10 Best Sovol Sv02 Dual Extruder 3d Printer of December 2025

• The laser engraving head kits enables to engrave metal, wood, acrylic, and others substances. It can also cut wood and acrylic, depending on the wattage.
• It is suitable for Sovol SV01, SV02, Creality Ender 3 V2/ Ender 3 / Ender 3 Pro / Ender 5 / Ender 5 Pro 3D Printer. You may need to print a bracket if you want the laser kit installed on the Ender 3 V2. You can download the bracket file from Sovol official website. This kit does not fits for 3D printers with SKR board.
• Easy to Use: The laser engraving head kits run from the fan port on the machine and are usually quick to assemble.
• Tips - Please do not use without goggles. Never use around flammables and please be careful you don't destroy other things around it.
• Any questions please feel free to contact us. We will provide professional technical support for you.

Sovol

• This BL Touch kits just work for Sovol SV01 3D Printer. Work with any kinds of bed materials, such as glasses, woods, metals, and so on.
• Self-test - The push pin operate two times in a test when the power is on.
• Alarm - The LED light blinks if a problem was found on a self-test or during operation.
• Wiring defect indicator : Blue and Red LED for indicating wiring defects.

Sovol

• EXTRA LARGE - This printer comes with one of the largest build spaces available. 350x350x400mm (13.8” x 13.8” x 15.8") build volume makes SV03 the best large format direct drive printer in the market.
• DIRECT DRIVE - Upgraded direct drive extruder leads to faster retraction with more accurate extrusion, allowing you to not only print with more flexible materials but also have better overall extrusion. WIth Filament Sensor, no worry for long print that will run out your filaments and cause any problems.
• SILENT BOARD & BLTOUCH PREINSTALLED - TMC2208 board has a resolution upwards of 256 individually smaller, high-res steps and thus less noise is generated in the coils of the motor. Auto-leveling SV03 will make adjustments to ensure the bed and nozzle are at an optimum distance throughout the printing, which improves bed adhesion and print quality.
• CARBON CRYSTAL SILICON GLASS BED - This printer comes with a reliable and flat glass bed. Forget about other printers with uneven printing surfaces and warped beds. This glass bed ensures a 100% usable and flat surface for any print from the smallest test file to the largest model. Adjustable belt tensioners make SV03 achieve proper belt tension to get high quality prints.
• MEANWELL POWER SUPPLY - Built-in 350W Meanwell power supply ensures stable and sufficient power, fast heatup for the hotbed and nozzle. It protects SV03 from unexpected power surges. Resume printing function allows you turn off SV03 while printing, and resume your print from last layer anytime later.

Sovol 3D

• Flexible, removable, stick to magnetics very well. High strength and heat resistance. Say goodbye to all those removal tools, spatulas, and knives. Compatible with PLA、PETG、TPU. It can be heated up to 110*C.
• The upper flexible removed build surface designed with model removal in mind. It is replacable, make the whole platform kit lasting long time than PEI coating bed.
• The stainless steel plate with flexibility and tenacity in the middle makes it easier to remove the prints, flex slightly to pop your print right off.
• The lower magnetic base comes with 3M adhesive surface, can fixed on the hot bed. No more tape, no more glue, and release your printing anxiety.
• SIMPLE INSTALLATION - Build surface and the stainless steel plate comes together. Just place them on the magnetic base and place 3M adhesive surface of magnetic base on top of normal build plate.

Sovol

• 100% Creality Original - Recently Creality has 2 kinds of heating block. Golden and Silver ones both are 100% Creality Original. The silver ones work for the same functions as the golden ones.
• Capricorn PTFE tubing - About 14 inch long. Due to its high lubricity and high-temperature resistance, it improves the printing quality and accuracy.
• Pluggable: the heating tube and temperature thermistor that from control box, connect them with terminal housing and pin. Then you could plug the hotend kit, easier to replace hotend kit.
• With more terminal housing and pins as spare parts, in case fail installation and waste .
• MK8 Extruder Hot End kit, white wire was temperature thermistor, braided wire was heating tube 24V40W.

