10 Best Tube Amplifier of March 2024

List of Top Rated Tube Amplifier from thousands of customer reviews & feedback.

Updated On Mar 2024

2,682 Reviews Studied

By Customer Ratings

1
Image
Rockville BluTube 70W Tube Amplifier/Home Theater Stereo Receiver with Bluetooth Read Review

  • Rockville BluTube Bluetooth tube 70 watt amplifier/home theater stereo receiver
  • Rockville BluTube audiophile grade tube amplifier with Bluetooth. 25 watts x 2 RMS @ 8 ohm. 35 Watts x 2 RMS @ 4 ohm. Tube Amps do not hard-clip even at high volumes and are extremely efficient. Due to this the amp sounds more like double the rated power!.
  • Built in Bluetooth with 33 foot range. Built-in preamplifier. (2) sets of RCA inputs to connect to any audio device like a TV, laptop, or MP3 player, etc.
  • Headphone output. Vu meter. Adjustable bass and treble (2 band equalizer). USB input for music files from USB thumb drive. Usb can charge your phone or other USB device. Rear speaker terminals: banana Plug/ binding post outputs for 2 speakers.
  • Frequency response (3dB): 25hz-20khz. Input impedance: 47Ko. Input sensitivity: 300mV. Output Impendence: 4-8ohm. Total harmonic distortion): =0.02%. Signal-to-Noise ratio(s/n): =86dB. Bluetooth: 2.1+Edr. Usb: Supports WAV/MP3/WMA/APE/FLAC. 110V/220V switchable. Unit weight: 6.6 lbs. Unit dimension: 10.6"X10.2"X5.1".

2
Image
Reisong A10 EL34 Hi-Fi Audio Stereo Tube Amplifier Single-end Class - A Amp Read Review

  • With an English Operation Manual,If you need a circuit diagram, please contact us by email, thank you!
  • Manual welding, preferred audiophiles, the output transformer switch to the higher end of the 76 * 40 output transformer.
  • When low-frequency dynamic playback is good, control and strong, it is more powerful.
  • Tube: EL34 × 2,6N2J × 2,5Z4PJ × 1
  • Warm reminder: You should take about 30-100h time to operate the amp.RUN-IN to the amp gives it's best and stable sound.So during the first 100h use time the sound maybe is not the best,you can also use your own run-in method.

3
Image
Monoprice 611815 15Watt, 1 x 12 Guitar Combo Tube Amplifier with Celestion Speaker & Spring Reverb Read Review

  • Superior guitar tone and flexibility using this 15-Watt, 1x12 Guitar Combo Tube Amplifier with Celestion Speaker & Spring Reverb from Monoprice!
  • Features a 15-watt tube power amplifier and a Celestion brand speaker. Amplifier Load Range: 8 ~ 16 ohms
  • Uses three ECC83/12AX7 preamplification tubes and two EL84 power tubes for the amplifier section, plus a Celestion Red Truvox 1215 speaker.
  • Handles frequencies between 80Hz and 10kHz, with hum and noise -75dB below the rated power and 0.5% total harmonic distortion.
  • The cabinet is ported in the rear and features a leather handle, cloth speaker grill, and a cream-colored, textured, synthetic leather exterior with chrome corner guards

4
Image
YAQIN MC-13S Push-Pull Integrated Stereo Tube Amplifier(Without Protect Cover) Read Review

  • MC-13S is the latest upgraded version of MC-10L. It is powered by Yaquina 6CA7T tubes which are better than Shu Gang EL34B in sound quality
  • An analog VU meter on the front panel to monitor the average of the two channel output levels
  • Class A push-pull power amplifier to reduce distortion
  • Ultra linear push-pull amplifier provides greater output power
  • Caution: The product don't have plastic cover. To protected the amp, tube and machine are packed individually.

5
Image
Dayton Audio HTA20BT Hybrid Stereo Tube Amplifier with Bluetooth 4.2 USB Aux in Headphone Sub Out Read Review

  • Tube warmth, class D efficiency
  • Bluetooth 4.2, Aux, and USB inputs
  • Subwoofer output for adding an active subwoofer
  • High quality headphone amplifier built in
  • Extremely low THD <0.1% @ rated power

6
Image
Monoprice 611705 5-Watt 1x8 Guitar Combo Tube Amplifier - Tan/Beige with Celestion Super 8 Inch Speaker, 12AX7 Preamp, V... Read Review

  • As the title indicates, this guitar amplifier features a 5-watt tube power amplifier and a Celestion brand speaker.
  • It uses a ECC83/12AX7 preamplification tube and a 6V6GT power tube for the amplifier section, plus a Celestion Super 8 GBA-15 speaker.
  • The amplifier handles frequencies between 80Hz and 10kHz, with hum and noise -75dB below the rated power and 0.5% total harmonic distortion.
  • It includes a Low input and a High input, with the former attenuating the signal by approximately 50% and the latter being easier to overdrive.
  • While tone is always debatable, the increased dynamic range and even-order harmonicdistortion of tubes produces the better sound.

