10 Best 3d Printer Extruder of December 2025

• Assembled mk8 extruder come with 4 print nozzles; Diameter: 0.4mm defaulted; 0.2mm, 0.3mm, 0.5mm optional.
• It is compatible with most prusa i3 3d printers with some slight modifications when mounting it.
• Filament size: 1.75mm PLA/ABS or other 3d print materials. Flow rate of nozzle:max 100mm/s, support for high speed printing.
• Nema 17 high quality stepper motor with larger torque and less heat buildup.
• Special ceramic insulation cotton ensure the hotend can heat to a high temperature fast and stably.

MYSWEETY

• Full Color Touch Screen: with no threshold,which is more friendly and easier operation
• Dual Extruder: allows you print the object in two color and print the dissolvable filament for printing support material
• Filament detection: if the filament spool runs out during printing, the machine automatically pauses for you to load in a fresh spool, very useful for big volume object printing
• WIFI Control: the included networking feature permits you to control the print via a phone or PC
• Copy printing: dual extruders can print two same objects at one time, cut your printing time at least in HALF

BIBO

• 【Independent Dual Extruder Design】Our TL-D3 Pro dual extruder 3D printer has dual nozzles independent of each other, so you can print in dual material/duplication/mirror mode. With dual material printing mode, you can get two color models. Choose duplication or mirror mode, you can get two models of the same color or different colors.
• 【Upgrade Borosilicate Glass Bed】TENLOG upgrade borosilicate glass bed enable prints adhere better without the warping.ultra smoothness even on the first layer,the model can be Pick up by hand after cooling.
• 【Self-developed Silent Motherboard 】The TL-D3 Pro built-in self-developed silent motherboard tmc2209 driver, which has stronger anti-interference, faster and more stable motion performance, silent printing and low decibel operation.
• 【Easy to Assemble】It comes with several assembled parts. You can assemble the 3D printer in 3 steps, with its user manual, in about 5 minutes.
• 【Metal scraper】 when using dual-material mode, the metal scraper is afraid that it will wipe the remaining filament on the nozzle, so there is no need to use a Enable Ooze Shield and a Enable Prime Tower to print the dual-color mode.

TENLOG

• 【Function】The extruder is designed for 1.75 mm wearing parts, and the fastening spring device allows the user to fine-tune the pressure exerted by the dual-drive gear on the wearing parts
• 【Use】For all metal extruder is suitable for various nylon and TPU/TPE soft materials
• 【Feed power】This 3D printer extruder adopts a unique double-page paper feed mode, the gear can be minimized, slippage and increase paper feed power
• 【Good performance】The reduction gear device can also provide greater torque for extrusion, while reducing the burden on the motor and extending the life of the motor. 1.75 mm wearing parts The unique dual feed gear can minimize slippage and increase the feed power
• 【Adjustability】Users can freely adjust the tightness according to the characteristics of consumables

Fafeicy

Wiley

• UPGRADE: Right hand extruder kit - Perfect replacement for Creality 3D Printers ENDER3, ENDER5, CR-10 Series, CR-10 S4, CR-10 S5, CR-10 Mini, CR-10S, CR-10 Plus. Upgrade your Creality 3D Printer Extruder with our New "Metal Anodised Aluminum" Upgrade Kit.
• STABLE and DURABLE: Full metal aluminum alloy, DIY kit and you need to assemble by yourself. Our MK8 extruder hotend include all the necessary screws & parts needed to directly replace your old original weak Creality plastic extruder.
• EASY TO INSTALL: All you do is unbolt the old original Creality plastic extruder & screw in the new "Metal Extruder" and ready to start printing. Used for 1.75mm filament of 3D printer MK8 bowden extruder frame.
• ADVANTAGES: The advantages of our extruder drive is you have better stronger pressure pushing the filament into the printer nozzle and so will improve on the printers’ performance. Our extruder kits have an adjustable bolt so that you can adjust the pressure of the extruder gear as needed.
• Trusted Vendor: CHPOWER is a TRUSTED VENDOR. Buy with confidence.

CHPOWER

• ✔️New Double Gear Extrusion Mechanism. Had to change the extruder e-steps from 100 to 139
• ✔️UPGRADE: Perfect replacement for Creality 3D Printers CR-10/ CR-10S/ CR-10S Pro/ Ender 3/ Tornado, etc.
• ✔️All-metal aluminum alloy, High quality dual gear extrusion, stable and durable.
• ✔️For 1.75mm Filament. This Kit NOT include the stepper motor and instruction manual, we need to DIY :)
• ✔️Made by WINSINN, make sure the "WINSINN" label on the box for our after-sales service.

WINSINN

• Premium Quality--MK8 nozzles are made of high quality brass material.Heavy duty and provide a long service life.Easy to install and change.
• Precise Design--3d printer nozzles can prevent print head from leakage effectively and produce consistent prints with smooth and glossy polish.Reduce the resistance from the corners and avoid blocking of the filament with rounded chamfer.Easy to identify with engraving the size on each nozzle.
• Applicability and Compatibility--MK8 extruder nozzles fit for 3D Printer Makerbot Creality CR-10, MK8 Makerbot Reprap Prusa I3, compatible with all 1.75mm PLA ABS 3D printer. Fit exactly like the original.
• Package Include--Printer nozzles come with 24 pieces MK8 nozzles in 7 sizes(quantity x output diameter): 2 x 0.2mm, 2 x 0.3mm, 12 x 0.4mm, 2 x 0.5mm, 2 x 0.6mm, 2 x 0.8mm, 2 x 1.0mm,with a plastic box for storage.
• Parameter--Input diameter 1.75mm; output diameter 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm; Screw thread: M6;Hexagon diameter: 6 mm

LUTER

• ❤【UPGRADE DAUL GEARS】Double-gear and double-pneumatic joint extrusion structure, high extrusion force, enhancing the feed strength , ensuring smooth feeding, better pressure pushes the filament into the printer, not easy to lose steps.
• ❤【COMPATIBILITY】Perfect replacement for 3D Printers CR-10/ CR-10S/ CR-10S Pro/ Ender 3/Ender 3 pro/Ender 5/Tornado, etc. For 1.75mm filament.
• ❤【STABLE AND DURABLE】All-metal aluminum alloy, High quality dual gear extrusion, Compare to the normal plastic drive, this high aluminum metal dual gear extruder is stable and durable.
• ❤【IMPORTED MATERIAL】The product material adopts brand-new imported aviation aluminum material, and is processed by CNC imported from Japan. DIY：You can simply install it by yourself.
• ❤【24 months Longer warranty 】We will provide a long-term warranty service of up to 24 months. We will respond promptly within 12 hours in one business day. We provide product exchange, resend and refund services. Octobigtree is committed to customer satisfaction.

N-O