10 Best 140mm Fans of December 2025

• 1 Features standard 140mm mounting holes :  140mm fan is a best replacement for common 140mm case fans and perfect fitment on 140mm water cooling radiators. It provides high cooling efficiency.
• 2 Hydraulic Bearing with Low-Noise Design：The hydraulic bearing with high quality. making aigo fan spin at 1000RPM at low 25dBA and deliver an air flow of up to 49.8CFM
• 3 Anti-vibration Mounting System:  The fans come with eight pre-installed rubber anti-vibration pads reduce vibration between fan and PC case. Ultra-Silent Case Fan that Keeps Noise Level Down to 29dBA
• 4 Innovative Design Enabkes Quiet And Efficient: The innovative design of the fan blades improves the air flow and facilitates a highly efficient ventilation.
• 5 New concept of fan design. Unique appearance 2018 newest release 140mm case fan

upHere

• Package included: Individually adressable RGB Case Fan 140mm x 1
• Convex designed dual addressable RGB ring offered best lighting effect: convex design kept RGB lighting effect at a optimal point and left tolerance for other RGB components such as, mobo / ram / gpu, water cooling components, and SSD plate.
• 16.8 Million Colors & 18 Independent Controlled LEDs: With dual ring, total 18 separately controlled RGB LEDs smoothed out the overall RGB effect and leaves no gaps between LEDs.
• Synchronizable RGB lighting via motherboard: Sync ready with all mobo houses including Gigabytes(only except Gigabytes z390), Asus and MSI; Prizm only supports 3 pin RGB header.
• Extreme Cooling Performance - 65.03 CFM & 1.64 mm: PWM Fan optimized heat dissipation and hydraulic bearing ensured ultra quiet operation.

Antec

• PERFORMANCE ENGINEERED: These PWM static pressure fans are designed with a chamfered-intake and exhaust that boost overall airflow and pressure
• UNIQUELY SHAPED: Custom engineered light guide creates stunning visual effects, with uniform light dispersion
• WINGLET TIPS: Winglet designed fan blades minimize drag and further enhance fan performance
• FLUID DYNAMIC BEARING: Using patented fluid dynamic bearings(FDB) made of copper, FDB are designed to maintain consistent lubrication reducing bearing noise
• DISCLAIMER: RGB Fan & Controller required. Sold Separately

NZXT

• Dual fan kit with four lighting zones and 34 individually addressable RGB LEDs per fan radiate spellbinding colors and effects on either side.
• Brilliant white fan housing reflects light for brighter lighting and matches the clean, refined look of other white CORSAIR products in your setup.
• Use the included compact iCUE Lighting Node CORE to easily control RGB lighting via CORSAIR iCUE software, cutting down cable clutter with simple USB 2.0 and SATA connections.
• Create mesmerizing animated lighting effects with powerful CORSAIR iCUE software, bringing your system to life with dynamic RGB lighting synchronized across all your iCUE-compatible products and immersive integrated lighting with compatible games.
• Keep your system cool with powerful fan speeds up to 1,250 RPM, pushing up to 50.2 CFM of air.

Corsair

• Great performance-to-noise ratio with 28.1Db(a) at 1, 600Rpm. Air flow - 77.57 CFM. Noise level - 28.1 decibels
• 6-Pole fan motor for less power consumption and vibration
• Fluid-dynamic bearing enables super-long life span of 300, 000 hours
• Fan frame with funnel-shaped air inlets for extremely high air pressure
• Seven fan blades provide optimized airflow
• Pwm controlled fan speed by the motherboard

be quiet!

• Magnetic Bearing: harnesses magnetic levitation technology to provide lower noise, higher performance, and a longer lifespan. Air flow - 97 CFM. Noise level - 37 decibels
• Custom Rotor Design: delivers the perfect balance between high static pressure and high airflow, operating flawlessly in the most challenging environment
• Extensive Control Range: A 1,600 RPM control range gives you total control between silence and absolute performance

Corsair

• GREATER EFFICIENCY - LESS NOISE AT HIGHER AIRFLOW: At low fan speed, the motor noise is key, a motor developed in Germany with a new alloy/lubricant combination reduced friction and noise
• INNOVATIVE DESIGN: Design of fan blades improves air flow and facilitates efficient ventilation, impeller was designed with a focus on minimzing the noise level yet delivering the desired airflow and pressure
• TWO WAY INSTALLATION: Blow warm air out of the case, draw cool air into your case
• LONG SERVICE LIFE: The Fluid Dynamic Bearing comes with an oil capsule that avoids lubricant leakage, thus this bearing is as quiet as a sleeve bearing but comes with a higher service life
• TECHNICAL DATA: Fan speed: 800 RPM, Airflow: 46 CFM/78 m³/h (@ 800 RPM), Noise Level: 0.08 Sone (@ 800 RPM), Pin: 3-pin

ARCTIC

• 16 independent RGB LEDs in every fan, split between two separate light loops.. Air flow - 51.5 CFM. Noise level - 25.0 decibels
• Software control and customize RGB lighting effects with the included Corsair lighting
• PWM fan control allows for dynamic speed adjustment between 600 rpm to 1, 300 rpm, minimizing noise or maximizing airflow.Power Draw:0.3 A
• 140mm fan Blade engineered for Low-Noise operation without sacrificing performance.
• Sound level is 25 dBA

Corsair

• Synchronized your gaming station - Control fan lighting with select 5V addressable RGB motherboards. Supported motherboard software includes as US aura Sync, Gigabyte RGB FUSION, MSI Mystic Light Sync, and ASROCK polychrome.. Air flow - 56.45 CFM. Noise level - 30.4 decibels
• Analog ARGB controller - low-profile controller included for users without RGB Cable motherboards. Choose from 8 Preset colors (red, yellow, green, teal, blue, White, Purple, and rainbow), 7 LED modes and off mode (wave, full light, RGB spectrum, off, flow, ripple, pulse, and blink), and 4 LED speeds.
• Rgb LED Ring - Nine 16. 8 million colors addressable LEDs provide balanced lighting coverage and brightness.
• 9 fan blade design - designed for balanced air flow and static pressure, Perfect for case or radiator applications.
• Cooling expansion - maintain unified LED lighting when pairing with the water 3. 0 ARGB Series All-in-One coolers for push-pull radiator configuration.
• Silent & efficient - feature hydraulic Bearing self-lubricates with a friction-reducing substance for quiet operation without sacrificing performance.
• Anti-vibration - anti-vibration rubber pads promotes silent operation and protection.
• 3 year

Thermaltake

• 140mm Dual Ring RGB Fans x3 pcs: 12 independent RGB LEDs in every fan, split between two separate light loops, Rainbow and static colors.
• High thermal efficiency: high airflow and large volume cooling by blade design; Super silent: Equipped with rubber pads and rifle bearing, which provide silent operation.
• Easy to use: the fan hub allows you to control the fan speed and LED mode by remote control, or connect to the motherboard, control the fan speed by PWM and light by 5V 3pin ASUS Aura Sync, MSI Mystic Light Sync (J-Rainbow) and GIGABYTE RGB Fusion 2.0 (Please note: It does not support 12V 4 pin RGB header (ex. 4pin Asus Aura is 12V) from motherboard).
• PWM fan control: allows for dynamic speed adjustment, minimizing noise or maximizing airflow.
• RF wireless control: allow you to adjust Fan Speed (S/M/H) and cycle through lighting effects / brightness / LED speed without opening the case. ( Fan control function will be disable on remote when Fan hub/controller connected to the motherboard PWM header)

A ANIDEES