10 Best Sump Pump Backup System of December 2025

List of Top Rated Sump Pump Backup System from thousands of customer reviews & feedback.

Updated On Dec 2025

1,073 Reviews Studied

By Customer Ratings

1
Image
Wayne ESP25 Upgraded 12-Volt Battery Backup System, Black Read Review

  • Upgraded ESP25 with epoxy steel body and cast-iron base. No more plastic
  • 2700 GPH at 0' provides additional protection to your primary Wayne sump pump
  • Assembled in USA, performance that lasts for years
  • Audible alarm sounds, notifying you when the back up system is active
  • Easy to read LED display shows back up system readiness
  • Requires a 75 amp hour battery, recommended for use with the Wayne Wsb1275 75 amp hour battery
  • Protective Battery Case Included with LED Display and Audible Alarm to Let Homeowner Know There’s a Problem
  • Corrosion-Resistant Thermoplastic Impeller for Maximum Water Flow

2
Image
THE BASEMENT WATCHDOG Model DFK961 1/3 HP Combination Submersible Sump Pump with Cast Iron/Cast Aluminum Primary Sump Pu... Read Review

  • Pre-assembled system allowing for easy installation with little or no plumbing knowledge necessary
  • ⅓ HP energy efficient permanent split capacitor (PSC) primary pump saves money on your electric bills
  • Primary pump capacity 3,100 GPH at a 10 ft. lift and 3,700 GPH at 0 ft. lift
  • Backup system capacity 1,000 GPH at 10 ft. lift and 2,000 GPH at 0 ft. lift
  • Includes the Basement Watchdog Emergency Battery Backup System with unique monitoring that sounds an alarm, illuminates a warning light and describes what to do for easy maintenance
  • Dual float switches on both the primary and backup systems provide 4X the protection
  • Provides days of intermittent pumping power on a single battery charge
  • Compatible with both wet cell and maintenance-free AGM batteries
  • Automatic 0.4 amp charger
  • Fluid sensor monitors fluid level of the battery

3
Image
Zoeller 508-0006 Aquanot 508 ProPak53 Preassembled Sump Pump System with Battery Back-Up Read Review

  • Includes: Model 53 115-volt pump, Model 508 Aqua not, 115 Volt DC backup system with pump, check valve, float switch and piping
  • Plumbed in 1-1/2" Such 40 PVC pipe
  • Comes fully assembled and ready to install in your clear water sump
  • Extra protection when the primary AC pump fails due to power outages
  • Fully solid state automatic 10A charger/controller with alarm, light indicator and warning system

4
Image
THE BASEMENT WATCHDOG Model BW4000 1/2 HP Combination Submersible Sump Pump with Cast Iron/Cast Aluminum Primary Sump Pu... Read Review

  • Package contains: Controller, charger, two dual micro reed float switches, primary pump and backup pump, instruction manual (battery and acid sold separately)
  • Back-up starts immediately after loss of power or if flow of water is too great for the AC pump alone
  • Back-up features unique monitoring systems to diagnose problems and sound an alarm
  • Compact, fits in pits as small as 12-Inch in diameter.

5
Image
THE BASEMENT WATCHDOG Big Combo CONNECT Model CITS-50 1/2 HP Primary and Battery Backup Sump Pump System with Smart WiFi... Read Review

  • 1/2 HP energy efficient permanent split capacitor (PSC) primary pump can save money on your electric bills
  • Primary pump capacity 3,540 GPH at a 10 Ft. lift and 4,400 GPH at 0 Ft. lift. Backup system capacity 1,850 GPH at 10 Ft. lift and 2,600 GPH at 0 Ft. lift
  • Includes a WiFi capable battery backup system that provides 24 hours a day monitoring of pump, power and battery conditions, backup controller will sound an alarm, illuminates a warning light and describe what to do for easy maintenance
  • Allows for connection to a Basement Watchdog CONNECT Module (BW-WiFi or BW-HZM), giving you real time alerts via text, email, or through the Basement Watchdog App
  • Provides days of intermittent pumping power on a single battery charge and is compatible with both wet cell and maintenance-free AGM batteries. Connect two batteries in parallel for double the run time

6
Image
THE BASEMENT WATCHDOG Model BWSP 2,600 GPH at 0 ft. and 1,850 GPH at 10 ft. Special CONNECT Battery Backup Sump Pump Sys... Read Review

  • Pumps 2,500 GPH at 0 ft. of lift and 1,730 GPH at 10 ft. of lift
  • User-friendly control panel lights up with a warning and describes what to do for easy maintenance
  • A sensor monitors battery fluid levels for increased piece of mind
  • Includes controller, charger, dual float switch, pump and battery box (battery sold separately)
  • Compact pump can be installed even in small or narrow sump pits

7
Image
THE BASEMENT WATCHDOG Model BWE 2,000 GPH at 0 ft. and 1,000 GPH at 10 ft. Emergency Battery Backup Sump Pump System Read Review

  • Pumps 2,000 GPH at 0 ft. lift and 1,000 GPH at 10 ft. lift
  • User-friendly controller monitors battery, pump and power conditions 24 hours a day
  • Provides days of intermittent pumping power on a single battery charge
  • Compatible with both wet cell and maintenance-free AGM batteries

8
Image
Pump Sentry 822 PS- Emergency Power for Sump Pumps by Sec America Read Review

  • 1200 Watt Battery Back Up System, UL & CSA Approved
  • Battery Cables Included, Rugged Aluminum Housing Compact Size
  • For Wall Mount or Surface Mount Installation
  • You will need to purchase (separately) a 12 volt deep cycle marine battery up to 200 amps
  • 2 Year Factory Warranty

9
Image
WAYNE ESP15 Battery Back-Up 12 Volt Sump Pump System Read Review

  • 720-Gallons per hour at 10-feet of lift and maximum flow is 1750 gallons per hour
  • Corrosion resistant thermoplastic construction
  • Alarm sounds to notify you when the backup system is active
  • Requires one 40-ampere hour or one 75-ampere hour battery
  • 1-Year limited warranty

10
Image
Raybend Primary Sump Pump Backup Power System Read Review

  • Automatically switches over to Battery Power when AC power goes out. (Battery Not Included. A Deep Cycle AGM Battery is Recommended)
  • Generates a Pure Sine Wave 120 VAC voltage to reliably power your primary sump pump
  • Automatically recharges a Battery When AC Power is restored with a powerful 10 Amp Built-in charger
  • 1500 Watt Output is enough to power two Primary Sump Pumps simultaneously (5.5 Amps Max each)
  • Can be used as a power inverter for many applications requiring backup power