7
Image
Stereo Hybrid Tube Amplifier - ACIN Class AB Bluetooth Integrated Power Amplifier with Headphone Out, USB Read Review

  • ❤️ WARM AND RICH SOUND: The tube preamp stage adds warmth and richness that solid-state circuits can't touch, breathing new life into your digital music.
  • ❤️ CLASSIC DESIGN: Featuring a polished piano black case and a brushed aluminum face, the exposed tubes and lighted VU meter combine to give this amp a sexy appearance.
  • ❤️ VARIOUS CONNECTIONS: Featuring USB, wired RCA and wireless Bluetooth connections, it achieves a level of versatility and easy usability that is unsurpassed.
  • ❤️ POWERD AMPLIFIER: The 25-watt hybrid tube amp can sound as loud or louder than a 50-watt solid-state amp.
  • ❤️ SATISFACTION GUARANTEED: 30-Day money back and 1-Year warranty.

8
Image
Nobsound MS-10D MKIII HiFi Bluetooth Hybrid Tube Power Amplifier Stereo Subwoofer Amp USB/Opt/Coax Read Review

  • MKIII is the upgrade version of our popular MKII. MKIII is added with coaxial and optical inputs as well as active subwoofer output. The circuit design is also upgraded to ensure lower background noise and purer sound.
  • With 5 kinds of audio input (Bluetooth, USB, Coaxial, Optical, RCA) and 3 kinds of audio output (Banana speakers, subwoofer, 3.5mm headphone), compatible with almost all audio devices such as mobile phone, notebook, PC, PSP, CD players and so on to meet the different needs of home audio systems.
  • Low-requency signal output is speciallyed designed to connect active subwoofer, strengthen bass sound effects to bring more shocking experience just like in the cinema. With treble and bass control to bring more delicate sound according to your own listening style.
  • Using 6P1 and 6N1 vacuum tubes, the sound is clear, warm, smooth and delicate, U-disk supporting lossless music formats such as WMA/WNV/MP3/FLAC to provide HiFi enjoyment.
  • Unique design and attractive appearance, exquisite black lacquered panel and retro vacuum tube are combined to create a luxurious and elegant artistic atmosphere, very suitable for home and desktop audio system use.

9
Image
Reisong Hi-Fi Audio Amplifier MT-88 MKII KT884 Vucuum Tube Amp Push-Pull Read Review

  • Handmade scaffolding welding, a simple and generous proces, short wiring, upgrade and change materials are simple.
  • Voltage amplification 12AT7, 12AU7 current drive, KT88 push-pull power output.
  • With ultra-linear transfer function, the perfect balance of push-pull machine play of strength and beauty.
  • 80W output transformer design, fine tightly around 5 clip 3
  • Japan ALPS volume dedicated potentiometer, can guarantee a 5-year long life warranty.

10
Image
MUZISHARE X7 KT88 x4 Push-Pull Vacuum Tube Integrated Amp Power Amplifier MM Phono amp Remote Upgrade Read Review

  • MUZISHARE X7 Upgraded version. Upgraded the internal coupling capacitor, is the designer to debug the custom-made silver film capacitor, relative to the classic version of the extension, control, density is better.
  • MUZISHARE X7 is an integrated Amplifier. This is also a Power Amplifier (there is a group pre-amp input), a Headphone amplifier and this is a amplifier for Phono player too, direct link your phono player to this amplifier to output to speakers.
  • Pure Handmade,point to point hand welding using two high-quality wide-frequency high-quality Japanese EI output transformer using a high-power Z11 core toroidal power transformer dedicated designed for the machine , voltage amplification and promote are used tube 5AR4 for rectifier power supply.
  • Use 12AX7 and 12AU7 vacuum tube for voltage amplification and phase inversion,use KT88 vacuum tube to do AB1 push-pull power amplification; Mute delay function when turn on the amp(about 30 seconds) ;the choice of Japanese ALPS motor potentiometer
  • Provide Triode and Ultralinear selection function: Triode work mode. soft. pure and sleek. suitable for enjoying vocals. strings Music and other types of music; Ultralinear work. the sound of open. unrestrained. the momentum is good. for large scenes. large dynamic type of music. Peripheral power tube current adjustment knob and current display meter. With pure power amplifier features. can be linked the pre-amp signal input. with the phono function. can be connected to the Phono player