10 Best Manual Impact Driver of December 2025

• A MUST-HAVE FOR YOUR SET: Our OEMTOOLS screwdriver set is an essential for any tool kit with its flexible pieces and reversable drive
• EASY STORAGE: Our impact driver kit comes with a handy case with fitted spaces for each piece of the kit. The case has plastic clamps for a secure closing lock
• PROTECTION FOR YOU: Our top priority is your safety. Our impact driver has a double-layer contact pad on the handle to protect your hand from hammer strikes. Also, the non-slip rubber helps your working hands to stay secure
• NO MORE STUCK FASTENERS: The 1/2” square drive is for use with impact sockets and comes with multiple attachments. So, no matter the size of the fastener, our driver can remove it
• BACKED BY : Our manual impact screwdriver is built to last, but in case anything happens to your product, this hand impact driver set is covered by the OEMTOOLS Limited Lifetime

OEM TOOLS

• Easily loosens frozen/rusted screws, nuts or bolts
• Tightens fasteners without stripping
• 5 bits for slotted and Phillips fasteners
• Full Lifetime Warranty, refer to "Warranty & Support" section below for full details

Craftsman

• Fuel system diagnostic kit #10
• Tool solutions for most all situations
• Built to exceed tool standards
• When you have frozen or rusted screws to break loose, there's no substitute for an impact driver.
• Highly durable
• For loosening frozen fasteners using a hammer
• Includes two slotted and two Phillips bits
• Meets or exceeds ANSI standards Lifetime warranty

Alltrade

• Rugged, hand-impact driver turns rusted, frozen, or other stubborn screws
• Includes 3/8-Inch (10 mm)-square-drive fitting adapter for 5/16-Inch hex bits and four assorted hex screwdriver bits (5/16-Inch (8 mm) and 1/2-Inch (13 mm) regular slotted tip, #2 and # 4 Phillips-tip)
• Can also be used on 3/8-Inch (10 mm) square-drive impact sockets
• Internal, spring-loaded, helical design transforms the impact of a hammer blow to up to 200 foot-pounds of shock torque
• Easily reverses for tightening or loosening screws

Klein Tools

• SET INCLUDES: This set includes one 3/8-inch impact driver, one 3/8-inch drive bit chuck, two Flat Bits (5/16- and 3/8-inch), two Phillips (#2 and #3), and one storage case. The impact driver has corrosion-resistant chrome plated finish with non-slip knurled grip, and the bits have precision-milled tips for exact fit.
• HOW IT WORKS: When you strike the top of the tool with a hammer, the drive tang is turned 20° in the direction you have set the tool. You can use this driver with impact sockets and on nuts, bolts, and other fasteners. If you need additional or replacement bits, try picking up an ARES 70013 Impact Bit Set.
• COMMON APPLICATIONS: Instant impact force loosens rusted or frozen screws without damaging them, so you can save yourself the hassle of having to drill and tap stubborn fasteners, whether you're working on a brake job or changing a rotor.
• RELIABLE | EFFECTIVE | EFFICIENT: Users trust ARES to be quality tools. You are backed by our Performance Assurance Limited Lifetime Warranty. If you have any issues with your ARES Manual Reversible Impact Driver, simply contact customer service for troubleshooting help, parts, replacement, or refund. Need a manual? Download it for free on our website!
• ASPCA BUSINESS AMBASSADOR: We are proud to be part of the ASPCA Business Ambassador Program. If you have a pet, you realize they are more than a pet, they are part of the family. With your support, we're proud to help this great organization

ARES

• Loosen rusted, damaged or frozen nuts, bolts or fasteners without damaging them
• Impact driver features forward and reverse function for tightening and loosening
• Driver also has a corrosion-resistant chrome plated finish with a comfortable non-slip knurled grip
• Driver is one of the smallest on the market and is ideal for use in hard to reach areas
• Set includes three 1.96 inch/50mm screw extractors (2.5mm to 4mm, 4mm to 6mm, 6mm to 8mm), one 1.96 inch/50mm flat bit (1.0mm x 5.0mm) and two PH bits (PH1, PH2)

Teng Tools

• [Reverse Impact Driver Bit Set] Loosen rusted or frozen screws, or repair door locks, auto body fenders, and more by driving new screws with the ABN 1/2-inch Manual Impact Driver Screwdriver Punch Set
• [Tighten or Loosen any Screw] Dual-action reverse impact screw driver tool allows you to adjust towards the right to tighten screws or towards the left to loosen a screw; Single letter engravings, “L” and “R”, on handle ensure easy identification
• [High Torque Impact for Easy Use] Insert a bit into the hex bit adapter chuck then strike the end of the impact screw driver tool with a hammer; High torque force will drive screw 20 degrees in the direction your manual impact wrench is set
• [Built to Last] Chrome-plated impact manual driver ensures optimal strength and resistance to corrosion, while the knurled handle provides a sturdy grip on 1/2-inch precision-milled manual impact driver bits
• [Content] Manual impact screwdriver kit includes (1) handheld impact driver tool, (1) bit adapter, (2) Philips bits (No. 2 x 36mm and No. 3 x 36mm), (2) Flathead bits (8mm x 36mm and 10mm x 36mm) and a plastic storage case; Compatible with other 1/2-inch sockets and bits

ABN

• Set Includes: Driver, 10 Bits, 2 Bit Holders and Case
• Designed to loosen hard to turn bolts and nuts
• Hand impact driver has heavy-duty spring for added torque
• The TorquePlus design allows for quick and easy socket engagement to the fastener flats, not the corners
• Popular interchangeable bits are packaged in plastic blowmolded box for easy storage, Made in USA

Proto

• ✔ Package Includes: 1Pcs 1/2" Reversible Impact Driver, 1Pcs 1/2"Drive Bit Chuck, 6Pcs Superior S2 Bits (each of Long PH1, PH2, PH3, SL8 & Short PH2, SL8.) and convenient Storage Case. This unique manual impact driver converts hammer strike into powerful torque force, to loosen stubborn or rusty screws or tighten critical screws. Also works well on nuts bolts and other fasteners(requires proper 1/2" sockets)
• ✔ Reversible Impact Driver ✔ By pressing and turn chuck towards ""L"" or ""R"", you could set the direction of torque, so you could use this reversible impact driver to loosen or fasten a screw even rusty. Besides, work with most 1/2"" impact sockets(NOT included) you could use this manual impact driver on nuts, bolts, and other fasteners, including loosening frozen bolts, rusted fasteners and corroded brake calipers without damage.
• ✔ Superior S2 Screwdriver Bits ✔ S2 steel reachs superior hardness HRC58-62 by high temp quench, much harder than CR-V steel (hardness HRC48-52). These S2 screwdriver bits stand larger impact force and twisting force, prevents screw slide or abrasion, and no more twisty or broke bits.
• ✔ Advanced Heavy Duty Impact Driver ✔ Instant impact force converts to high torque. Heavy duty integrated steel body with larger and thicker bottom to bear large impact force, without losing shape. Equiped with Non-slip Protective Shell to help you hold the driver firmly and prevent accident hurt to hands.
• ✔ Great Servcie ✔ This Upick Reversible Impact Driver is warranted for 12 months. If you nee help, you are always welcome to contact us so we could solve the probem asap.

U-pick

• Instant impact force loosens rusted or frozen screws without damaging them
• Forward and reverse drive direction
• Drives included screwdriver bits or any 3/8 in. drive impact socket
• Comfortable handle with non-slip knurled grip
• Frees corroded brake caliper screws and other vehicle or outdoor fasteners exposed to the elements

TEKTON