10 Best Stepper Motor For 3d Printer of February 2026

• 5pcs/ Package
• 59Ncm(83.6oz.in) holding torque
• NEMA 17 bipolar 1.65"x1.65"x1.85" 4-wire
• 1.8 deg. step angle(200 steps/rev)
• Rated current 2.0A & resistance 1.4ohms

STEPPERONLINE

• ★ Latest CNC Shield Expansion Board V3.0 ★-CNC shield board is updated version 3.0, which is suitable for CH340G Shield 3.0 version compatible with for ArduinoIDE, GRBL 0.9.
• ★ Professional 3D printer CNC Kit ★ This is a professional 3d printer DIY kit with multiple types of modules or components you need. It is a great assortment set for starters and professionals.
• ★ Premium Quality ★ Each part of this Logrunner 3d printer conk kit was made of premium material. These components can be used in a wide range of application.
• ★ DRV8825 Stepper Motor Driver with Heat Sinks ★ High quality stepper motor drive with 4 Aluminum Cooler, running within 2.5A current (Maximum), compatible with for ArduinoIDE software and hardware.
• ★ Good after-sales service. We'll respond within 24 hours for any questions.

Longruner

• 5 PCS, High torque Low noise
• Nema 17 stepper motor with step angle 1.8deg
• Holding Torque: 45Ncm(63.74oz.in), 12-24 VDC
• Rated Current/phase: 1.50A & Phase Resistance: 2.3ohms
• Build with 1m Pin Connector

STEPPERONLINE

• TMC2208 is an ultra-quiet two-phase stepper motor drive chip, continuous drive current 1.4A, peak current 2A, voltage range 4.75V-36V, 256 subdivision.
• The flexible microPlyer interpolation unit provides up to 256 subdivisions, allowing perfect sinusoidal control even in systems with limited pulse frequencies; these are also designed because stealthChop2 ultra-quiet technology is widely used in 3D printing.
• Compatible with existing 3D printer electronics, eliminating the expensive costs of redesign. It can replace the original TMC2100 A4988 DRV8825 LV8729, lower heat, especially for 3D printing market.
• With this adapter you can test your SilentStepStick or flash the TMC2208 SilentStepStick with an USB-to-serial converter.
• The adapter comes with stackable headers, so you can use it direct on your 3D printer board. The tester is pre-configured for standalone operation on an USB to serial adapter (VIO-VM jumper closed).

DORHEA

• High Torque: Twotrees stepper motor Adopting high quality motor steel material, is provided with high torque (42Ncm(60oz.in) ), low self-inductance reactance, responsive and can avoid system error.Low loss stators have better high speed performance.
• Low Resistance: Twotrees stepper motor can get a lower resistance value compared to motors of the same thickness and torque. This considerably increases the thermal conductivity of the motor. This effectively reduces the increase in temperature.
• Wide Application: This small stepper motors can be used in various area, such as 3D printer; stage lighting; laser engraving; textile machinery; medical equipment; placement machine; non-standard equipment; automation equipment etc.
• Excellent Service : CE certified：Each nema 17 stepper motor has undergone a rigorous quality control ex works, can carry out a 24-month quality assurance . If need further please fell free contact us, we very happy to assist you.
• What Do You Get: The package includes 1* 38mm Stepper Motor/1pcs 1m 4pins cable and connector (Size: 42mm X 42mm X 38mm/1.65''x1.65''x1.49'' ,NEMA 17 bipolar 4-wire:Black: A+, Green: A-, Red: B+, Blue: B-

Twotrees

• Most Popular Nema 17 Stepper Motor
• Brand STEPPERONLINE
• Holding Torque: 26Ncm(36.8oz.in)
• Nema 17 size 42x42x34mm
• 0.4A with 12V dc voltage
• 1m Cable w/ Connector

STEPPERONLINE

• Apply for 3D printer (like CR-10 Series Z axis or Ender-3 X/Y/Z axis), machinery and equipment.
• 1.8 degree step angle, 0.4N.M holding torque, with 0.8A rated current per phase.
• Motor size: 42 * 42 * 34mm (1.7 * 1.7 * 1.3in)
• Lower noise, strong torque, stable property and high accuracy.
• This item does not include connecting cable.

Aibecy

• High Torque: Usongshine stepper motor Adopting high quality motor steel material, is provided with high torque (42Ncm(60oz.in) ), low self-inductance reactance, responsive and can avoid system error.Low loss stators have better high speed performance.
• Low Resistance: Usongshine stepper motor can get a lower resistance value compared to motors of the same thickness and torque. This considerably increases the thermal conductivity of the motor. This effectively reduces the increase in temperature.
• Wide Application: This small stepper motors can be used in various area, such as 3D printer; stage lighting; laser engraving; textile machinery; medical equipment; placement machine; non-standard equipment; automation equipment etc.
• Excellent Service: CE certified：Each nema 17 stepper motor has undergone a rigorous quality control ex works . If need further please fell free contact us, we very happy to assist you.
• What You Get: The package includes 1* 38mm Stepper Motor/1pcs 1m 4pins cable and connector (Size: 42mm X 42mm X 38mm/1.65''x1.65''x1.49'' ,NEMA 17 bipolar 4-wire:Black: A+, Green: A-, Red: B+, Blue: B-

Usongshine

• [Compatible] 42-34 Stepper motor apply for 3D printer (like CR-10 Series Z axis or Ender-3 X/Y/Z axis), machinery and equipment. 42-40 stepper motor apply for Ender and CR-10 series E aixs.
• [Function]1.8 degree step angle, 0.4N.M holding torque, with 0.8A rated current per phase.
• [Silent] Lower noise, strong torque, stable property and high accuracy.
• [Size] 42-34 motor size: 42 * 42 * 34mm (1.7 * 1.7 * 1.3in); 42-40 motor size:42 * 42 * 40mm.
• [What You Get] The package include 42-40 motor 1pcs and 42-34 motor 3pcs,this item does not include connecting cable.If need further please fell free contact us, we very happy to assist you.

Creality

• HIGH TORQUE: Adopting high quality motor steel material, DROK 3d printer stepper motor kit is provided with high torque (0.46 Nm/ 65 oz-in), low self-inductance reactance, responsive and can avoid system error.
• LOW NOISE: The internal rotor of our anet anet a8 stepper motor kit is made with introduced German craftsmanship and there is rotor rubber covering the rotor, effectively reduce the noise.
• DURABLE & TOUGH: Our mini motor uses high hardness metal, tough and durable. And the matte texture in the side wall can increase friction.
• WIDE APPLICATION: This small motors can be used in various area, such as stage lighting; laser engraving; textile machinery; medical equipment; placement machine; non-standard equipment; 3D printer; automation equipment, and etc..
• WHAT YOU GET: The package includes 1* 42 Stepper Motor.

DROK