10 Best Oscilloscope For Audio of September 2025

• 𝐂𝐨𝐬𝐭 𝐄𝐟𝐟𝐞𝐜𝐭𝐢𝐯𝐞 : 100 MHz analog bandwidth,Real-time sampling rate up to 500MSa / s and the price is moderate.
• 𝐇𝐃 𝐒𝐜𝐫𝐞𝐞𝐧 : 2.4'' color TFT- LCD display with 320 x 240 resolution.
• 𝐏𝐨𝐫𝐭𝐚𝐛𝐥𝐞 : Ultra small form factor easy to hand-held and carry. it's always ready when you need it.
• 𝐎𝐧𝐞 𝐊𝐞𝐲 𝐒𝐚𝐯𝐢𝐧𝐠 : The built-in 64 MB flash storage for up to 2000 waveform images.The storage process is easy and fast.
• 𝐄𝐚𝐬𝐢𝐥𝐲 𝐌𝐞𝐚𝐬𝐮𝐫𝐢𝐧𝐠 : Auto/Normal/Single 3 Trigger modes,it is easy to capture instantaneous waveform.

YEAPOOK

• ☑【High-Quality Materials】Made of high-quality materials, it is durable, wear-resistant and can be used for a long time. Using as sine wave oscillator. Measurement of amplifier gain.
• ☑【High Stability & Accuracy】Reliable circuitry insure high stability and accuracy. Sine wave and square waves is available. Synchronizing input terminal.
• ☑【Sine Wave Characteristics】The signal generator has the characteristics of a sine wave and an effective frequency response. Low distortion factor can be obtained for measurement of distortion characteristic of amplifier.
• ☑【Frequency Range 10HZ-1MHZ】The frequency range from 10Hz to 1MHz selectable in 5 ranges are calibrated with single-scale graduations.
• ☑【Vertical Type Panel Assembling】The vertical panel integration ensures the ease of use of the device and makes the operation simpler and more convenient. Easy operation on vertical type panel assembling.

TBVECHI

• With Automatic mode, conventional mode and single trigger mode. Included 10:1 BNC probe and use 9V DC power charger (not include), Convenient to capture the instantaneous waveform. With secondary development on the basis, can be changed to voltmeter, data loggers. 2.4-inch color TFT display
• Waveform parameter digital display include: Frequency, period, pulse width, duty ratio, MAX./MIN./AVG./Peak-Peak/virtual values and effective value; Adopts ARM Cortex-M3 processor (STM32F103C8)
• Rising or falling edge trigger are available, also the trigger level position and vertical displacement are adjustable. Short-circuit and open-circuit detection to find out the soldering error
• Observable the previous waveform before trigger (negative delay). Freeze waveform display at any time (HOLD function). Come with instructions, easy to install and operate
• Waveform storage function: Waveform will not lose when save/tune out the waveform/shutdown waveform. Test signal source with 1KHz /3.3V square wave

wisTeck

• UPGRADED VERSION - The sensitivity of Q15001 has been extended in both directions and is higher and wider. It reaches 5mV/div - 20V/div. Also, this updated version can be handheld.
• DESIGNING TO YOUR NEEDS - Display and MCU are mounted on the same board (mainboard) to avoid using inter-board pin-headers. Analog channel is placed on a separate board that contains most user install parts, so the analog and digital circuits can be better separated.
• ROTARY ENCODER - It has been added the rotary encoder, makes parameter adjustment quicker and easier.
• ASSEMBLED FINISHED - Quimat Q15001 oscilloscope is an Assembled finished Machine. NOT DIY PART, it can be used directly to avoid assembling welding process problems and greatly saves the assembly time.
• WHAT YOU GET - You will get an assembled oscilloscope, BNC-clip cable and a power pupply. Detailed Operation instructions troubleshooting guide and schematic are also provided.

Quimat

• Power supplied by 1 piece 3.7V Lithium battery.(Battery included in the equipment)
• It uses a high speed AD sampler to convert the input analog signal into digital signal and displays the signal on a 128 x 64 LCD after processing the signal through a high-speed CPU.
• It uses a high speed comparator to get a good edge trigger for a steady display, which is good for observation.
• Its mustimeter part uses a dedicated, 6000-count chip, which can provide a higher precision.
• Portable size but come with great and multi-function.

