10 Best Torque Converter of September 2025

• 【30 Series Torque Converter Clutch Kit】 This 3/4" Torque Converter is a direct replacement fits all models of Comet TAV2 Torq-A-Verters 218353A, 219552A, 219456A, 217610A. It fits all engines with a 3/4" Straight Crankshaft. Replaces Comet, Also Fits Manco Go Karts.
• 【For your convenience this kit comes with both sprockets】This torque converter fits a 3/4" shaft and comes with a 10 tooth sprocket for a #40/41/420 chain and a 12 tooth sprocket for a #35 chain. It will work with engine sizes hp2 to 8hp. 30 series Asymmetrical design. Bring your off-road machine to life.
• 【The Belt Feature】 Length: 70.5cm / 27.76", Outside circumference: 27 23/64" , Width is 3/4".（1.9cm / 0.75"). Center to Center of driver and driven: 6-15/16 to 7".
• 【Special function】This clutch will help you get more power out of your small engine by reducing engine load, A torque converter acts similar to a transmission, allows higher speeds out of your small engine, and smoother acceleration.
• 【Go Kart Torque Converter Kit comes with】1 x 3/4" Driver Pulley;1 x 5/8" Driver Pulley; 1 x Plastic Assy Cover;1 x Aluminum Mounting Plate;1 x Drive Belt; 1 x 10 Tooth Sprocket for #40/41/420 Chain; 1 x 12 Tooth Sprocket for #35 Chain(Chain not included); 1 x Full Mounting Hardware. Note This is not made by Comet

MOOSUN

• Replaces stock converter for better launch capability and more strength
• Value priced upgrade for mild performance applications and street rods
• Stall speed of 1900-2100 RPM (based on an engine producing 230 lb. ft. of torque at 2500 RPM)
• High quality remanufactured unit features a new precision pump drive tube
• Backed by the manufacturer with a 1 year limited warranty
• Bolt Circle Diameter - 10.75 INCHES

B&M

• Diameter : 12" (1985-1997 - 4.3L 5.0L 5.7L engine)
• Mount : 3 pads
• Spline : 30
• Unlimited Miles 1 Year Warranty
• Please TEXT with any question 562 644 1534. After purchase, please provide your vehicle info: YEAR, MAKE, MODEL, ENGINE SIZE so that we can confirm correct fit : Please EMAIL US or TEXT to 562 644 1534.

TORCO

• Comet Torque Converter kits are used in small vehicles, riding lawnmowers, small tractors, go karts, mini bikes, mini choppers, ATV, motorcycles, and waterski winches
• Comet Torque Converter 30 Series small engine belt drive pulley clutch kit will help with more take off power, smoother acceleration, climbing ability, and top end speed by providing more torque in the low end and higher speeds in top end.
• Go Kart Torque Converter Kit is a direct replacement and fits all models of Comet TAV2 Torq-A-Verters 218353A, 219552A, 219456A, 217610A, and 203814A 30-75 . Vehicles currently using a centrifugal clutch can easily upgrade to a bolt on TC2 torque converter saving money from burned up CC units
• Comet 30 Series Torque Converter kit bolts on to most engines with a horizontal shaft including: Briggs, Clinton, Honda and clones, Kohler, Lifan, Robin, and Tecumseh motors. THIS KIT INCLUDES COARSE THREAD SCREWS.
• Driver clutch bore: 3/4"(19mm),Driven unit: Overall Diameter 6" (5/8" driven pulley) ,Sprocket teeth: 10 teeth #40/41 chain. This is a complete kit that includes both drive and driven clutch pulleys, belt, aluminum engine mount plate, built in jackshaft with sprocket, all mounting hardware, and instructions.

