10 Best I3 Mega S 3d Printer of January 2026

• Package Include: 1 set V5 hotend kit(0.5 meter PTFE tube, 12V 40W heater, 100K NTC B 3950 ±1% thermistor, bore 4.1mm throat, V6 PC4-01 pneumatic connector, V6 brass nozzle, V5 heater block), extra 3 x V6 brass nozzles, 2 x V5 heatblock silicone socks, 1 x aluminum V5 heater block.
• Suitable 3D Printer: 12V 40W J-head hotend applicable for Anycubic I3 Mega, I3 Mega X, Mega S.
• Advantages: Smooth feeding without leakage, 45-degree chamfering design at the threaded mouth of the rear end, smooth feeding, flat and smooth cross-section of the shut-off, and a high degree of closeness to the docking fitting.
• Features: The throat is made of newly designed stainless steel, which can simultaneously achieve lower thermal conductivity to reduce the heat loss of the heated aluminum block, while transferring its own heat to the radiator more quickly, greatly ensuring the stability of the product and eliminating the phenomenon of plugging under normal use.
• Strong Point: Upgrade the middle part of the heat pipe tapping and top wire fixed, easy to install, easy to remove, large volume, fast heat dissipation.

SAPLUSREPRAP

• Material: brass
• Installation: external M6 thread connection
• Diameter: input: 1.75mm, output: 0.4mm
• Compatible: all 1.75mm PLA abs printer
• Quantity: 20 pcs 0.4mm M6 3D Printer nozzles

EXCELFU

• Free of Assembly, with velcro bonding, can be assembled without any tools. Foldable and hand-held, make the 3d printer cover easy to move. and 5 surfaces design, can cover directly from the top of the 3d printer without machine moving
• Safe to Use, the interior uses high-quality aluminum foil material, which have good flame-retardant and heat-insulating characteristics. If get a fire inside, the 3d printer enclosure will not fire and not spread. The external materials are waterproof, dust-proof and windproof to avoid some random accidentals damage to the printer
• Constant Temperature, keep a constant temperature printing environment, reduce the bad effects of low temperature weather on the 3D printer, ensure the stability of the machine, and improve the quality of 3D printing works
• Product Size, the 3D printer tent with a popular size 21.65'' x 21.65'' x 21.65'', fit to ANYCUBIC Mega s/pro/i3, as well as the same size machine of other brands
• More Excellent Detail, tool pockets and wire holes provide more convenient functions when printing, visual anti-laser window, observe the effect of laser engraving while protecting your eyes

ANYCUBIC

• Hotend for Anycubic i3 mega
• 0.4mm nozzle for 1.75 filament
• 12V 40W heater
• V5 Radiator tube
• V6 PC4-01 quick connector

ANYCUBIC

• Size: 220mm x 220mm x 3mm
• Made of tempered glass, and temperature resistance up to 250°C
• The edges have been polished so it won't hurt hands or fingers
• Suitable for ANET A8 / A6, Tevo Tarantula, Anycubic i3 Mega and other 3D printer with printing area not more than 215*215mm, not suitable for creality ender 3 whose printing size is 220x220mm
• Very good flatness, with tolerance not more than 0.2mm

ReliaBot

• Dual-drive Bowden extruder has an internal transmission ratio of 3: 1 and high accuracy, and we recommend E-steps:385
• Adjustable Tension: The thumbscrew tensioner allows the user to fine-tune the pressure exerted by the drive gears onto the filament
• Notification: Do not adjust tension of hand twist screw too tight when you print soft filament, otherwise the filament wiring will be winding on the wheel. Manually adjust to a suitable tension for your 3D printer
• Suitable for most 3D printers and filaments
• Packing with: 1x Bowden Extruder, 1 x Universal Stepper Motor Bracket

Iverntech

• Nozzle size: 0.4mm, M6 thread for 1.75mm filament use
• The nozzle material is brass to keep good thermal conductivity, the Nickel coating can increase the lifetime of the nozzle and prevent the nozzle surface Oxidation
• Nickel plating has High hardness and wear resistance, Apply Nickel plating on the nozzle surface can reduce the friction, to make it smoother when inputing filament
• Compatible with V6 V5 hotend, Ultimaker 2+ olsson block hotend, Prusa i3 Mk3 mk3s Anycubic I3 Mega 3D Printer
• Package: 4pcs 0.4mm nozzles

POLISI3D

• 【Original Replacement Hotend】:The V5 J-Head Hotend is compatible with ANYCUBIC I3 MEGA, I3 MEGA X, Mega S 3D printer.
• 【Easy to Install】:Both of the thermistor and heating rod comes with connector,and the hotend is very easy to install.
• 【Pre-assembled Hotend】:Heat-resistant with aluminum heating block, the temperature can reach up to 250℃, equipped with NTC3950 thermistors and 12V 40W cartridge heater.
• 【Filament Compatibility】: The metal 12V 40W hotend works great with 1.75mm PLA/ABS/WOOD/PETG/TPU.
• 【Brass Nozzle】:0.4mm

UniTak3D

• 3D Printer replace or DIY accessories, Extruder Transfer Adapter Plate for Mega i3 Mega S etc 3D printer part.
• Simple, high-quality, smart and high-precision.
• High quality and brand new.
• Easy to install.
• Package included: Extruder Transfer Adapter Plate *2

FYSETC

• WORKS OUT OF THE BOX: 3 steps to set up ANYCUBIC Mega S 3D printer with 8 screws and 3 cables for minutes, not only meets fast assembly needs for expert users but also friendly use to beginners. Printing volume reaches 8.27 x 8.27 x 8.07 inches.
• UPGRADED EXTRUDER DESIGN: Titan extruder provides precise extrusion for your 3D printing with solid filament drive and overall mechanical design compatible with most filaments, greatly reducing the clogging risk and improving printing accuracy. Works with 1.75mm 3D Printer Filament such as TPU, PLA, ABS, HIPS, WOOD, etc.
• RESUME PRINT & SENSOR DETECTION: Mega S 3D Printer can resume printing after power outage or any other unexpected stoppage.One click to resume from the last recorded position when suffering power outages. And the sensor pauses prints and sets off an alarm when you run out of filament which greatly saves time and cost , printing volume reaches 8.27 x 8.27 x 8.07 inches.
• ANYCUBIC ULTRABASE: Patented 3D printer printing platform surface coated with patented microporous coating, with excellent adhesion when printing and then effortlessly falls off the bed when it cools to room temp at the end of the print.
• MORE FUNCTION: ①ANYCUBIC MEGA S is an all-in-one frame 3D printer. The rigid metal frame can minimize the shaking to improve the print quality; ②The double-rod motor is more durable than the traditional clutch motor, does not lose steps, has high precision and more model details can be restored; ③TFT Touch Screen-As responsive as operating on the phone

ANYCUBIC