90-Degree and 0 to 180-Degree measurement ranges facilitate multiple and diverse applications

Klein Tools

• 【4 Sided Magnetic Digital Angle Finder】Built in strong magnets on the base and sides, this mini level angle finder is more convenient than other models. GOXAWEE angle gauge can firmly attach to fence and other ferrous material surface, which can be easier when you are trying to work with multipe angles.
• 【Quick & Accurate Angle Gauge】This woodworking angle measuring tool is designed with an accracy of ±0.2°, and the resolution is 0.1°to make precise convert between the absolute and relative measurement mode. Moreover, there are also 4 units of measurement to switch as your special need: degrees, in/ft, mm/m, percent slope, helps you save a ton of time setting the blade angles of lathes, table, miter, band, chop & circular saws for a cut and alignment.
• 【Large LCD Display for Easily Reading】This bevel gauge has a large LCD dispaly which allows you to read angles in degrees from 0° to 360° easily and clearly. The display also flips to ensure that you can read angles in any direction with ease.
• 【Easy to Use】Constructed of thick ABS plastic material, this camber gauge is sturdy and durable, compact and lightweight, convenient to carry around from job site. The angle cube has the four function buttons of on/ off, unit, calibration and hold make your operation simple.
• 【Wide Application】The digital angle gauge device combines both an inclinometer and a protractor to be able to get all of the measurements that you want. Ideal digital angle gauge for construction, carpentry, welding, drilling machinery, masonry, knife sharpening, auto repair and many other fields.

GOXAWEE