10 Best Drill Press of March 2024

List of Top Rated Drill Press from thousands of customer reviews & feedback.

Updated On Mar 2024

1,510 Reviews Studied

By Customer Ratings

1
Image
WEN 4225 8.6-Amp Variable Speed Floor Standing Drill Press, 15-Inch Read Review

  • 4-inch stroke makes drilling through 4x4 boards easier than ever
  • Adjust the variable speed anywhere from 280 RPM to 3300 RPM
  • Includes a built-in work light, a precision laser, a 5/8 inch chuck, and onboard chuck key storage
  • 12-inch by 12-inch cast iron work table pivots up to 45 degrees in both directions
  • Backed by a 2-year warranty, a friendly customer service line and a nationwide network of skilled technicians

2
Image
WEN DPA2412T 24 in. x 12 in. Drill Press Table with an Adjustable Fence and Stop Block Read Review

  • Expand your workspace by 275 square inches (23-7/8 inch width, 11-7/8 inch depth)
  • Spacious table measures in at 23-7/8 x 11-7/8 x 1 inches
  • Fits any drill press table between 5 and 16 inches in width
  • Designed to fit the entire WEN Drill Press Series
  • Includes an adjustable fence, a sliding fence stop block, onboard rulers, and a two-year warranty

3
Image
Irwin Tools Drill Press Vise, 4", 226340 Read Review

  • Slotted base for easy installation and positioning
  • Textured jaws for secure gripping
  • 4.5 Inch jaw capacity perfect for light duty tasks
  • Lightweight and portable
  • Crated of forged iron for long-lasting durability

4
Image
WEN 4206 2.3-Amp 8-Inch 5-Speed Cast Iron Benchtop Drill Press Read Review

  • Features a 2.3A induction motor, an 8-inch swing, and a 2-inch spindle travel
  • Includes a 1/2-inch keyed chuck and onboard key storage
  • Operates at 5 different speeds: 750, 1100, 1500, 2100, or 3200 RPM
  • Sturdy cast iron head, table, and base for precise drilling operation
  • 6.5 by 6.5 inch height adjustable worktable bevels up to 45 degrees in each direction

5
Image
Hardware Factory Store 2 Way 4-Inch Drill Press X-Y Compound Vise Cross Slide Mill Read Review

  • Durable cast iron construction, Powerful serrated steel jaws
  • 4 Inch Wide Jaw, Cold rolled steel screws
  • 2 swivel crank handles for adjusting vise front to back and left to right, Bolt down slots for securing
  • Hinged vise crank handles drops out of the way, Designed for woodworking and metalworking
  • 3.5 Inch throat opening, 5 Inch longitudinal and 4.5 inch cross travel

6
Image
SKIL 3320-01 3.2 Amp 10-Inch Drill Press Read Review

  • 1/2-inch keyed chuck. Bump-off switch for added safety
  • 5 speeds - 570 - 3,050 RPM
  • Adjustable depth stop for accurate measurements and repetitive drilling
  • 0-45 degree left/right tilting work surface
  • Laser X2 2-beam laser for precise hole alignment

7
Image
WEN 4210T 10 In. Drill Press with Laser Read Review

  • Includes: drill press, class II 1mW laser, 1/2" keyed chuck & key, tools for assembly
  • Adjust between five speeds from 600 to 3100 RPM
  • Spindle travel of 2-1/2” with easy to read, locking linear depth stop for accurate and repeatable drilling operations
  • Durable 3.2-amp motor provides ample torque and power
  • 7-5/8 x 7-5/8" cast iron worktable features rack & pinion height adjustment and bevels up to 45 degrees left & right

8
Image
Milescraft 1318 Drillmate Drill Guide with chuck Read Review

  • Perfect for straight or angled drilling, drilling on the edge of a board or on round stock
  • Attaches to all 3/8" And 1/2" Power drills and it also includes a 3/8" Capacity chuck with key
  • Angle cuts of 45 Degree to 90 degrees, with a built in angle read out in the all metal base
  • Centering channels built into the bottom of the base, to accommodate drilling any round stock up to 3 inches in diameter
  • Adjustable depth stop and spring action control of the head

9
Image
WEN 4214 12-Inch Variable Speed Drill Press,Orange Read Review

  • Infinitely variable speed ranges from 580-3200 RPMS. Mechanical variable speed delivers equal torque throughout the range. LED read out displays speed.
  • Spindle Travel of 3-1/8" with easy to read, locking linear depth stop for accurate and repeatable drilling operations. Front to the back of the motor is 22 inches
  • Quill diameter of 2.17 inches. Durable 2/3hp induction motor develops ample torque and power. Motor: 120 V, 60 Hz. Laser Module: Class III
  • 9-1/2 x 9-1/2" cast iron worktable features rack & pinion height adjustment and bevels up to 45 Degree left & right. Width with the handles: 14-1/2"
  • Includes drill press, mechanical variable speed, laser, table roller extension, 5/8" keyed chuck & key, tools for assembly.Drill press Height from the Floor to the top: 37 inch

10
Image
WEN 4208 8 in. 5-Speed Drill Press Read Review

  • Includes a 1/2-inch keyed chuck and onboard key storage
  • Operates at 5 different speeds: 740, 1100, 1530, 2100, 3140 RPM
  • Spindle travels up to 2 inches with easy to read, locking linear depth stops for accurate and repeatable drilling operations.Cord Length (ft.):6
  • Durable 1/3 HP induction motor develops ample torque and power
  • 6-1/2 x 6-1/2" worktable is height adjustable and bevels up to 45 degrees left & right
  • Swing: 8 inch. Motor: 120V, 60Hz. Horsepower: 1/3 HP.