10 Best Drill Press For Metal of December 2025

• Durable cast iron construction, Powerful serrated steel jaws
• 5 Inch Wide Jaw, Cold rolled steel screws
• 2 swivel crank handles for adjusting vise front to back and left to right, Bolt down slots for securing
• Hinged vise crank handles drops out of the way, Designed for woodworking and metalworking
• This 5" cross sliding vise will easily turn your drill press into a milling machine. Easily machine wood and metal parts with high precision and quality utilizing this vise and it's precise moving slides. Can also be attached to a lathe or other tools as
  KEY POINT:
  Premium quality swiveling Milling Vises features perfectly aligned precision gowned jaws
  3 Inch Wide Jaw
  Trust your best work with these quality milling vises
  Made from the highest quality ductile Iron 80000 PSI for mi

nobrand

• 1/2-inch keyed chuck. Bump-off switch for added safety
• 5 speeds - 570 - 3,050 RPM
• Adjustable depth stop for accurate measurements and repetitive drilling
• 0-45 degree left/right tilting work surface
• Laser X2 2-beam laser for precise hole alignment

Skil

• Premium quality swiveling Milling Vises features perfectly aligned precision gowned jaws
• 3 Inch Wide Jaw
• Trust your best work with these quality milling vises
• Made from the highest quality ductile Iron 80000 PSI for minimum bending
• Longitudinal/Cross Travel and adjustable gibs

Hardware Factory Store

• Includes: drill press, class II 1mW laser, 1/2" keyed chuck & key, tools for assembly
• Adjust between five speeds from 600 to 3100 RPM
• Spindle travel of 2-1/2” with easy to read, locking linear depth stop for accurate and repeatable drilling operations
• Durable 3.2-amp motor provides ample torque and power
• 7-5/8 x 7-5/8" cast iron worktable features rack & pinion height adjustment and bevels up to 45 degrees left & right

WEN

• Motor size: 1 HP, 1,720 RPM
• Switch: Toggle type
• Spindle travel: 3-1/4-inch
• Accepts 5/8-inch drill chuck
• Built-in 110V light socket

Shop Fox

• Motor: 3/4 HP, 110-Volt, 1,725 RPM, Spindle Speeds 250-3050 RPM
• Drill chuck: 5/8-Inch
• Spindle travel: 3-1/4-Inch
• Swing: 13-1/4-Inch
• Includes a 3-piece spindle sander drum kit with a mandrel and 80 grit sanding paper to fit the 1-Inch, 1-1/2-Inch and 2-Inch drums.

Shop Fox

• Infinitely variable speed ranges from 580-3200 RPMS. Mechanical variable speed delivers equal torque throughout the range. LED read out displays speed.
• Spindle Travel of 3-1/8" with easy to read, locking linear depth stop for accurate and repeatable drilling operations. Front to the back of the motor is 22 inches
• Quill diameter of 2.17 inches. Durable 2/3hp induction motor develops ample torque and power. Motor: 120 V, 60 Hz. Laser Module: Class III
• 9-1/2 x 9-1/2" cast iron worktable features rack & pinion height adjustment and bevels up to 45 Degree left & right. Width with the handles: 14-1/2"
• Includes drill press, mechanical variable speed, laser, table roller extension, 5/8" keyed chuck & key, tools for assembly.Drill press Height from the Floor to the top: 37 inch

WEN

• Perfect for straight or angled drilling, drilling on the edge of a board or on round stock
• Attaches to all 3/8" And 1/2" Power drills and it also includes a 3/8" Capacity chuck with key
• Angle cuts of 45 Degree to 90 degrees, with a built in angle read out in the all metal base
• Centering channels built into the bottom of the base, to accommodate drilling any round stock up to 3 inches in diameter
• Adjustable depth stop and spring action control of the head

Milescraft

• ★ Drill press stand with cast iron vise.
• ★Copper plug readjustment to confirm the precision and durable. Precise graduation, transparent pointer, spacing function.
• ★Clamping range:(original) 44mm,( after adjusted) from 27.5mm to 43.6mm, there are 5 adapter sleeves that easy to fix the electric drill or grinder.
• ★0~90 Degree rotable to drill slant hole.Working stroke: 60mm, Down stroke: 60 mm
• ★Cast Iron Bottom Bracket,not aluminum.And it is 4 clamping points - to securely hold work piece

AMYAMY

• Includes a 1/2-inch keyed chuck and onboard key storage
• Operates at 5 different speeds: 740, 1100, 1530, 2100, 3140 RPM
• Spindle travels up to 2 inches with easy to read, locking linear depth stops for accurate and repeatable drilling operations.Cord Length (ft.):6
• Durable 1/3 HP induction motor develops ample torque and power
• 6-1/2 x 6-1/2" worktable is height adjustable and bevels up to 45 degrees left & right
• Swing: 8 inch. Motor: 120V, 60Hz. Horsepower: 1/3 HP.

WEN