10 Best Small Drill Press of December 2025

• Includes: drill press, class II 1mW laser, 1/2" keyed chuck & key, tools for assembly
• Adjust between five speeds from 600 to 3100 RPM
• Spindle travel of 2-1/2” with easy to read, locking linear depth stop for accurate and repeatable drilling operations
• Durable 3.2-amp motor provides ample torque and power
• 7-5/8 x 7-5/8" cast iron worktable features rack & pinion height adjustment and bevels up to 45 degrees left & right

WEN

• Perfect for straight or angled drilling, drilling on the edge of a board or on round stock
• Attaches to all 3/8" And 1/2" Power drills and it also includes a 3/8" Capacity chuck with key
• Angle cuts of 45 Degree to 90 degrees, with a built in angle read out in the all metal base
• Centering channels built into the bottom of the base, to accommodate drilling any round stock up to 3 inches in diameter
• Adjustable depth stop and spring action control of the head

Milescraft

• Infinitely variable speed ranges from 580-3200 RPMS. Mechanical variable speed delivers equal torque throughout the range. LED read out displays speed.
• Spindle Travel of 3-1/8" with easy to read, locking linear depth stop for accurate and repeatable drilling operations. Front to the back of the motor is 22 inches
• Quill diameter of 2.17 inches. Durable 2/3hp induction motor develops ample torque and power. Motor: 120 V, 60 Hz. Laser Module: Class III
• 9-1/2 x 9-1/2" cast iron worktable features rack & pinion height adjustment and bevels up to 45 Degree left & right. Width with the handles: 14-1/2"
• Includes drill press, mechanical variable speed, laser, table roller extension, 5/8" keyed chuck & key, tools for assembly.Drill press Height from the Floor to the top: 37 inch

WEN

• ★-High quality, 480 watt motor construction adopts imported bearings, high temperature and full copper wire processing, shell adopts nylon plastic processing
• ★-Drilling diameter: 1-10mm, The spindle is about 110MM away from the drill bit center, Max Spindle travle: 40mm; NO-load speed：I: 0-5000r/min, II:0-11000r/min; Drill capacity: Woods:φ25mm, Iron：φ7mm
• ★-High-power, high-power 480W miniature portable bench drill Precision drilling machine motor copper
• ★-The motor has increased power, which is to increase the life of the motor.
• ★-Suitable for drilling, expanding, and reaming operations on metals and other materials. It can be widely used in single-piece or mass-produced instrument industry, machinery manufacturing and repair parts.

SHZICMY

• Slotted base for easy installation and positioning
• Textured jaws for secure gripping
• 4.5 Inch jaw capacity perfect for light duty tasks
• Lightweight and portable
• Crated of forged iron for long-lasting durability

IRWIN

• Ideal for all drilling projects, not just the small ones
• 1-year manufacturer warranty
• Variable speed up to 8,500 RPM
• Measures 6-3/4 inches by 6-3/4 inches; 13.00 pounds
• Easy-to-use tiny benchtop drill press is space-saving and economical

EURO TOOL

• 1/2-inch keyed chuck. Bump-off switch for added safety
• 5 speeds - 570 - 3,050 RPM
• Adjustable depth stop for accurate measurements and repetitive drilling
• 0-45 degree left/right tilting work surface
• Laser X2 2-beam laser for precise hole alignment

Skil

• Features a 2.3A induction motor, an 8-inch swing, and a 2-inch spindle travel
• Includes a 1/2-inch keyed chuck and onboard key storage
• Operates at 5 different speeds: 750, 1100, 1500, 2100, or 3200 RPM
• Sturdy cast iron head, table, and base for precise drilling operation
• 6.5 by 6.5 inch height adjustable worktable bevels up to 45 degrees in each direction

WEN

• Quiet, precise and vibration-free for fatigue free use
• Low weight and slim design, without ever compromising performance
• High quality precision tools

Proxxon

• Includes a 1/2-inch keyed chuck and onboard key storage
• Operates at 5 different speeds: 740, 1100, 1530, 2100, 3140 RPM
• Spindle travels up to 2 inches with easy to read, locking linear depth stops for accurate and repeatable drilling operations.Cord Length (ft.):6
• Durable 1/3 HP induction motor develops ample torque and power
• 6-1/2 x 6-1/2" worktable is height adjustable and bevels up to 45 degrees left & right
• Swing: 8 inch. Motor: 120V, 60Hz. Horsepower: 1/3 HP.

WEN