9 Best Rotating Nato Handle of December 2025

• 【Rubberized Aluminum Alloy Handle】Nitze PA29C side handle with NATO clamp is made of aluminum alloy and covered with rubber for more comfortable grip and durability.
• 【Ergonomic Design】Ergonomic design handle is comfortable to hold, and it is not easy to get tired for long-term shooting.
• 【For Left or Right Hand】The NATO clamp connecting section can be mounted to both sides by two M4 Screws. You can use it as a left side handle or right side handle.
• 【Up and Down Adjustable】The height of the connection part can be adjusted within 28 mm.
• 【Mounting Points】One built-in cold shoe, six 1/4” threaded holes and one 3/8” ARRI locating holes on the top of the side handle for accessories expansion. The strap slots can be used to mount Nitze N58-R2 hand strap.

Nitze

• 【Form-fitting Design】Fits the new BlackMagic Pocket Camera 4K /6K Version.All buttons on the camera are barrier-free to ensure easy access to camera controls. The battery and SD card are also unimpeded.
• 【Multiple Mounting Interfaces Design】The cage is equipped with multiple 1/4'' and 3/8'' screw holes .Built-in Cold Shoe mount .that can be used to install monitors, microphones, flash and other accessories.
• 【Rotating NATO Handle 】NATO Handle has the function of quick loading and unloading. It can be rotated 360 degrees to find the balance position/comfortable holding position of the device. Built-in hexagon wrench, easy to access. The handle can be used as a top handle and a side handle.
• 【Double Lock Design】 Securely locked by 1/4" screws on the top and bottom, and with additional positioning pins and rubber pads on the base plate to prevent distortion.
• 【Built-in 3 NATO Rail】This cage features a built-in NATO rail on the top , left and right sides where you can install a NATO handle for handheld shooting.

MAGICRIG

• 【Design】The cage is compatible with Sony Alpha 7SIII / A7SIII. Made of premium aluminium alloy, It allows enables shooting at multi-angles and can be handheld easily.
• 【Double locking】In addition to the 1/4" -20 camera mounting screw, the M2.5 screw is fixed on the belt hole, so it can prevent the camera from deflection during the shooting. The cage also incorporates an anti-twist design, and the cage base is equipped with rubber pad to protect the camera from scratching.
• 【Built-in cold shoe & spanner】This cage kit is equipped with multiple built-in cold shoe mounts which can be used to install microphones, LED lights and magic arms, etc. The nato handle comes with an allen wrench on the side, which attaches via magnet inside the handle.
• 【Multiple mounting points】The magicrig cage kit with abundance of 1/4’’ and 3/8'' mounting points and several ARRI-style mounts for mounting additional accessories, such as ball head, rod clamp, magic arm, etc. The right side of the cage has a built-in NATO rail that can be directly connected to the nato handle.
• 【Handle】The nato handle comes with an allen wrench on the side, you can loosen those screws on the top side and can change nato clamp orientation according to your need. The quick release handle rotates up to 360 degree and secures to cage with nato rail on the top or side.

MAGICRIG

• 【Design 】MagicRig Cage Kit for Blackmagic Design Pocket Cinema Camera 4K & 6K. This cage of anti-twisting and excellent heat dissipation for better shooting without making any damage to your camera.
• 【Perfectly compatible 】Unblocked battery and SD card. Secure tightly via 2 screws on the top and bottom, and there are additional positioning pins and rubber pads on the base plate to prevent twisting.
• 【Rotating NATO Handle 】The nato handle comes with an allen wrench on the side, you can loosen those screws on the top side and can change nato clamp orientation according to your need. The quick release handle rotates up to 360 degree and secures to cage with nato rail on the top or side.
• 【Multiple mounting interfaces】The product is equipped multiple mounting points including arri-type locating holes, 1/4"-20 thread holes, 3/8"-16 thread holes, M4 thread holes, nato rail, cold shoe mount.
• 【 SSD holder 】Two M5 knob screws are used to lock the T5 SSD and its USB-C cable. There are a variety of mounting options to give you more options. The mount can be mounted on the camera mount with two M4 screws or Two 1/4" screws.

MAGICRIG

• 【Compatible with Most Cages 】The rotating NATO handle fits for any camera cage with NATO rail, with 50mm NATO rail.
• 【Handlegrip Length is 150mm】Handlegrip length is 150mm, designed for providing nice grip feeling for you. In addition, At the end of the handlegrip built-in wrench.
• 【Rotating 360° & Adjustable Back and Forth】The handle can be rotated 360 degrees, and fixed to any cage with nato rail on top or side .The handle can be moved back and forth, movable distance is 94mm, That you can find the comfortable holding position of the device.
• 【Multiple Installation Port 】The handle built-in multiple 1/4" , 3/8" and Arri-type threaded holes, allow to mount such as display and magic arm. In addition, built-in 2 cold shoe, to mount microphones, lights and sound receivers.
• 【 with Lightweight NATO Rail】Net weight 19.5g, length 50mm, with detachable Arri locating screw. It can be attached to any cage with two 1/4" holes(the distance between two screws are 27mm) or 3/8" hole or Arri- type hole .

