10 Best Spindle Sander of August 2025

• Powerful 1/2 HP 3.5 amp motor provides 58 OPM and 2000 RPM
• Features onboard storage for all accessories along with a dust collection port for hooking in a dust extractor
• Attach the dust collector of your choice to the onboard dust port to minimize clean-up
• Backed by a two-year warranty

WEN

• Features 1/2 inch, 3/4 inch, 1 inch, 1-1/2 inch and 2 inch sanding drum sizes and one 4 x 24 inch belt
• Operate with belt speeds up to 1575 FPM and spindle speeds up to 2000 RPM
• The 3.5-amp motor oscillates the belt and spindle 58 times per minute with a 5/8-inch stroke
• Onboard storage maintains organization of all accessories and sandpapers
• Includes a beveling work table, five throat plates, four rubber sanding drums, one belt sanding attachment and six pieces of 80-grit sandpaper (one for each size spindle/belt)

WEN

• Lightweight and portable design allows for easy handheld sanding in hard-to-reach places
• Easily transform your portable handheld unit into a stationary benchtop spindle sander by clamping it to your workbench with the included mounting hardware
• Powerful 5-Amp variable speed motor provides anywhere from 1800 to 3200 rotations and 50 to 90 oscillations per minute with a 1/4-inch stroke
• Features four different sanding spindle diameters: 1/2 inch, 3/4 inch, 1 inch, and 1-1/2 inch spindles
• Includes four 80-grit sanding sleeves, three rubber drums, one non-marring rubber mounting pad, Two clamps, an adjustable Straight-edge guide Plate, an onboard 1-1/2-inch dust port, and a two year warranty

WEN

• 1/2 Horsepower Permanent Magnet Motor, 120-Volt, Single Phase, CSA Certified
• Table Size: 11-1/2-Inch W x 15-Inch L x 1-5/16 H
• Sanding Drum Diameter: 3/4", 1", 1-1/2", 2" and 3"; Sanding Drum Length 4-1/2-Inch
• Sanding Sleeves: 1/2", 3/4", 1", 1-1/2", 2" and 3" (1/2" sleeve fits directly on the spindle)
• Weighs 30-Pound

Shop Fox

• Large cast aluminum table with 0-45 degree tilting front section for flatness, accuracy and strength
• Rotating and vertically oscillating sanding action for the perfect balance between work rate and control
• 5 x sanding sleeves (1/2" - 2" dia) and matching drums provide maximum versatility with intricate, shaped workpieces
• All metal belt sander unit with easy belt change provides maximum workrate with straigh and shaped workpieces
• On-board storage slots keeps accessories with the tool for rapid mode changing and convenience
• Vented throat plates and under table dust channel for optimised dust and chippings extraction prociding a cleaner and safer working environment

Triton

• 80 / 120 / 240 grit assorted oscillating spindle sander sleeves, 6PCS per grit
• 1/2 inch, 3/4 inch,1 inch, 1-1/2 inch, 2 inch and 3 inch sanding sleeves for each grit, 4.5" in length
• Different diameters and grits fitting your task and machine perfectly
• Aluminum Oxide Abrasive providing high performance and durability
• Fitting most Oscillating Sanders in the market: RYOBI, DELTA, GRIZZLY, ENLON, POWERTEC, WEN, Rockwell, Fox, Triton, and more

LotFancy

• Ideal for sanding contours, arcs, curves & other irregular shapes
• Rotating & oscillating action for increased speed, efficiency and a precision finish
• Powerful 3.5A (450W) motor No Load Speed - 2000 RPM Oscillation Speed - 58 OPM
• Includes 6 sanding sleeves with matching rubber drums & table inserts
• On-board storage for all accessories. Sleeve Range - 1/2 - 3 inches

Triton

• [20 Piece Drill Press Kit]: Create holes, smooth out rough edges and cuts, polish, or contour irregular shapes into your projects with the DCT Sanding Drum and Sleeves 20 Piece Kit; Package includes rubber barrel sanding drums (1/2”, 3/4”, 1”, 1-1/2”), abrasive sleeves (fine 120 grit, coarse 80 grit), and a plastic blow-molded carrying case
• [Fits Your Tools]: Drill sanding attachment bit features a 1-inch (2.54 cm) long steel shank that fits your 1/4-inch (.64 cm) tools; Ideal for use with your rotary tools such as drill presses, spindle sanders, hand drills, or flexible shaft attachment
• [Varying Sizes]: Drill press sanding drum kit includes 4 reusable sanding barrel arbor drum sander bit attachments; Drum sanding bit provides a different diameter to meet your needs: 1/2-inch, 3/4-inch, 1-inch, and 1-1/2 inch (1.27 cm, 1.9 cm, 2.54, and 3.8 cm)
• [Replacement Sleeves]: Kit includes 4 replacement sandpaper aluminum oxide bands for each size mandrel for a total of 16 sanding bands; Each size features two 80 and two 120 sandpaper grits to meet your needs; Mandrels fit other brands of sandpaper up to 2.5 inches (6.4 cm) in height
• [Built to Last]: Constructed of rubber grain and stainless steel, the 4 round sanding drum bits are designed for woodworking and metalworking projects; The 2.5-inch (6.4 cm) drill sanding drums expand when they are spinning to secure the grit sleeve on the drum allowing for safer and more effective working conditions

Deadwood Crafted Tools

• VERSATILITY: Table tilts up to 45°.
• LONG LIFE: 1" oscillating action protects wood, and prolongs sleeve life.
• EFFICIENCY: Spindles have threaded ends for fast, easy changes.
• CONVENIENCE: Built-in storage racks keep spindles and table inserts nearby.
• SAFETY: Removable on/off safety switch prevents accidental start-up.

Jet

• Triton's TSPSP650 Portable Oscillating Spindle Sander provides the flexibility of a portable handheld edge sander and the stability and precision of a bench-mounted spindle sander
• The powerful 650W motor delivers a variable speed of 1800-3200rpm, oscillating at 50-90opm, making it an ideal workshop or worksite sander for cabinetry, sign making, sink openings, and general woodworking.
• Featuring a dual-action rotating and vertical oscillating spindle, the TSPSP650 provides controlled, precise, burn-free sanding every time
• Various diameter drums and sanding sleeves (1/2", 3/4", 1 1/32" and 1 1/2") come with the tool, which can be changed quickly and easily tool-free with the quick-change system
• The complete kit also includes the inverted bench-mounting set, dust port adaptor and adjustable edge guide

Triton