10 Best Automotive Oscilloscope of September 2025

• 2.4MSa/s, 12bits;
• DAQ card function;
• Cost-effective 8 channels oscilloscope for vehicle testing;
• 8 channels programmable generator which can analog signals of crankshaft, camshaft etc.

Hantek1008C

• 8 channels oscilloscope, 2.4MSa/s real time sampling rate
• 12 bits vertical resolution, spectrum analysis function
• Bus Diagnosis: CAN bus data examine, CAN bus signal integrity, CAN bus LH long time acquisition, LIN bus
• Sensor: Air Flow Meter, Camshaft, Crankshaft, Distributor, Lambda sensor, Throttle position
• More than 20 types of automatic testing function, a similar interface with bench top oscilloscope, easy to use

Mrcartool

• Multiple Purpose: The mini oscilloscope can automatically measure parameters such us voltage, frequency and pulse width.
• Powerful Performance: The oscilloscope analog bandwidth is upgraded to 15MHz, and max sample rate to 100MSa/s. It has 4 Channels, including 2 analog channels and 2 digital channels.
• Multiple trigger modes: Ascend/Descend Edge Trigger, Positive/Negative Pulse Trigger, and Logic Trigger.
• Color Display: The oscilloscope can display the measured AC current in color, including sine, square, sawtooth, and triangle waveforms, making it easy to read.
• Portable: Mini size, light weight and handheld. CE/FCC Certifications. For Tutorial of DS213 You can visit https://youtu.be/anLF1Rd6b6A

Cheffort

• It continues the compact and lightweight concept but with a new generation of 4 in 1 multifunction tester: Automotive Diagnostic, oscilloscope, signal source and multimeter;
• A small volume of the non-profit grip by a single hand; The suspendingstand was designed to support multi-angle adjustment;
• Ultra-low-power, Type C charging interface, each 2 hours battery charge allow working one full day or standbytwo months;
• High-definition color LCD screen display clear and delicate; Minimalist keyboard design simplifyoperation, easy to use.
• The product is 100% brand new and high-quality. We care for every customer’s feeling. You can get in touch with customer service when you meet any question.

Hantek

• Intelligent anti-burn, 1 times withstand voltage up to 400V. Built-in 6000mAh high-performance lithium battery, can be used continuously for 4 hours after fully charged.(Note：Before use, please read the manual attached to the product. If you have any questions, you can contact us. )
• Fully matched 7-inch TFT LCD color display with a resolution of 800 * 480, bright colors and high contrast. The capacitive touch panel is similar to the touch mode of modern tablet computers.
• Equipped with efficient one-button automatic device. One-click waveform saving and screenshots. The built-in 1GB storage space can store up to 1000 screenshots 1000 sets of waveform data. The powerful waveform image Manager supports browsing, viewing, viewing detailed information, turning pages, deleting and zooming, zooming and navigating waveforms.
• High measurement voltage range, 1X can measure 0-40V, 10X can measure 0-400V, 100X can measure 0-4000V. Up to 12 parameter measurements: VPP, VP, Vmax, Vmin, Vavg, Vrms, Frequent, Duty , Duty-, Time , Time-, Period. This USB oscilloscope is equipped with a USB interface and can be connected to a computer to share its screenshots with the computer, which facilitates secondary analysis.
• Memory compression technology, waveform refresh screen does not flicker;Powerful waveform picture manager supports thumbnail browsing, viewing, detailed viewing, page turning, deletion and waveform zooming in, zooming out, moving, etc;FFT display function, can analyze the spectral characteristics of the signal.

Aiteme

• 8 Channels oscilloscope for vehicle testing. Over 80 types of automotive diagnostic function (Ignition/Sensor/Bus detection/Performe/Starter and charging circuits etc.)
• Video Help Function, provides the video help of diagnostic which can be watching online.
• The diagnostic result can be generated diagnostic report., printed or taken screenshot by pushing one key, many methods to save the data.
• Supported to record waveform for a long time. It can simulate camshaft and crankshaft signal. Support Windows 7, Windows 8, Windows 10.
• Transmit signals through USB 2.0 interface plug and play, and no need extra power supply. Package comes with storage case, lightweight and portable.

Hantek

• Cost-effective 8 channels oscilloscope for vehicle testing;
• 2.4MSa/s, 12bits;
• DAQ card function;
• 8 channels programmable generator which can analog signals of crankshaft, camshaft etc

Hantek1008B

Graham Stoakes

• EXTENSIVE COVERAGE: With Free MV108, Autel MaxiScope MP408 measures and tests virtually all the electrical and electronic components and circuits in most modern vehicles. In addition, it can be used in a wide range of industries related with electronic signals.
• 4-CHANNEL PANEL: This advanced automotive oscilloscope features color coded 4-channel control panel for fast sampling, making it a complete electronics lab in one compact, low-cost, USB-powered unit.
• READ & DISPLAY: Featuring one-click auto setup of the voltage scale and time base, Autel MP408 is compatible with LIN, CAN and FlexRay data bus standards to read and display electrical signals in high resolution waveforms.
• INTUITIVE UI DESIGN: It features easy trigger point adjustment and real time scale info display that ensures you can effortlessly capture every detail of the signal. Also, it allows manual editing of measurement parameter display.
• VERSATILE & PORTABLE: Power for the MaxiScope MP408 comes directly from the USB port of the connected PC, so no batteries or power leads are required, making the system very versatile and portable to use.

Autel

• Features one-click auto setup of voltage scale and time base
• Reads and displays electrical signals in high resolution waveforms
• Records and plays back waveform data
• Free online software update through the Internet
• Features color coded 4-channel control panel

Autel