10 Best Sliding Miter Saw of December 2025

• Your purchase includes: 1 CDEWALT DWS779 sliding compound cord miter saw, 12-inch, carbide blade, 1 blade wrench
• Tool dimensions: 17” H x 24.75” L. Tool weight: 56 lbs. Maximum cutting thickness: 6.75 inch
• Other specifications: 15 Amps, 12” blade diameter, 5/8” or 1” Arbor size. 3800 RPM motor. Type of milter saw: Slide
• Exclusive back fence design cuts up to 2x14 dimensional lumber at 90 degree and 2x12 at 45 degree. Miter saw does not come with LED (sold separately) or laser cutting guide
• Super-efficient dust collection system captures over 75 percent of dust generated
• Backed by DEWALT'S 3 year limited warranty

DEWALT

• Part of the V20 cordless system
• 7-1/4in. V20 20V max* miter saw has a powerful 3, 800 RPM motor for cutting 2x dimensional lumber, hardwoods, baseboard and trim with ease
• Slide capacity allows for 8 in. Cross cut at 90 degrees and 5.5 in. Cross cut at 45 degrees
• Capacity to cut 3-5/8 in. Nested Crown and 3-1/2 in. Baseboard vertically
• Lightweight design at 21.8 lbs. With side carry handles make this unit extremely portable
• 3 Year Limited Warranty, refer to "Warranty & Support" section below for full details

Craftsman

• New precise miter system
• Handle design for added portability
• Integrated XPS cross cut positioning system provides adjustment-free cut line indication
• Powerful 15 amp, 3800 rpm motor delivers extended power and durability
• Exclusive back fence design cuts up to 2X14 dimensional lumber at 90-degrees, 2 by 12 at 45 degrees
• Adjustable stainless steel miter detent plate with 10 positive stops improves productivity, ensures accuracy
• Innovative gearbox and belt drive design increases vertical cutting capacity
• Super-efficient dust collection system captures over 75% of dust generated

DEWALT

• ➤DOUBLE BEVEL CUTTING & DOUBLE LINEAR SLIDING RAIL DESIGN - Double bevel cutting design allows you to adjust the cutting angle to left 45°and right 45°to meet different cutting needs. Double linear sliding rail Design provide guarantee for more smooth, steady and precise cutting works.
• ➤3800 RPM POWER MOTOR & LASER MARKER- With 15 AMP MOTOR and full-size performance at 3800 RPM, TACKLIFE sliding compound miter saw provides powerful, smoother, faster cutting. Integrated laser controlled by single switch, marking the cutting line, helping sawing long work pieces.
• ➤UNIQUE HANDLE & 90% DUST COLLECTION- The equipment of soft-grip cutting handle and base angle change handle for added comfort. 35 mm dust port allows you to connect a vacuum cleaner to achieve the ideal 100% dust collection, keeping the environment clean and for wide vision.
• ➤40 T BLADE & EXTENSIBLE TABLE - The 305mm 40-tooth TCT strong blade is ideal for cutting wood, plastic tubing and soft metal. Equipped with allen wrench, the blade can be easily changed. The wide worktable provides better material support during operation, and the pair clamping system ensures the safety of the workpiece, allowing for more secure cutting operations.
• ➤RICH ACCESSORIES - TACKLIFE PMS03A Miter saw, 40 Tooth TCT Blade, 1 Set Carbon Brush, 2 Extension Rods, Allen Wrenches, Dust Bag, 1 Set Clamping System, User Manual, 24 Months Card. Email: [email protected]

TACKLIFE

• Axial glide system: The patented glide system allows wider cross cuts and better alignment while also being compact; This saves you 12 inch of valuable work space; Bosch glide miter saw also offers unmatched smoothness of cut
• Capacity: Expanded cutting capacity 14 inch horizontal capacity nominal 6 1/2 inch vertical capacity against the fence base 6 1/2 inch crown capacity against the fence 45 spring
• Adjustable: The GCM12SD miter saw provides easy adjustments with a large easy to read uniform bevel and stainless steel miter scales with marked detentes and roof pitch angles; Bevel detents: 0, 33.9 degree, 45 degree left/right for accurate cuts; Category best 90 percentage dust collection optimized for cutting 2x material with a vacuum
• Precision: Square lock quick release fences lock fence 90 degree to the table and requires no adjustment, 1 touch lock/unlock to slide fence for added support
• Ease of use: Upfront bevel controls all metal bevel lock lever and range selector located upfront for quick and easy bevel settings without reaching behind the saw

