10 Best Dual Extruder of December 2025

• 【Independent Dual Extruder Design】Our TL-D3 Pro dual extruder 3D printer has dual nozzles independent of each other, so you can print in dual material/duplication/mirror mode. With dual material printing mode, you can get two color models. Choose duplication or mirror mode, you can get two models of the same color or different colors.
• 【Upgrade Borosilicate Glass Bed】TENLOG upgrade borosilicate glass bed enable prints adhere better without the warping.ultra smoothness even on the first layer,the model can be Pick up by hand after cooling.
• 【Self-developed Silent Motherboard 】The TL-D3 Pro built-in self-developed silent motherboard tmc2209 driver, which has stronger anti-interference, faster and more stable motion performance, silent printing and low decibel operation.
• 【Easy to Assemble】It comes with several assembled parts. You can assemble the 3D printer in 3 steps, with its user manual, in about 5 minutes.
• 【Metal scraper】 when using dual-material mode, the metal scraper is afraid that it will wipe the remaining filament on the nozzle, so there is no need to use a Enable Ooze Shield and a Enable Prime Tower to print the dual-color mode.

TENLOG

• 💥 NEW FEATURE for Filament Run Out Detection Two Filament Sensors detect the 2-way feed filaments and no longer worry about running out of filaments. When any filament runs out, the nozzle will automatically rise and will not stick to the model.
• 💥 DUAL MATERIAL PRINTING Temperature, Extruder speed, printing speed, and infill density are separately set for each nozzle. Even with different diameter nozzles, the TL-D3 Pro 3D printer can seamlessly print.
• 💥 SAME TIME Duplication mode printing, mirror mode printing, printing efficiency doubled, design 1 get 2!
• 💥 TOUCH SCREEN 4.3-inch 480*272 Resolution Full Color Capacitive Touch Screen
• 💥 SUPPORTED FILAMENTS TPU, PVA, PLA, ABS, HIPS, WOOD, PETG, FLEXIBLE

TENLOG

• Dual color metal hotend extruder kit for CR-10 series Ender-3 3D Printer.
• 0.4mm nozzle; 1.75 filament size; aluminum heating block; heater wire 12V/24V for option.
• Can access two type of filament, switch between two input when printing, and extrude through a hot end.
• Color switching is fast and stable, and print quality has no obvious defects.
• The heating block and the heat sink are connected and fixed by two screws, making the print head is more stable.

Aibecy

• Large Build Volume: Ultra-large forming volume allows you to print single model up to 300*300*340mm, or two of the same/mirrored model at the same time up to 111*300*340mm by utilizing its "duplicate" or "mirror" mode.
• Quick Nozzle Replacement: Featuring an Extruder module with an innovative one-button "Nozzle Ejectable" system, easy to swap nozzles, or quickly replace the nozzle in the event of a clog.
• Dual Z-axis Design: Two Z-axis screws and stepper motors drive the vertical axis of the Artist D that will improve accuracy and precision, resulting in a specified Z-axis accuracy of 0.001mm to make this a truly professional level printer. 
• Filament Runout Detector: In the event of your filament running out, Our Artist D will detect this and pause your print so you can fit a new spool of filament and resume the print, saving you from failed print disaster. Power Resume Printing: Use the Printing Pause option if you want Artist-D to stop printing immediately or change filaments of different colors or materials.
• Easy Assemble: The Artist-D requires no special skills to assemble. If you’re a DIY enthusiast, you love things that are simple but spectacular.  Linear Rail: It is built with industrial-grade parts—such as the X-axis linear rail—to deliver smoother performance with less friction and higher precision.

JG MAKER

• 【Mix-Color Printing Function】Dual extruder module and 2-in-1-out hot end- Dual extruder realize printing multiple colors on same piece, allow you customize colors, DIY unique colors .
• 【Printing-Resuming】A10M 3D Printer come with filament detector and break-resuming capacity, if the electrical power is off, prints can be resumed from the last layer, save your time and reducing the waste.
• 【Fast-Assembly】GIANTARM A10M Mix-Color 3D Printer come with 90% Pre-assembly, the modularized design provide you with easier assembly.
• 【Large Printing Area】A10M Keeping Prusa I3 Printer gantry with 220*220*260mm³ makes the best of the building platform guaranteeing excellent printing quality for big printing project.
• 【Technical Support】We provide life-time technical assistance and 24hour professional customer service, please free to contact us with any question about the 3D Printer.

