10 Best Uhf Mobile Antenna of December 2025

• No tuning needed
• Unity gained
• 200Watts of power
• Solid brass NMO mount with Black note finish

Tram

• Frequency Range: VHF 136-174MHz, UHF 400-470MHz;
• Feature: Strong Magnetic Base Mount; Antenna Base Mounting: NMO Mount; Antenna Cable: 5m RG58/U Cable; Cable Connector: UHF PL259 Male Connector;
• Compatible with Amateur Mobile Radio, Ham Radio, FRS GMRS Two Way Radio: BTECH, ICOM, Kenwood, Midland, Yaesu, TYT, AnyTone, Radioddity, Cobra, Uniden, President, Galaxy Audio, Pro Trucker, Stryker;
• Compatible with: Marine Boat VHF Radio, Ham Radio, Two Way Radio, Amateur Radio Mobile Transceiver, FRS GMRS MURS Radio, Walkie Talkies;
• Package List: 1 x Antenna (As the Picture Shown);

Bingfu

• Working Frequency - Dual-Band car ham antenna work on Dual-Band VHF 136-174MHz, UHF 400-520MHz. Compatible with: Amateur Radio; Car Mobile Radio; Ham Radio; Two Way Radio; Marine VHF Radio and etc.
• Antenna Cable - 10ft RG58 cable with uhf pl259 male connector, connecting with uhf so239 female connector. It is low loss and low SWR. The cable is made of highly tinned copper braid shields and pure copper that could be maximum protect the signal.
• High Gain & Low SWR - This car vhf antenna feature with 3dB, improve signal transfer and make it sound clarity. SWR is 1.8. No obvise rising. 100% highly shield performance. Work well with your radio, receive signal in good condition and on time.
• Magnetic Base Mounting- This car ham radio antenna feature with strong magnetic, making it easy to istall. Strong magnet base support fit on car roof in second without falling when strong wind.
• Durable & Waterproof - Well made car uhf antenna, made of waterproof and windproof stainless steel, it is durable to used in harsh environment. It could mount the uhf vhf antenna on any vehicle and allow to get better clear voice and transfer signal accurately.

XRDS -RF

• UHF:400-470MHz;VSWR:< 1.5.
• Gain:2.5dBi; Maximum Power Input-watts:150W.
• 400-470Mhz Antenna Work for Motorola Kenwood Icom Vertex Blackbox HYT Hytera Mobile Radios
• The mount is a "trunk lid" mount with 13'/about 4m RG-58U cable
• This requires a small (typically 3/8" to 3/4" ) hole be drilled through the surface hosting the mount, and is the best choice for an extremely rugged installation.

HYS

• No tuning needed
• Unity gain vhf
• 2.5Dbd gain uhf
• Solid brass nmo mount with Black kote finish
• Gold plunger-type contact pin

Tram

• [Electrical specifications] Frequency Range(MHz):350-500MHz; Impedance:50 ohm Gain:6.0dBi; Polarization:Vertical; Lighting Protection: Direct Ground;
• [Electrical specifications] VSWR:<1.5; Horizontal Beam Width: 360 Degree; Vertical Beam With: 17Degree; Maximum input power:100W.
• [CONNECTOR]: SL-16K (FEMALE)/ UHF FEMALE. It is designed to provide pattern coverage that is optimized for outdoor coverage requirements at 350-500Mhz.
• [Antenna Length and connector] Dimension/Height: 940-1100±10mm (The adjustment scale on the antenna is adjusted to a suitable frequency position. Different antenna scale, the antenna effect and length are different.);
• [Aluminum Alloy Mounting Bracket] Hold Pole Diameter:Ø30—Ø60mm; Material of Hardware-supplie Mounting Bracket made from Aluminum Alloy, designed for indoor and outdoor use. it comes with TWO U-bolt which can be used with the attached plate for pole mounting. It must be connected via coaxial cable to connect device.
• Heavy-duty Outdoor weatherproof Aluminum Alloy with high gloss, integrated ground plane. Includes mounting bracket and hardware; Coax cable purchased separately.
• [350-500Mhz Antenna] Antenna Designed for any 350-500Mhz device for receivers, 350-500Mhz antenna for 350-500Mhz device receivers to improve signal in receiving and transmitting.
• UHF(350-500Mhz) antenna for many outdoor applications, including building rooftops, utility poles, homes and offices etc.

HYS

• VHF:136-174MHz;VSWR:< 1.5.
• Gain:2.5dBi; Maximum Power Input-watts:150W.
• 136-174Mhz NMO Antenna Work for Motorola Kenwood Icom Vertex Blackbox HYT Hytera Mobile Radios
• The mount is a "trunk lid" mount with 13'/about 4m RG-58U cable
• This requires a small (typically 3/8" to 3/4" ) hole be drilled through the surface hosting the mount, and is the best choice for an extremely rugged installation.

HYS

• Include: X1 18 inches Dual-Band VHF & UHF Antenna, X1 10 Ft RG58 Cable with PL-259 Connector and Magntic Base.
• Fastly Installation: 2.95" Strong Rare Earth Magnet Base. Fix it on the car roof in a second.
• High Performance: To get better Performance, You can change the antenna positions on the top of car. Omni-Directional Dual-Band VHF & UHF (137-149,437-480 Mhz),VSWR: Less 1.4 (145 Mhz)/ Less 1.2 (455 Mhz),Gain 2dBi/ 3dBi
• More Durable: Waterproof Design,Stainless Steel Antenna,RG58 Heavy duty Cable,Antifreeze materials
• Quality Assured: One Year Warranty, Just Replace New for you if quality problem.

VFAN

• 3Dbd gain vhf great for signal amplification
• Premium-quality, solid-brass chromed base
• Great for all your needs
• Package Dimensions: 14.25" L x 2.55" W x 4.55" H

Browning

• High Gain 4.5 dBd
• 29 Inches
• Pre-Tuned 438-485 MHz
• 15 Feet of RG-58 Cable with PL-259 Connector
• Yaesu Kenwood HYT Vertex Icom Mobile Radios

tram-browning