BOSCH

• THE SPECIFICATIONS ➤12 Inches, 3800RPM, plus a 15Amp powerful motor. Whether you are a DIY user or a user with higher requirements for woodworking, RMS01A miter saw could meet your needs for woodworking.
• SLIDING RAIL SYSTEM ➤The unique Double linear sliding rail system allows wider crosscuts and better alignment while also being compact. The maximum cutting width can reach 13 inches. The maximum cutting depth can reach 4.12 inches.
• DOUBLE-BEVEL CUTTING ➤Double bevel cutting design allows you to adjust the head to left 45°and right 45°to meet different cutting. The saw blade can also be tilted 45° left and right to meet the needs of cutting wood at different angles.
• VERSATILE SAW ➤Pull out the extendable workbench, turn on the laser above the machine, place the long wood, hold the handle with your right hand, and use the slide rail to cut the wood by the 40T sharp saw blade, you will get incredible results.
• EXCLUSIVE AFTER-SALES SERVICE ➤If there is any problem on our product, don’t be worried, please contact our REYLEO official after-sales service via Amazon, we will answer in 24 hours. We provide a 2-year warranty for you. We will spare no effort to deal with the problem.

REYLEO

• Powerful 15 Amp, 3,800 rpm motor delivers extended power and durability
• Exclusive Back Fence Design cuts up to 2x16 dimensional lumber at 90° and 2x12 at 45°
• Super efficient dust collection system captures over 75% of dust generated.
• Wide adjustable infeed and outfeed work supports provide up to 8' of material support
• Easily adjustable mounting rails adapt to nearly any miter saw
• Wide rubber grip wheels provide easy jobsite mobility

DEWALT

• Power and durability: 15 amp, 4,000 Rpm motor
• Miter detent plate improves productivity and ensures cutting accuracy: Adjustable stainless steel miter detent plate with 14 positive stops
• Miter dentent override that allows you to override the miter stops and adjust to the desired setting without the saw slipping into the Miter detents. Arbor size is 5/8 inches
• Tall sliding fences that support crown molding up to 5 1/4 inch nested and base molding up to 6 1/2 inch vertically against the fence while easily sliding out of the way for bevel cuts
• Cross cut capacity up to 2x8 inch dimensional lumber at 90° and a 2x6 inch dimensional lumber at 45°
• Machined base fence support maintains fence perpendicularity with blade for cutting accuracy
• Bevels to the left up to 48° and to the right up to 3°, with positive stops at 0°, 45° and 33.9° for cutting crown molding laying flat with 4 hardened steel bevel stops at 0°, 33.9°, 45° and 48° that delivers versatility at most common bevel angles
• Includes a carbide blade, dust bag, blade wrench, vertical clamp and comfortable side handles in the base

DEWALT

• Lightweight unit is easy to move from room to room or even from job to job
• Table extensions help support long work pieces
• Spindle lock holds spindle securely while bade nut is loosened and removed
• Bevels left - from 0°- 45°, cuts Nominal 2X12 at full bevel
• Improved laser – with on/off switch. Makes aligning blade to work piece more convenient and precise cuts

Delta

• ▲【Double-Bevel Cutting & Max Cutting Depth】Double-bevel design allows 45° cuts(L)of up to 2.36*12.99 inche and 45 °cuts(R) of up to 1.38*12.99 inche; It can meet bevel cutting needs by swing the saw compared with a single bevel miter saw
• ▲【Powerful Motor & Multipurpose Cutting】Powerful 15Amp/1700W with 3800rpm smoothly cutting through multiple materials such as wood, plastics, aluminum alloy and metal plate
• ▲【Sharp 40 Tooth TCT Blade】Chop saw comes with an ultra high grade 40 tooth tungsten carbide tipped blade, offering more possibilities for cutting various materials and allowing smoothly grooving and trenching
• ▲【Ergonomic & Double Linear Sliding Rail Design】D-handle design creates more comfortable and easy to use for users; Double linear sliding rail Design provide guarantee for more smooth, steady and precise cutting works
• ▲【Laser Marker & Extensible Table】Laser marker accurately track the real-time position for making the cutting more accurate and professional; Extensible table with vice clamping provide better support and balance to prevent material from warping

TACKLIFE