Bullet Lines

• Diameter : 12.5" - 300mm Converter Code: TMBX TLBX 300mm shaft - LS engine 4.8L 5.3L 6.0L
• Mount : 3 pads
• Spline : 30
• Unlimited Miles 1 Year Warranty
• Please TEXT with any question 562 644 1534. After purchase, please provide your vehicle info: YEAR, MAKE, MODEL, ENGINE SIZE so that we can confirm correct fit : Please EMAIL US or TEXT to 562 644 1534.

TORCO

• Made of high quality iron and aluminum material, which is sturdy, durable, maximum torque, wear-resisting and fast heat dissipation
• 30 series go kart torque converter clutch kit fit all engines with a 3/4 inch straight crankshaft
• Replace for Comet Predator Manco;Recommended engine: 6.5 HP 212CC engines, 3/4"shaft with flat key
• 2 Sprockets Includes: 1 x 12 Tooth Sprocket for #35 Chain(Chain not included), 1 x 10 Tooth Sprocket for #40/41 Chain (Chain not included)
• It can reduce engine load and make your small engine more power,even offer higher speed and smoother acceleration for your engine

ＳＵＮＲＯＡＤ

• Comet Torque Converter kits are used in small vehicles, riding lawnmowers, small tractors, go karts, mini bikes, mini choppers, ATV, motorcycles, and waterski winches, fit all engines with a 3/4 inch straight crankshaft.
• Go Kart Torque Converter Kit is a direct replacement and fits all models of Comet TAV2 Torq-A-Verters 218353A, 219552A, 219456A, 217610A, and 203814A 30-75
• Comet 30 Series Torque Converter kit bolts on to most engines with a horizontal shaft including: Briggs, Clinton, Honda and clones, Kohler, Lifan, Robin, and Tecumseh motors.
• Driver clutch bore: 3/4"(16mm), Driven unit: Overall Diameter 6" (5/8" driven pulley) , Belt Top Width: 19mm(3/4"), Sprocket teeth: 12 teeth for #35 chain
• This is a complete kit that includes both drive and driven clutch pulleys, belt, aluminum engine mount plate, built in jackshaft with sprocket, all mounting hardware.

MOOSUN

• 1-4 Days Delivery,1 year warranty
• unique engine bolt kit for predator engines and the correct anti vibration pilot washer.
• Include 2 sprockets : 10 tooth sprocket for a 40/41 chain and a 12 tooth sprocket for a 35 chain.
• small engine clutch that is nearly the same as a Comet TAV2 30 75 Torq A Verter A torque converter acts similar to a transmission, allows higher speeds out of your small engine, and smoother acceleration
• Engagement range is approximately 2350 RPM

NORMAL

• Allows automatic transmission to come to a stop while still in gear, and move forward when brakes are released
• EC3 material maintains appropriate heat range to prevent overheating
• Designed to help with noise reduction, vibration, and harshness when shifting

ACDelco

• Package Included: 1 x 3/4" Driver clutch bore, 1 x Overall Diameter 6" (5/8" driven pulley), 1 x 10 Tooth Sprocket for #40 #41 #420 Chain (Chain not included), 1 x Drive belt, 1 x Plastic Assy Cover, 1 x Full Mounting hardware Kit, 1 x Aluminum Mounting Bracket Plate. (As Pictures Shown)
• Engine Compatability: 6.5 HP (212cc) OHV Horizontal Shaft Gas Engine. 3/4"shaft with flat key
• Comet 30 Series Torque Converter kit bolts on to most engines with a horizontal shaft including: Briggs, Clinton, Honda and clones, Kohler, Lifan, Robin, and Tecumseh motors
• Comet Torque Converter kits are used in small vehicles, riding lawnmowers, small tractors, go karts, mini bikes, mini choppers, ATV, motorcycles, and waterski winches. Engagement range is approximately 2350 RPM; however, this can be adjusted from Minimum 1200 RPM - Maximum 3100 RPM by changing out springs (not included) and other adjustments
• Replace Part Number: Comet TAV2 Torq-A-Verters 218353A, 219552A, 219456A, 217610A, 203814A 30-75

Ameetaa