10 Best Table Saw Fence of December 2025

• One piece square tubular rail
• Mounting design attaches to Delta table saws including Contractor Saw , Hybrid Saw , and Unisaw models
• Three-point locking system with twin hairline pointers to assure fence is parallel to blade and accurate to within 1/64 of an inch (0. 4mm)
• Easy-gliding, steel tube fence body to handle Quick, precision ripping, and square cuts
• Fence securely clamps to front tube and hooks over rear rail to allow for fence attachments

Delta

• Genuine Ryobi Replacement Parts
• Compatible with the RTS10 10" Table Saw

RYOBI

• This is an O.E.M authorized part
• Fits various DEWALT models
• OEM Part Number 514013598
• This is a DEWALT replacement part
• Part Number 514013598
• This is an O.E.M. part

DEWALT

• This is an O.E.M. authorized part
• Fits various Bosch Parts models
• OEM Part Number 2610950148
• This is a Bosch Parts replacement part
• Part Number 2610950148

BOSCH

• Measures up to 60-inches total length
• Simple mounting brackets easily attach to almost any rectangular rail or round rail fence
• Large easy to read display reads in inches with fractions or millimeters
• Mounts on the left or right side of the fence
• Magnetic attachment allows the fence to be removed and maintain calibration

Wixey

• Item may ship in more than one box and may arrive separately
• Easy to install and easy to set up on any brand of saw; UPC-coded packaging
• Long rails provide an awesome 54-Inch maximum rip to the right of the blade

Shop Fox

• The Fulton Miter Gauge is a high quality, well thought out and economical solution for your table saw cross cutting needs.The Aluminum Miter fence is equally well thought out with its 45 degree ends for unsurpassed workpiece support and its ability to mounted to most any miter gauge. Also included is a handy aluminum flip stop for repetitive angled cuts on your table saw. Together these three items are the perfect compliment to each other for your table saw cutting needs.
• The .200” thick, adjustable, solid aluminum head is machined with 13 positive stop holes. 1 hole is at 90 degrees while the 6 holes on both sides are at 22.5, 30, 45, 60, 67.5 and 90 degrees. The positive stops are perfect for many woodworking projects as they are the angles that are typically used.To adjust the head you simply loosen the post knob handle, pull the spring loaded indexing pin outward, rotate the head to the desired position, release the pin and lock into place.
• The head is mounted to a solid steel miter bar that measure 18” in length and is .353” thick by .730” wide. Standard miter slots (not Craftsman or Sears brands) are 3/4” x 3/8” with a 1/8” “T” slot (slight variances from brand to brand) running the length on the bottom of the slot. The steel miter bar is equipped with a metal, removable retaining disc that measures 7/8” in diameter and is just shy of 1/8” to fit into to the “T” slot to prevent accidental lifting when feeding your stock through.
• Made from a single piece of extruded aluminum, this precision miter gauge fence is not only durable, its accurate and saves setup time. The fence is designed to be used with most any miter gauge with its off-set mounting track on the back of the fence. The off-set track allows you to flip the fence for lower profile miter gauge mounts and flip back for standard height miter gauges. The fence can be mounted to older miter gauges by adding a wooden block mount with wooden screws if necessary.
• Both ends of the fence are cut at exactly 45 degrees. This allows you to position the fence extra close to the saw blade (with the power turned off) so you have even more control over the workpiece you are cutting. The fence comes with a flip stop that makes repetitive cuts a breeze. When not in use the flip stop can be flipped up and out of the way. Also include are two sticky back measuring tapes. 1 tape is left to right reading and the other is right to left reading.

Fulton

• Table saw fence system fits a variety of saws
• 36-Inch fence bar (26 inches to right, 8 inches to left of blade); micro adjustment and auxiliary table support
• Steel construction; assembly required
• Table saw fence system; saw not included
• 34 pounds

Vega

• Wide right angle design for maximum accuracy and support
• Single locking cam action lever HDPE plastic fence surgace for extremely low sliding resistance
• Standard rails provide 25-Inch maximum rip to the right of the blade

Shop Fox

• Includes (1) 2610011707 Rip Fence
• New, Bulk Packed
• Genuine Skil Replacement Part
• Consult owners manual for proper part number identification and proper installation
• Please refer to list for compatibility

Skil