Sovol

• 100% Original Capricorn XS Series tubing.
• Capricorn PTFE is well regarded as the highest quality PTFE tubing in all of 3D printing. The tight tolerances make sure that the filament is lead directly to the hotend with as little room for error as possible between the extruder and the hotend. Capricorn PTFE XS Series is rated for withstanding the highest temperatures in the market which is perfect for printing exotic filaments such as ABS, Nylon, and Polycarbonate.
• PC4-M6 Couplers: thread M6/3mm, inner diameter 4mm, fit for the tube whose outer diameter is 4mm, made of premium copper and plastic, sturdy and durable. PC4-M10 Couplers: thread M10/6mm, inner diameter 4mm, fit for the tube whose outer diameter is 4mm, made of high qulity stainless steel and plastic, high hardness, antioxidtion, anti corrosion. The extruder fittings are PC4-M6 and the hotend fittings are PC4-M10.
• One PTFE cutter with an extra sharp razor is also included to ensure that the PTFE is cut flat on both sides to prevent any malfunctions or heat creep when feeding and retracting.
• Any questions please feel free to contact us at any time. We will reply to you within 24 hours and provide technical support for you.

Sovol

• Compatibility - Ideal for Creality Ender 3/3 Pro / 3 V2, Ender 5/5 Plus / 5 Pro, CR-10, CR-10 V2, CR-10 Max, CR 10, CR- 10 Mini, CR-10S, CR 10S Pro, CR-10 Plus, CR-X, CR 20.
• Upgraded Version Aluminum Blue Hand Twist Leveling Nut - Made of high quality aluminum, it will last longer than the original plastic nut. The torque of the hand-turned nut is great, which makes it easy to fine-tune the hot bed.
• High Quality Silicone Leveling Column - New improved leveling tool for 3D printer hot bed / platform bottom connection,can replace the original spring leveling. This heat and pressure resistant silicone leveling column with an inside diameter of 4mm makes it better to level your 3D printer. The mounts are 6 high (18 mm) and 2 lower (16 mm).
• Easy to use - The silicone buffers are simply installed in place of the original spring and movement is no longer possible, your set levels are retained!
• Package Include - 4 pieces aluminum hand twist leveling nut and 8 pieces silicone leveling column. Any questions and issues please feel free to contact us. We will provide technical support and respond to you within 24 hours.

Sovol

• The gray metal extruder is an original upgrade replacement part for Ender 3, Ender 3 Pro,Ender 5,CR-10, CR-10S, CR-10 S4, CR-10 S5, CR-10 Mini, CR-10S, CR-10 Plus.
• Works better than original plastic stock extruder, make loading filament much easier. Even smoother than the red metal extruder.
• Compatible with PLA/ABS/Wood/TPU/PTEG, 40 Teeth drive gear feeds the 1.75mm filament very smoothy.
• Easy to Install. The extruder diy kit comes with a instruction on how to put it together, which makes it more easy to install.
• 100% brand new and original Creality exturder. If you have any question, please feel free to contact us.

Sovol

• Bundle includes Sovol SV02 3D Printer with All-Metal Dual Extruder, Silent Mainboards TMC2208 Drive, Meanwell Power Supply, Tempered Glass Bed & 4.3 inch Touchscreen, 240 x 280 x 300 mm + Sovol 3D Upgraded 4pcs Blue Aluminum Hand Twist Leveling Nut for SV01, SV02, Ender 3/3 Pro, Ender 5/5 Plus/Pro, CR-10, CR10S/10S Pro, CR 20 3D Printer

Sovol

• 【95% Pre-assembled with Upgraded 2 in 1 Out Hotend】 With a full-metal body, stable and durable. 95% preassembled already, just need to install the gantry, filament holder and the touchscreen effortlessly and get ready within 5~10 minutes. Support two-color printing, switch between two filaments when printing, and extrude through a nozzle. Provides high speed and stable print quality. Larger Build volume (mm) 280 x 240 x 300 (one color), 240 x 220 x 300 (two colors).
• 【External Laser Engraving Module】 Sovol SV01/SV02 3D printer can be used with laser kits (not included) to expand the laser engraving function. Please purchase it according to your needs. Supports engraving with a wide variety of materials like wood, plastic, leather, PVC, paper, resin, etc.
• 【Silent Motherboard TMC2208 & Meanwell Power Supply】 Works more quietly, provides excellent stability and protection for SV02. Marlin 2.0 firmware and bootloader preinstalled. With safety warning system of Thermal Runaway Protection, against lose control of temperature. A stable and sufficient power supply protects your printer from unexpected voltage peaks. Safer and more reliable.
• 【4.3 '' Color Touchscreen】 With an intuitive and responsive interface that allows you to change and monitor relevant settings for direct control throughout the printing process.
• 【More Charactoristics】 Removable glass plate, resume printing function, dual Z-axis design, support Bl-Touch add-on, support TF card and USB online printing. Any questions or issues please feel free to contact us. We will provide technical support for you and reply within 24 hours.

Sovol