GIANTARM

• INDEPENDENT DUAL EXTRUDERS - E2 features Raise3D’s IDEX technology, which allows the printer to produce two models at once. Use Duplication Mode to use both extruders in synchronized printing, or Mirror Mode, which produces a model and its inverse simultaneously.
• EASY SET UP, EASY TO USE - E2 features auto bed leveling technology and a video-assisted offset calibration system that guides users through a simple process to verity that the E2 is geometrically aligned. The on-board 7” touchscreen, intuitive visual interface, and on-screen assistance makes 3D printing with the E2 a user-friendly experience.
• NEVER LOSE A PRINT - E2 features filament run-out sensors that automatically pause the printer if it runs out of filament material, and power loss recovery that automatically stores task progress and seamlessly resumes the most recent task when power is restored.
• COMPATIBLE WITH A VARIETY OF MATERIALS - E2 works with a wide variety of 1.75mm filament materials, including PLA, ABS, HIPS, PC, TPU, TPE, Nylon, PETG, ASA, PP, PVA, glass fiber infused, carbon fiber infused, metal fill, wood fill, and others that work within E2’s 300℃ temperature range.
• AND THERE’S SO MUCH MORE - E2 features up to 13x9.4.9.4 inch build volume, a flexible build plate for easy model removal, a heated print bed (up to 110℃), Wi-Fi and ethernet connectivity with a live camera for remote monitoring, and HEPA air filtration.

Raise3D

• Full manufacturer's warranty fulfilled by Flashforge, and free email support provided by expert FlashForge technicians
• A sturdy metal frame that is substantially more stable than the Creator's original wood frame.Build volume 8.9 X 5.8 X 5.9 inches
• Aviation level aluminum plate with a thickness of 6.3mm guarantee its surface is completely flat and will not warp during heating process
• Metal platform support plus 10mm guide rod ensure a precise Z axis movement and prevent platform arm from deforming. Filament Compatibility- PLA, ABS, PLA Color Change, Pearl, ABS Pro, Elastic, PVA, HIPS, PETG, TPE, TPU, Conductive Filament, Flexible Filament, Metal Filled Filament, Wood Filled Filament, and PP
• Enclosed chamber insulates and protects ABS prints.Filament Diameter:1.75 mm [0.069 in]
• Please refer the user manual below for better use

FlashForge

• ✔️【Unique Double Color Printing】2 extruder module and 2-in-1-out hot end, which deliver 4 types of printings--Single color, Double color, Graded color and Mixed color, which will greatly enrich your 3D printing experience.
• ✔️【20 Minutes Self-Assembly】The modularized design divided the printer into 6 modules--Gantry kit, Bottom kit, Extruder motors, PSU kit, LCD display kit, Filament holder kit, what all you need to do is to tighten screws, connect wires correctly and fine-tune belt tension and adjust heat bed when necessary. The whole process takes about 20 minutes.
• ✔️【GT2560 V4.1b Marlin Control Board】Using Marlin firmware, stable and easy to operate. It will support auto-leveling function. All what you need to do is to order a 3d touch/bl touch, connect the sensor with A10M, update the firmware and then simply debug.
• ✔️【Filament Detector and Break-Resume】The filament detection system will alert you to change filament when the printer runs in air or the spool is empty. The resurrection system is added to save real-time printing status and to resume the printing job exactly at the same place where it has been stopped.
• ✔️【After-sale Services】 Lifetime technical assistance. If you have any problem, you can reach out us via E-mail/FB.⎃⎃⎃⎃DEAR CUSTOMERS: If you have any problem, please contact us at the FIRST time,we will try our BEST to help you solve problems.you can reach out us via E-mail/FB.⎃⎃⎃⎃

Geeetech

• 【Independent Dual Extruder Design】Our Hands 2 Dual Extruder 3D Printer has double nozzles that are independent of each other, allowing you to print in duplication and mirror mode. You can also choose two different colors or materials to create at the same time or print with soluble support (such as PVA) to precisely implement models that are difficult to lay down.
• 【Upgrade Borosilicate Glass Bed】TENLOG upgrade borosilicate glass bed enable prints adhere better without the warping.ultra smoothness even on the first layer,the model can be Pick up by hand after cooling.
• 【Self-developed Silent Motherboard 】The Hands 2 built-in self-developed silent motherboard tmc2208 driver, which has stronger anti-interference, faster and more stable motion performance, silent printing and low decibel operation.
• 【Easy to Assemble】The printer comes with several pre-assembled parts. You can assemble the 3D printer in 3 steps, with the user manual, in about 5 minutes.

TENLOG