MAGICRIG

• 【Design 】MAGICRIG nato handle is designed to provide a comfortable handheld use for accessory such as microphone, monitor, flash light, video light and magic arm. The handle weight only 185g.
• 【Rotating 360° 】The nato handle comes with an allen wrench on the side, you can loosen those screws on the top side and can change nato clamp orientation according to your need. The quick release handle rotates up to 360 degree and secures to any cage with nato rail on the top or side.
• 【Balance adjustable】Except for sliding it forward and backward on the nato rail to balance the camera's center of gravity, you can also loosen the screw on the other side and change the front and back direction as needed to find a balanced position.
• 【Built-in cold shoe & spanner】This nato handle equipped with two built-in shoe mounts for microphone, LED lights, and magic arm etc. The nato handle comes with an allen wrench on the side, which attaches via magnet inside the handle.
• 【Mounting points】The magicrig nato handle with abundance of 1/4’’ and 3/8'' mounting points and five arri-type accessory mount for mounting additional accessories, such as ball head,rod clamp, magic arm, etc.

MAGICRIG

• Universal the Left and Right Hand - This Rotating NATO Side Handle 3847 fits the left or right hand with its ergonomic design. Included a NATO rail and a built-in spanner to mount the handle onto cages without NATO rail on both sides
• One-Press Quickly Rotate and Lock - Rotating Side Handgrip 3847 is designed to achieve unlimited rotating in seconds. For different filming angles, you can press the unlock button on the side for easy 360° rotation and release it for automatic locking
• Only 205g but Max Load 5kg - Side Handgrip 3847 is made of magnesium alloy and carbon fiber, that's why it is lightweight but strong. It is 105g lighter than SmallRig Side Handle 3260, easy to use on various photography scenarios
• Multiple Mounting Points - It comes with different mounting points on the top. Such as a cold shoe mount for Microphone 3468, LED light 3405. For ARRI 3/8"-16 locating hole for Monitor Mount 2903B. Three 1/4"-20 threaded holes for Magic Arm 2070B, Ball Head Magic Arm 3873. And a strap hole for Hand Strap 3848 for more stability
• Note - When using side handle 3847 on both sides of the camera cage at the same time, please do not press the buttons simultaneously for rotating to prevent from camera falling

SMALLRIG

• 【QR NATO HANDLE】SmallRig Nato Handle grip is designed to provide a comfortable handheld use for accessory such as monitor, microphone, light and magic arm. It is compatible with SmallRig Camera Cage such as SmallRig2203, SmallRig2254, SmallRig1889
• 【ROTATING 360° AND ANTI-OFF DESIGN】The quick release handle rotates up to 360 degree and secures to any cage with nato rail on the top or side. The twist handle is equipped with two cold shoes. One of them in front features an anti-off button to protect your setup from slipping off
• 【BUILT-IN SPANNER】The top handle comes with an allen wrench on the side, which attaches via magnet inside the handle. You can use it for different purposes, you can loosen those screws on the other side and can change front to back orientation according to your need. So that makes it very easy to use for balancing the camera for handheld use
• 【ACCESSORY THREADS】The handle features multiple 1/4"-20 and locating holes for ARRI for accessory attachment, such as SmallRig Monitor Mount BSE2294, BSE2346 and Ballhead 1135
• 【COMFORTABLE GRIP】SmallRig HTN2362 integrates with natural rosewood without any painting, which could make it more comfortable to use and provide a comfortable handheld shooting for cameramen

SMALLRIG

• 【CHANGE ORIENTATION IN SECONDS】The SmallRig New Design Nato Handle 3260 is born to achieve changing the orientation in seconds. For different filming angles, you can press the unlock button on the side for easy 360-degree rotation and release it for automatic locking.
• 【WIDE APPLICTION】The quick nato handle comes with a nato rail, and it could be quickly mounted onto the side of the cage via a NATO clamp.
• 【COMFORTABLE TO USE】Ergonomically designed with a comfortable silicone surface texture, the handle is anti-slip and sweat-proof.
• 【MOUNTING POINTS】The handle comes with 1/4"-20 & 3/8"-16 threaded holes and a cold shoe for easy attachment of accessories. With built-in hand strap holes, it works with Hand Strap PAC2456 (not included) and provides more options to further enhance the user's grip comfort.
• 【NOTE】1) The product is ONLY for the left hand. 2) It is a normal mechanical movement if the handle gets stuck and makes clicking sounds. 3) The maximum bearing capacity of 5kg.

SMALLRIG