10 Best Wort Chiller of December 2025

• 50' Stainless Steel Tubing
• 24" Overall Height9 3/4" Coil diameter
• 9 3/4" Coil diameter
• 8 1/2" Coil Height
• High quality brass hose adapter are also included

NY Brew Supply

• Copper is the material of choice for chillers. Copper has up to 28 times the thermal conductivity of stainless steel
• 9-1/4" round diameter x 17" tall overall height x 3/8" OD Copper
• Braised on garden hose fittings - female Swivel on inlet and male on outlet
• Perfect for 5 gallon batch sizes
• Reduces the chance of infection and exposure to the environment. Improves the clarity of your beer and helps separate cold break, reduces volatile compounds that cause DMS and other off flavors

Home Brew Stuff

• Made in USA
• Drops your worth temperature quickly.
• Vinyl outlet hose: 5' Long.
• Made of Copper. Overall length: 25'.
• Copper Coil diameter: 3/8".

NY Brew Supply

• [Durable Material]: This wort chiller is made of 304 stainless steel plates with 99.9% copper brazed. Using this plate chiller can reduce oxidation in your home brew
• [Quickly Chilling Beer Wort]: This compact heat exchanger is designed for chilling your beer/ wort/water. Compared with the immersion chiller, our heat exchanger has 30 brazed plates and cools wort within minutes rather than several hours
• [Easy To Clean Out]: The heat exchanger can't be dissembled to clean.So firstly you can running 5 gallon cleaning product through this chiller.Then running the clear water into it again.After done, dry it as well as you can
• [Can Work With Water Pump]: The wort-in port of chiller connect your mash tun,the wort-out port connect your fermenter.The side of hose connect the water pump and other side connect the water-in port of our chiller. Using other hose to connect the water-out port of chiller to remove warm water
• [Multifunctional Usage]: Using for cooling wort/beer/water. It's perfect in the lab, for beer brewing, or for any application that requires the exchange of heat between two fluids

Ferroday

• With 2x the SS tubing of our standard chiller, this unit provides faster cooling for larger batches
• Made from 1mm wall stainless tubing to provide better heat transfer
• Coils can be elevated to increase the efficiency of the cooling process
• 10' of Food Grade tubing(33-220℉) allows you to chill your wort directly & safely from the stove
• SS clamps solidify the structure, and allow for adjustability in the coil spacing

BACOENG

• 304 Stainless with 99.9% Copper Brazing
• 2.9"W x 7.5"L x 30 Plates (3.5"H) --- 1/2"NPT Wort Fitting x 3/4" NPT Water Fitting
• -321F to 392F Temperature Range - Max PSI 145
• Cools 10 gallon batches from 212F to 75F in 10 minutes
• 1 Year Warranty

HFS

• A simple tweak, adding barbed fittings and a drop-angle to our favorite immersion chiller, spawns a new best-in-class product. Introducing Silver Serpent, the most sanitary immersion chiller on the market.
• Simply drop your clean chiller into the kettle a few minutes before the end of the boil and it will be ready to go.
• Brew with peace of mind like never before. Drop-angle connections keep surprise leaks outside your kettle and away from cooling wort.
• Standard garden hose connection allows for brewing outside or connects to a laundry sink faucet as your chilling water source.
• Comes fully assembled with tubing, barbed fittings, and hose clamps.

Northern Brewer

• 12. 5-foot kitchen copper worth chiller. Designed for 2-3 gallon batches (brewing kits)
• Made in Michigan with 100% pure 3/8-inch OD USA Copper tubing
• 8 feet of vinyl tubing - (2) 4-foot lengths
• Strong stainless steel hose clamps
• Heavy-duty lead free female garden hose fitting (USA made)
• 6. 75-Inch coil diameter 3-inch coil height 13. 5-Inch inlet/outlet height
• TEST BEFORE USE (EVERY TIME) - Hose clamps need to be checked for leaks before each use. Tightening the hose clamps while the vinyl tubing is warm will create a tight, leak free seal.

Coldbreak

• Material Type: Copper, Vinyl, Brass
• Included Components: Wort Chiller, Tubing, Garden Hose Fitting

NY Brew Supply

• Chill your wort like the professionals do!
• A full 18' of contact area for your wort! The tube-within-a-tube design allows for hot wort to flow through the chiller in one direction, while cooling water flows the opposite direction in a cooling jacket surrounding the wort.
• Threaded Stainless Steel Fittings for ALL Connections (unlike units from other manufacturers). No Brass Connections and No flimsy tubing clamps required.
• Solidly constructed of 304 grade stainless steel with 1/2" NPT Wort Fittings and Male Garden Hose Threaded Water Fittings.
• Low Flow Restriction: Gravity feed your wort or use a pump. The choice is yours!

Northern Brewer