10 Best Static Pressure Fans 140mm of December 2025

• Heavy duty cooling fan, 140x140x25 mm, 12V, 4-pin PWM, max. 3000 RPM, max. 41.3 dB(A), >150,000 h MTTF
• Award-winning 140x25mm A-series fan with Flow Acceleration Channels and Advanced Acoustic Optimisation frame for superior cooling efficiency
• 12V 3000rpm model (41.3dB) with 4-pin PWM connector for automatic speed control via 4-pin PWM fan headers, broad 800-3000rpm speed range
• High-speed industrialPPC version for industrial heavy-duty applications that require extreme cooling performance and advanced ingress protection
• Ruggedised fibre-glass reinforced polyamide construction and IP52 certified water and dust protection

Noctua

• Magnetic Bearing: harnesses magnetic levitation technology to provide lower noise, higher performance, and a longer lifespan. Air flow - 97 CFM. Noise level - 37 decibels
• Custom Rotor Design: delivers the perfect balance between high static pressure and high airflow, operating flawlessly in the most challenging environment
• Extensive Control Range: A 1,600 RPM control range gives you total control between silence and absolute performance

Corsair

• PH-F140SP has a larger base size with a magnetic brushless DC motor to avoid the effects of resonance and for rotational stability. To create better structural strength and reduce the vibration occurrence, Phanteks redesigned the back frame of PH-F140SP.. Air flow - 82.1 CFM. Noise level - 19.0 decibels
• With the noise reduction challenges in mind, we modified the component for lower actuator noise, PCBA for lower electromagnetic noise, brushless motor structure for lower operating noise and frame rib for lower wind and vibration noise.
• The new nine high pressure MVB blades are precisely angled to generate a silent controlled airflow. The blades produces a downdraft vortex allowing for greater amount of air passage through and reduce airflow turbulence across the surface of the blades
• Composed by MOSS and SSC systems, Phanteks' UFB bearings have an effective hub-tip ratio to achieve a state of equilibrium reducing air and vibration noise.
• Eight pre-installed rubber pads are now bigger and designed to reduce more vibration.
• 400mm extension cable included to provide for better cable management and flexibility.
• PH-F140SP has a larger base size with a magnetic brushless DC motor to avoid the effects of resonance and for rotational stability. To create better structural strength and reduce the vibration occurrence, Phanteks redesigned the back frame of PH-F140SP.
• With the noise reduction challenges in mind, we modified the component for lower actuator noise, PCBA for lower electromagnetic noise, brushless motor structure for lower operating noise and frame rib for lower wind and vibration noise.
• The new nine high pressure MVB blades are precisely angled to generate a silent controlled airflow. The blades produces a downdraft vortex allowing for greater amount of air passage through and reduce airflow turbulence across the surface of the blades
• Composed by MOSS and SSC systems, Phanteks' UFB bearings have an effective hub-tip ratio to achieve a state of equilibrium reducing air and vibration noise.
• Eight pre-installed rubber pads are now bigger and designed to reduce more vibration.
• 400mm extension cable included to provide for better cable management and flexibility.

Phanteks

• DESIGNED FOR CASES: Optimized for maximized case airflow of up to 93.91CFM - 120x120x25mm (or 140x140x25mm), 12V, 4-Pin PWM, 68.92CFM(93.91CFM), >60,000hr
• FLUID DYNAMIC BEARING: Patented Matsushita design Fluid Dynamic Bearing (FDB) for reduced noise and increased lifespan of over six years.
• PERFORMANCE ENGINEERED: increased airflow and pressure with engineered winglet fan blades and chamfered intake and exhaust
• CHANGEABLE COLORS: Interchangeable color trim available in blue, red, and white (sold separately)
• WARRANTY: 2 year warranty

NZXT

• 3 RGB fans and a RGB LED controller
• Customizable RGB colors with unlimited color options
• Silent cooling technology
• Smart fan sensor for jam protection
• Certified compatible with Asus Aura, ASROCK RGB, Gigabyte Fusion, MSI RGB

Cooler Master

• OPTIMISED FOR STATIC PRESSURE: Fan guarantees extremely efficient cooling, even with increased air resistance, therefore, the P14 PWM PST is particularly suitable for use on heatsinks and radiators
• 200 TO 1700 RPM REGULATED VIA PWM PST: Thanks to 4-pin connector, the RPM can be regulated in a broad spectrum via PWM, noise is kept at minimum while maximum cooling performance is given when needed
• MORE EFFICIENT TECHNOLOGY: The motor is powered by a Neodym-Iron-Boron-Magnet ring of the newest generation, which allows the new P14 PWM PST to run much more efficiently than its predecessors
• EXTENDED LIFE SPAN: A 10 °C lower motor temperature roughly doubles the life span of a fan, the new ARCTIC motor has a four times longer service life through its low coil temperature
• TECHNICAL DATA: Fan speed: 200–1700 RPM, Airflow: 72.8 CFM/123.76 m³/h (@ 1700 RPM), Noise Level: 0.3 Sone (@ 1700 RPM), Pin: 4-pin

ARCTIC

• RGB LED with 256 unique colors
• Patented circular LED Ring
• Hydraulic Bearing Low-Noise Design
• Concentrated Compression Blades
• Anti-Vibration Mounting System
• 3 Year Warranty

Thermaltake

• Great Thermal Image Test Result: Compared to the standard case fan, the combination of three Ring radiator fans and RL360 radiator delivers 40% better cooling performance. (Inlet and outlet temp. are 49℃ and 44.5℃ in respective, △T= 4.5℃). Air flow - 51.15 CFM. Noise level - 24.1 decibels
• Concentrated Compression Blade: Custom designed for high-static pressure requirements of demanding applications like radiators, the CCB is engineered to focus the inner circle of air outwards, allowing the outer section to pressurize and compress.
• Wind Blocker Frame: To achieve maximum static pressure in all applications, this reduces the blade's noise and vibration, creating a perfect balance between power and sound by creating a compression effect and blocking any pressure from escaping.
• Hydraulic Bearing with Low-Noise Design: The hydraulic bearing self-lubricates with a high quality, friction-reducing substance which lowers operating noise. The LNC (Low-Noise Cable) can reduce the noise level by 21% from 28.1dBA to 22.1dBA.
• 3 years warranty.

Thermaltake

• Air flow - 53.3 CFM. Noise level - 25.3 decibels
• Country of origin : China
• Model Number : PH-F140MP_BK_PWM
• Package Weight : 1 pounds

Phanteks

• Duo-Ring Addressable RGB Lighting 24 Individually Controlled ARGB LEDs for a stunning visual effect
• Performance Engineered Hybrid Static Pressure blade design to tackle resistances in CPU liquid radiator low-noise or mesh chassis ventilation while boosting overall airflow
• Silent Cooling Technology Noise Reduction Technology and Sound Absorbing Materials for a quieter and longer lifespan cooling solution
• PWM Fan Control Dynamic speed adjustment between 650 rpm to 1 800 rpm minimizing noise or maximizing airflow
• Certified Compatibility Compatible with most of Addressable RGB capable motherboards Aura Mystic Light and Polychome Sync
• Wired ARGB controller Color can be adjusted with just a touch of a button without the need for software
• Included Three MF120 Halo 120mm fans + Wired ARGB controller

Cooler Master