10 Best 18v Impact Driver of December 2025

• LED LIGHTING: Keep your work illuminated with the LED lighting array located just below the quick-connect chuck
• TEXTURED HANDLE: The compact design of this power tool is complemented with the textured rubber grip, which gives you superior handling, even in slippery conditions
• VARIABLE SPEED TRIGGER: Apply pressure to the trigger to match the amount of power you need on the job. This can drive the motor to create up to 3,450 impacts per minute
• REDLINK TECHNOLOGY: Electronics inside the impact driver communicate with the M18 batteries that power it to reduce the risk of overheating, which results in more efficient work
• M18 COMPATIBLE: This cordless Milwaukee impact driver works with the M18 family of lithium ion batteries. Compatible models include the 48-11-1860, 48-11-1850, 48-11-1828, and 48-11-1815, 48-11-1840, 48-11-1820

Milwaukee

• Increased visibility: Has built in LED with 20 second delay after trigger release
• Ergonomic design: Compact (5.55 inches front to back)and lightweight (2.8 pounds) design fits into tight areas
• One handed bit loading: Has a 1/4 inch hex chuck and accepts 1 inch bit tips. No load speed: 0 2,800
• Reliability: Tools backed by a 3 year limited warranty. Anvil type quick release
• Includes: (1) DCF885 impact driver, (1) 20 volt max battery (1.5 Ah), and (1) fast charger
• Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18

DEWALT

• Ergonomic design: Lightweight tools designed to fit the user’s needs
• Increased Visibility: The DCF885 features a built in Led with 20 second delay after trigger release
• Includes: (1) DCD771 drill/driver, (1) DCF885 1/4 inches impact driver, (2) 20V Max Lithium Ion 1.3 Ah battery packs, 20 volt max charger, and (1) kit bag
• One handed bit loading: The DCF885 has a 1/4 inches hex chuck and accepts 1 inches bit tips, Power Tool type: Cordless
• High performance motor: The DCD771 delivers 300 Unit Watts Out (UWO) of power ability completing a wide range of applications

DEWALT

• Compact design: provides excellent balance and control, ideal for overhead applications or work in tight spaces
• Milwaukee brushless motor: optimized for efficiency, this motor delivers more run-time and longer life
• Includes: 2850-20 M18 1/4 in. Hex impact driver bare tool
• Compatible with all M18 batteries
• Bare Tool Battery and charger not included

Milwaukee

• Quick shift mode uses the Brushless motor’s electronic controls to find the best balance of speed and torque for each application for more efficient fastening
• BL Brushless motor delivers 3, 600 max RPM and 1, 600 inches pounds of max torque
• 4 Speed power selection (0 1, 100/ 0 2, 100/ 0 3, 200/ 0 3, 600 RPM & 0 1, 100/ 0 2, 600/ 0 3, 600/ 0 3, 800 IPM) provides precise fastening control for a wide range of applications
• Additional one touch 4 speed power selector button under the chuck for added convenience
• Assist mode (a mode) feature helps eliminate "screw came out" And "cross threading" By driving at low speed until tightening begins

Makita

• Included: (1) Ryobi P235A 18V ONE+ Impact Driver (bare tool ONLY)
• Features a variable speed trigger and 1,800 in./lbs. of torque
• Delivers up to 3,200 impacts per minute
• Change bits quickly & easily with the 1/4 in. hex quick connect coupler
• Compatible with Ryobi 18-Volt ONE+ Lithium-Ion Batteries and Charger (NOT included - sold separately)

RYOBI

• VARIABLE SPEED TRIGGER: Simply pull the trigger further back to increase the rate of impacts with this driver. No knobs or switches necessary
• MAGNETIC BIT TRAY: If you’re high up on a ladder where you don’t want to be fumbling with screws or bits, you can keep them on the tool’s magnified base
• QUICK CHANGE CHUCK: No tools necessary to replace bits. Simply press the bit in to lock it, and when you’re finished, pull back the chuck cuff to release
• THE NOTCHED, RUBBERIZED OVERGRIP allows you to keep a firm hold on your power tool, even in slippery conditions
• ONE+ COMPATIBLE: You can use this right out of the box if you have any of the following Ryobi 18V One+ Batteries: P100, P101, P102, P103, P104, P105, P107, P108

Ryobi

• This refurbished product is tested and certified to look and work like new. The refurbishing process includes functionality testing, basic cleaning, inspection, and repackaging. The product ships with all relevant accessories, and may arrive in a generic box

Ridgid

• Compact Impactor design for increased maneuverability in tight spaces and extended comfort
• Electronic Cell Protection (ECP) unique battery pack design and customized electronics to deliver optimal battery life and performance
• Built-in LED light - great for dark corners or enclosed areas
• Designed hammer and anvil system produces 1,500 In./Lbs. of dynamic torque
• Battery and charger sold separately
• 25-Percent lighter than the competition
• Most compact - 25-Percent shorter than the competition. The most compact design - Only 5-7/10-Inch Long
• Faster and more torque - 2,800 RPM and 1,500 Inch/lbs of torque
• Highest BPM in category - over 3,200 BPM
• Led light - for use in dark areas

Bosch

• BL Brushless motor delivers 1, 500 inches pounds Of max torque
• Variable speed (0 3, 400 RPM & 0 3, 600 IPM) for a wide range of fastening applications
• The BL Brushless motor eliminates carbon brushes, enabling the BL motor to run cooler and more efficiently for longer life
• Efficient BL Brushless motor is electronically controlled to optimize battery energy use for up to 50 percentage longer run time per charge
• The electronically controlled BL Brushless motor efficiently uses energy to match torque and RPM to the changing demands of the application

Makita