10 Best Wet Look Concrete Sealer of December 2025

• The Armor AR350 is a breathable, non-yellowing solvent based acrylic that will darken concrete and pavers to make them look wet, and provide a long lasting, durable low gloss finish.
• The Armor AR350 is manufactured in the US and made from non-recycled resins.
• The Armor AR350 is self-priming and can be applied to unsealed concrete and paver surfaces, as well as surfaces previously sealed with a solvent based acrylic sealer.
• The Armor AR350 will help to reduce damage and deterioration caused by surface abrasion such as dustring, cracking, spalling, and pitting.
• The Armor AR350 can last up to 1-3 years on exterior surfaces and up to 3-7 years on interior surfaces before the need for a recoat.

Foundation Armor

• Do It Yourself - Easy to Apply With a Paint Roller, Dries Quickly
• Clear Concrete Sealant Leaves an Attractive, Durable, Semi-Gloss Finish
• Protects Against Color Fade on Stained Concrete, Stamped Concrete Or Patio Paver Floors
• For Both Interior & Exterior Use - Can Be Applied Over Previous Concrete Sealer Applications
• Eco-Friendly, Water-Based Formula Is Easy to Cleanup and Safe for Surrounding Vegetation

MasonryDefender

• Penetrating high solids, breathable solvent based acrylic coating with unmatched bonding characteristics.
• Durable, long lasting. Stands up to abrasion, UV rays, hot tire pick up, hot and cold temperatures.
• Long lasting high gloss finish provides up to 2-5 years of life on a two coat application before the need for a recoat. Will bring out color in dull and faded surfaces.
• Can be used on poured concrete, stamped concrete, concrete pavers, aggregate, and more.
• Can be used on unsealed surfaces, or on surfaces previously sealed with a solvent based acrylic.

Foundation Armor

• Water repellent characteristics help to reduce deterioration caused by water absorption and freeze-thaw cycles
• Will last for up to 3-5 years before the need to reseal
• Breathable, low VOC, single coat application.

Foundation Armor

• 100% pure acrylic, high performance lower odor solvent sealer
• Produces a semi gloss "Wet Look" to just about any type of subtrate
• Highly durable for a fraction of the cost of Urethane & Epoxy sealers.
• Non-yellowing formula (Doesn't yellow the surface in time)
• Lower odor than most solvent based sealers on the market

EnduraCoat

• Will darken the surface of unsealed concrete, brick, pavers, stone, slate, and porous masonry to make it look wet
• Will NOT leave behind a surface film, works entirely below the surface
• Water repellent characteristics help to reduce deterioration caused by water absorption and freeze-thaw cycles
• Will last for up to 3-5 years before the need to reseal
• Breathable, low VOC, single coat application.

Foundation Armor

• Deepened wet look appearance
• Water base formula
• Use indoors and outdoors
• Resist oil, grease and food stains
• Efflorescence resistant

Glaze 'N Seal

• Repels water and protects from oil, gasoline, grease, salts, acids, household chemicals, food stains
• Ideal for: Decorative or standard gray concrete, pavers, masonry. brick, natural stone
• For interior or exterior use - UV resistant
• Apply at 200-400 sq ft per gallon . Coverage will depend on surface texture and porosity
• Best appearance is obtained with a high density foam roller

Quikrete

• Penetrating high solids acrylic coating with unmatched bonding characteristics.
• Durable, long lasting, professional grade solvent based acrylic offering superior performance abilities.
• Satin sheen wet look finsih. Will bring out color in dulled substrates.
• Can be used on poured concrete, stamped concrete, concrete pavers.
• 1 gallon will cover up to 100 square feet in two coats.

Foundation Armor

• Resistant to freeze thaw cycles, de-icing salts, mold, mildew, algae.
• Offers superior water repellency and a lasting, durable high gloss.
• Combines the power of two sealers: a penetrating water repellent and a high gloss acrylic coating.
• Resistant to chlorine and salt water. Non-Yellowing, UV resistant.
• Protects and enhances concrete, aggregate and paver surfaces. Can be used to cure new concrete.

Foundation Armor