ALLOSUN

• 200 mhz bandwidth
• Real-time sampling rate up to 1 gsa/use
• IRecord length up to 14 Mpts
• Standard serial bus triggering and decode, supports iic, spi, uart, Rs232, can, and lin
• 1M points fft

Siglent Technologies

• Includes everything you need to build your very own oscilloscope! A clip probe, plastic enclosure, and full product documentation are included
• DSO150 (15001K) kit is an upgrade to the popular DSO138 scope kit. Contains a 2.4" color TFT LCD (320x240) display and optical encoder for navigation
• We strive to send the most current revision available. The current PCB version shipping for this listing is revision 'E', which has a variety of enhancements over previous versions. For more information on product changes, please visit the product page on NooElec's or JYETech's website
• Counterfeit versions of this product are available from other Amazon sellers. NooElec is an authorized distributor of JYETech products, which can be verified through their website or your device serial number. Warranty and support service through JYETech is included in your purchase
• 24/7 support service. We speak your language! Please contact our support team if you have any questions about your product, technical or otherwise

NooElec

• An assembled kit, just get it and use it.
• Designed as a training oscilloscope with simple, reliable and inexpensive circuit.
• With automatic, regular and one-shot mode, easy to capture the moment waveform.
• Partially open-sourced, the MCU has been programmed.
• Adjustable vertical displacement, and with instructions, which increase the likelihood of adding different features or developing new applications on the hardware for users.

Quimat

• 𝐂𝐨𝐬𝐭 𝐄𝐟𝐟𝐞𝐜𝐭𝐢𝐯𝐞 :ADS2050H: 5MHz analog bandwidth @ 20MS/s sampling rate / ADS2031H: 30MHz analog bandwidth @ 200MS/s sampling rate,and the price is moderate
• 𝐇𝐃 𝐒𝐜𝐫𝐞𝐞𝐧 : 2.4'' color TN- LCD display with 320 x 240 resolution.
• 𝐏𝐨𝐫𝐭𝐚𝐛𝐥𝐞 : Ultra small form factor easy to hand-held and carry. it's always ready when you need it.
• 𝐎𝐧𝐞 𝐊𝐞𝐲 𝐒𝐚𝐯𝐢𝐧𝐠 : The built-in 16 MB flash storage for up to 500 waveform images.The storage process is easy and fast.
• 𝐄𝐚𝐬𝐢𝐥𝐲 𝐌𝐞𝐚𝐬𝐮𝐫𝐢𝐧𝐠 : Auto/Normal/Single 3 Trigger modes,it is easy to capture instantaneous waveform.

YEAPOOK

• ▼FASTER SAMPLING SPEED -
  200K SPShigh-seed A/D data collecting, high sampling rate and high bandwidth, one-key transform to waveform function furing measuring.Improve work efficiency.
• ▼MORE POWERFUL DETECTION RANGE -
  DC voltage 0 ~ 1000V, AC voltage 0 ~ 750V, DC/AC Current 0 ~ 20A, Resistance 0 ~ 20MΩ, Capacitance 0 ~ 20μf, Frequency 0 ~ 200KHZ, Diode / Continuity Test, Remote control test, Transistor amplification test to meet all test requirements.
• ▼MORE ACCURACY -
  Dedicated Chip, the automatic waveform capture function, easy operation. The software calibration technology, memory calibration coefficients. Measure more accurately.
• ▼LED BACKLIGHT & STORAGE / READOUT -
  Analog broadband range up to: D AC ~ 10kHz, Display hold, storage / readout up to 5 waveforms and 100 sets of measurement values. 128X64 high contrast LCD with LED backlighting. Suitable for working at night.
• ▼FUSE PROTECTION & MULTI-PURPOSE -
  Built-in 500V/20A explosion proof fuse, 20A AC and DC test. Can choose to automatically shutdown or continuous operation, applicable to the workplace such as family, school, and factory. DISTORTION DETECTION ALSO Protect safety.

LIUMY