10 Best Bowden Extruder of December 2025

• ✔️【Transparent color】It is easy to observe the working status of the extruder, and also very stylish and beautiful.
• ✔️【Upgraded】WINSINN Dual drive Bowden extruder has an internal transmission ratio of 3: 1 and high accuracy, and we recommend E-steps: ( Image 3)
• ✔️【Compatibility】Suitable for most DIY 3D printers, such as Creality CR10, Ender 3 series, Wanhao D9, Anet A8 E10, Geeetech A10 3D printer high-performance upgrade parts.
• ✔️【Filament】For 1.75mm Filament, especially those who want to print soft filament like TPU. All other filament is suitable as well: PLA / ABS / PETG / NYLON / CARBON FIBER / WOOD etc.
• ✔️Made by WINSINN, make sure the "WINSINN" label on the box for our after-sales service.

WINSINN

• Original aluminum alloy driver feed for CR-10/CR-10S/CR-8/CR-7, it is stable and durable.
• Full metal aluminum alloy,diy aluminum block, need to assemble by yourself
• With better stronger pressure pushing the filament into the printer nozzle
• High Quality：Metal extruders are more resistant to corrosion than plastics with anti-rupture and better squeeze.
• It will also allow to print faster with sustained quality and no risk for grinding the filament.

Creality

• Widely used in different type 3d printer ,it can be applied to bowden extrusion and MK8 extrusion as well.
• Material:Aluminum.
• Extrusion gear:26 teeth.
• NOTE:Stepper motor is just for reference ,NOT include in the packge

Redrex

• This BMG extruder kit comes with extra 1m PTFE bowden tube (OD 4mm & ID 2mm), tube cutter and two tube connector cliper
• ➤➤➤Pls free the extruder arm before inserting filament◄ close the extruder arm & tight up the screw, then roate the white gear to push filament to be on track, gears will properly be engaged, no binding or stiffness issue any more its printer.
• ✔✔✔The E-step needs to be changed from stock estep to around 420. Do an Estep calibration to get exact estep that fits your printer.
• 【Dual Drive Technology】: It feeds the filament smoothly and uninterrupted, with no fear of grinding or slipping in most demanding conditions
• 【High Torque】: This dual-drive BMG Bowden extruder has a gearing ratio of 3: 1 which provides more torque than other extruders

MEEPOCAN

• ✔️New Double Gear Extrusion Mechanism. Had to change the extruder e-steps from 100 to 139
• ✔️UPGRADE: Perfect replacement for Creality 3D Printers CR-10/ CR-10S/ CR-10S Pro/ Ender 3/ Tornado, etc.
• ✔️All-metal aluminum alloy, High quality dual gear extrusion, stable and durable.
• ✔️For 1.75mm Filament. This Kit NOT include the stepper motor and instruction manual, we need to DIY :)
• ✔️Made by WINSINN, make sure the "WINSINN" label on the box for our after-sales service.

WINSINN

• ✔️This Kit NOT Include Motor and Instruction manual, we need to DIY :)
• ✔️This Bowden Extruder can replace MK8 Extruder
• ✔️Suitable For Remote and Short distance
• ✔️For 1.75mm Filament
• ✔️Made by WINSINN, make sure the "WINSINN" label on the box for our after-sales service.

WINSINN

• Used for 1.75mm/3mm filament Reprap, Makerbot, Prusa i3 3D printer
• Full aluminum alloy material, the surface is sandblasted and oxidized
• Nema 17 stepper motor is supported, the stepper motor is NOT included
• Complete 3D printer bowden extruder includes ball bearing,spring,screws ,remote connectors and 50 teeth driver gear(bore 5mm).Main extruder body needs assembly, easy to install ,please refer to picture 7
• IMPROVED VERSION, equipped with 2 pneumatic fittings, so it feeds more smoothly. You can make your extruder closer to the printhead (reducing brushed remote feeding problems arising from this can to some extent), while the supplies can be placed in a more appropriate position, and not worry about other issues stuck supplies

YOTINO

• Kit includes: 1pc Universal Geared Extruder, 1pc Screws package, 1pc Installation tools package, 1pc Stepper motor mounting bracket
• Upgraded High performance extruder for 3D Printer
• Upgrade Highlights: 1. The position of the gear and the accuracy of all screw holes are calibrated. 2. Modified the new buckle, both sides of the V2.0 version of the BMG extruder support filament running thru in and out (it has no specified direction, and you are able to use either side of the material ports)
• 3. The filament has an independent motion cabin inside the extruder. The new white filament guide inside the extruder is helping the filament running smoothly. 4. The new outer shell design with edge cut on the top of the extruder is reserved for the screw rod of Ender 3 printer. 5. Upgraded shell using new mixed materials
• ***Please make sure Gears are Installed and Precisely Aligned before printing, they will perform successfully

GO-3D PRINT

• Direct Drive Extruder:The upgrade extruder supports direct extrusion.A direct drive extruder improves extrusion and retraction by removing the need for the Bowden (PTFE) tube.
• Original Upgrade Replacement for Creality Ender 3 V2,Ender 3 Pro,Ender 3,CR-10,CR-10 S4, CR-10 S5, CR-10 Mini, CR-10S, CR-10 Plus.
• Bowden extrusion is supported:It comes with a nema stepper motor mount,works great on TEVO Tarantula i3,Anycubic Kossel i3 Mega,Flsun i3,MP Select and other bowden extrusion 3d printers as well.
• Recommend filament materials:PLA/ABS/Wood/TPU/PETG,40 Teeth drive gear feeds the 1.75mm filament very smoothy.
• The Ender 3 extruder is made of heavy-duty aluminum alloy material,which is more durable and stable than the plastic one.

Redrex

• Compatibility. This gray MK8 style metal extruder is an original upgraded replacement part for Ender 3, Ender 3 Pro, Ender 3 V2, Ender 3 Max, Ender 5, Ender 5 Plus, Ender 5 Pro, CR-10, CR-10 V2, CR-10 Max, CR-10 S4, CR 10, CR-10 S5, CR-10 Mini, CR-10S, CR-10 Plus, CR-X, CR 20, CR 20 Pro. It is also compatible with other 3D printers except the printers using a direct drive setup. No need to change stepper motors or other mounting hardware.
• Last Over Years. Made by high quality aluminum, last much longer your stock plastic or 3D printed extruder feeder drive.
• Work Better. It makes loading the filament easier and smoother, no worries about filament scraping or breaking.
• Fits 1.75mm filament. 40 Teeth drive gear compatible with PLA/ABS/Wood/TPU/PTEG.
• Easy to Install. This extruder DIY kit comes with an instruction of how to put it together, which makes it more easy to install.

Comgrow