10 Best Resistors For Guitar Pedals of December 2025

• Guitar pedal enclosure unfinished means it need you to DIY the holes by yourself.
• NOTE: In order to let buyers experience the fun of assembling, It need you to assemble it by yourselves. If you'e not 100% sure you could make it assembled successfully, please purchase prototypes directly.
• Making the DIY kits needs basic knowledge of circuit and welding experience, ability to understand circuit diagram and schematic diagram.
• Beginners might not be 100% successful to make it, please select the DIY kits with reasonable difficulty level based on your own ability.
• Enclosure model: 1590B (112(L)X60(W)X32(H)mm/ 4.4"*2.4"*1.3")

TTONE

• One-Stop Gig Solution for Metalheads with Main Effects needed
• Analog Hi-Gain Distortion with 3-Band EQ and Smart Noise Gate
• A Pre-Gain Boost can Push Up more Gain and Volume of the Distortion, perfect for some Heavy Riffs or Loud Solos
• BBD-style Analog-sounding Chorus Brings Classic Ambient Tone
• 500ms Analog-Voicing Delay for adding Ambience on different Tone Demands

SONICAKE

• 1.This valuable classical model of Delay pedal uses a hand-polished aluminum box
• 2.This Kit is super easy to build and very rewarding
• 3.The PCB is designed to fit perfectly inside the pre drilled enclosure(included)
• 4.Our PCB is a double-side welding high-quality and professionally designed and produced PCB board
• 5.Dimensions 112 x 61 x 31mm

TTONE

• The Contortionist II kit is an all analog, high octane fuzz box
• It produces fuzz with layered octave overtones similar to those produced by an electronic-bow
• The frequency multiplier circuitry creates harmonics that swell and recede depending on gain setting, pick attack, neck position and pickup.
• This is a high gain circuit that can put out up to 2 volts and will provide ample amounts of sustain
• The Contortionist II has all the features of the original Contortionist with an added tone control for a wider range of sounds, and an LED that lights up when the unit is activated.

Mod Kits

• Passive Volume Control/Expression Control 2 functions in 1 Pedal
• Automatically Detect the Functionality (Volume or EXP Control)
• Working with Guiar, Bass, Keyboard, Synthesizer, Workstation, Controller, etc.
• Working without Battery or Pedal Power Supply
• Lightweight & Comact Design for easily Taking it Anywhere

SONICAKE

• This pedal will need a compatible DC 9V power supply and any associated cable (center tip, negative) in order to function. Note that the power supply and any associated cable are not included. Please ignore the redundant battery related notice tag on the item which was included in error. This unit does not accept batteries
• Mini sized footprint phaser pedal (About 92*42*33mm), easy to carry, affordable way you can try a new sound effect, or tweak it.
• Entry level pedal with basic functionality, true-bypass switching, low noise floor, control/speed knobs, LED light, full metal aluminum case, simple setting to work.
• Classic phase effect. It's identical in tone and response and where the eqing is centered. If you like light, warm phase, this is the one for you. It does not add a high frequency sheen either, so you can actually use it at the same time you're working a wah-wah pedal.
• Package includes: 1 piece pedal only, no any adapter or battery, you need extra adapter to use it

Musiclily

• 【Good Quality】Single linear rotary taper poteniometer, 3 terminals, single linear, with standard WH148 knob.
• 【Kit contains】B5K-B100K Ohm( The set includes 5 Values Resistor, 4pcs for each Value ) knurled shaft linear rotary taper potentiometer with nuts,washers and caps for Arduino.
• 【Total length】 31 mm / 1.2"
• 【Type and Material】single linear, metal and carbon film

Seloky

• 1.Use this kit build your own high quality Boost pedal.
• 2.The PCB board is well marked and easy Assemble
• 3.Use Hand Made 1590B Diecast Aluminium Casing
• 4.Factory direct sales, quality assurance, low price
• 5.Size: 112mm x 60mm x 32mm / 4.4"*2.36"*1.26"

TTONE

• Bundle Includes 2 Patch Cables!
• Hand made in the U.S.A.
• High grade film capacitors and resistors picked for their superior sound and response
• Completely true bypass
• Battery connection and 9v power jack (barrel plug like Boss)

Wampler

• 1.Very easy to assemble.
• 2.the Klons Overdrive PCB is designed to fit perfectly inside 1590BB enclosure
• 3.Our PCB is a double-side welding high-quality and professionally designed and produced PCB board
• 4.The high quality classical Overdrive Pedal.
• 5.Can be run from 9V mains adaptor only and Low price too

LANDTONE