10 Best Wet Tile Saw Under $300 of December 2025

• Corrosive resistant stainless steel top supports tiles up to 12 x 12-inch
• Adjustable rip fence with miter gauge for accurate straight and miter cuts
• Blade cooling water reservoir to keep blade cool while minimizing dust and debris
• Bevel cuts tile from 0 to 45 degrees. Cut material: Stone/Masonry
• Cross cut capacity: 7.75-inch; Diagonal cut capacity: 7.25-inch

Skil

• Extended performance diamond matrix provides long life and enhanced material cutting
• Continuous rim design provides chip free cutting in all types of tile
• XP2 and XP4 blades designed specifically for high power tile saws, allowing quick, free, low heat, and straight cutting
• XP2 and XP3 blades with laser cut expansion slots eliminate blade warping due to heat build-up
• Premium XP2 and XP4 cutting matrix means XP2 gives 2 x's the life of standard blades, XP4 gives 4x's the life of standard blades;

DEWALT

• Blade Size - 5" x 7/8' with 20mm adapter ring
• Tilting range of 0 - 45 degrees
• Max cutting thickness at 90 degrees - 1.6"
• Blade not included
• Powerful 12 amp motor with a no load speed of 12,000 RPM

FLEX

• Designed for use with a wet tile saw
• For wet cutting at speeds up to 8,730 RPM
• 5/8 in. arbor fits most brands of wet tile saws
• Steel blade
• 7mm diamond-coated cutting edge
• 7mm continuous hi-rim
• Cuts glass tile

QEP

• Size:180 x 10 x 2.8 x 22.23 mm;Thickness:2.8 mm,Outer Diameter:180 mm /7 inch;With reducer washer suitable for most tile saws and hand-held angle grinders with a 7/8" or 5/8" Arbor.
• 7 inch diamond blades are universal for dry or wet cutting,Hot pressed and super thin design provide long life
• Turbo segment rim design not only provides faster cutting, but also ensures a longer service life.
• GoYonder diamond saw blades are designed for cutting porcelain, ceramic tile, granite, sandstone quartz, marble, brick, slate and cement backer board.
• Wear all applicable safety gear when using these discs (eyes/ears/face/hands/body/etc).

GoYonder

• Porcelain certified diamond blade cuts porcelain, marble, granite and ceramic tile
• High quality steel with 7 mm, diamond-coated high-rim for less chipping and a cleaner cut
• 5/8 in. Arbor fits most brands of wet tile saws
• 6, 115 Maximum RPM
• Micro segments help cool the blade and prevent wobbling and chipping
• Ideal for high speed cutting of Hard masonry tile

QEP

• Power 10.8 amp motor delivers the cutting power to cut through granite, porcelain, concrete and other stone materials
• Premium 4-3/8-inch diamond blade allows the user to cut ceramics and stone materials up to 3-centimeters deep-wet or dry
• 13-Foot water line feeds water to the blade decreasing dust and increasing blade performance and life
• Bevels to 45 Degrees for quick angled cuts
• Lock-on button reduces fatigue during production cuts

DEWALT

• Hydro lock water containment system keeps water contained near the blade and reduce clean-up time
• Sliding side extension provides support for tiles up to 18 x 18-inch
• Aluminum table top is a durable, rust-resistant surface
• Adjustable rip fence with miter gauge for accurate straight and miter cuts
• Bevel cuts tile at 0, 22.5 and 45 degrees, giving flexibility for different cut types

Skil

• Onboard miter square to help line up miter cuts and repeatable rip cuts
• Roll cage for easy carrying and protection of the cutting cart
• Splash guard keeps water from spraying the tool operator
• Stainless steel fixed deck holds up to water and jobsite abuse
• Equipped with drain plug to quickly drain water over a bucket without a mess.RPM:2850 rpm

PORTER-CABLE

• Replaces the water pump in a tile saw
• Designed for RIDGID tile saws R4007, R4010 and R4090
• Compatible with most brands of tile saws
• 50 GPH maximum output

Ridgid