9 Best Remote Sensor Monitor And Controller of October 2025

• Fully customizable ppm deadband and CO2 set point allow flexibility in programming
• Trend chart records CO2 levels per minute, hour, day and week for accurate analysis of CO2 distribution
• Adjustable trend chart zoom levels let you trace your ppm levels
• Remote CO2 sensor probe w/Photocell & 15' data cable lets you take readings from proper grow room locations
• 2-channel low drift ndir sensor precisely reads CO2 ppm levels

Autopilot

• NDIR CO2 SENSOR: 2-channel low drift ndir CO2 sensor precisely reads CO2 ppm levels. With 6.56ft long sensor lets you quickly take readings from proper grow room locations
• PROGRAMMABLE FUNCTION: 6 preset function of different setting ppm for specific period of time is achieved when run in automatic mode; User can set to turn off CO2 at a specified time such as when there is no light. User can also set desired CO2 level for different plants
• EASY TO USE: Directly plug the CO2 generator or regulator in the controller piggyback plug, When the CO2 level is too low, the controller will turn on the CO2 generator or regulator. When the CO2 level is reached, the power is turned off, Save your time and trouble
• SAFE AND RELIABLE DESIGN: 1800W allowing users to connect the controller to a higher-power appliance; UL-Listed components ensure the stable quality of the whole product's safety
• WIDELY USED: The CO2 Controller & Monitor can be used in greenhouse, growrooms, farm, hydroponic rooms and other places where elevated CO2 levels are used to maximize plant growth

briidea

• EPEVER 40A MPPT Solar Charge Controller + MT50 Remote Meter + Temp Sensor Cable RTS300R47K3.81A . 40Amp Controller 12V/24V Auto Work , Max. PV input power:520W @12V battery or 1040W @24V battery. Max PV 100V. Common Negative grounding , Compatible with lead-acid and lithium-ion batteries.
• 40Amp MPPT Charge Controller Tracking efficiency : ≥99.5%, Max. conversion efficiency 98% ,12V/24V Automatic Work System Voltage Recognition Auto-saving function: two voltage disconnect levels ,Charging power and current limitation function.
• Support Lead-acid: Sealed (default)/ Gel/ AGM/ Flooded / User (9～17V@12V; 18～34V@ 24V) & Lithium: LiFePO4 (4s/12V; 8s/24V), Li (NiCoMn)O2 (3s/12V; 6s/24V), User (9～34V) & User-defined.Battery temperature compensation function（only for Lead-acid battery) , Overheating power reduction function
• MT50 Remote Meter Automatic identify the controller, and display relevant parameter data , Diversified load control modes : Manual Control, Light ON/OFF, Light ON+ Timer, Time Control . RTS Temp sensor acquisition of battery(or controller) temperature for undertaking temperature compensation of control parameters,
• 2022 Upgraded version support choose Lithium types by controller buttons directly . You could also contact with vendor(Goland Century) services to get program firmware upgrade file , then you could set old version controller's Lithium types by controller buttons too . More details parameters setting by EPEVER accessories ,such as MT50 ,eBox-WiFi-01 , eBox-BLE-01,elog01 ,PC software. Any questions please contact our USA Tech-support team .

EPEVER

• Wired infrared sensor Bar for Nintendo Wii and Wii U consoles Includes stand with adhesive for easy attachment to TV, monitor or any smooth surface. Wii system is not included.
• More than 7ft cable ensures convenient placement of sensor Bar, sensor Bar length: 9.4 inches. Perfect replacement or extra sensor for Wii or Wii U.
• Compatible with all Wii controllers including Wii U controllers, motion plus controllers and other Wii controller addons.
• It works Just like the original sensor bar with simple plug and play installation and does not require batteries or any power adapter.
• Please feel free to contact us if you have any questions.

JINHEZO

• 👍👍【Android & IOS WIFI App】WIFI APP - WIFI smart controller supports both IOS & Android. WIFI connection supports 2.4GHz Wi-Fi band with free “InkbirdSmart“APP to control the temperature remotely.
• 👍👍【Dual Relay Output】Dual relay - able to power refrigeration and heating equipment as conditions change.
• 👍👍【High/Low Temperature Alarm】 Set High/Low temperature alarm when the temperature is over or under preset temperature or the sensor experiences a malfunction.
• 👍👍【Convenient Design】Plug-n-play, easy to use. Supports ℃/℉reading and Temperature calibration.
• 👍👍【1100W Max Outpout】Maximum output load: 1100W(110V).【Safety】Maximum output load: 1100W(110V). Customize temperature and compressor delay, protecting your refrigeration/heating equipment.

Inkbird

• Compatible with Renogy Adventurer ,Wanderer, Rover and Rover Elite series controllers.
• Non-polarized wires are insulated and protected from harsh environments.
• Wide Temperature Compensation Range up to 176℉.
• ROHS compliance and rated for outdoor use.
• Cable length: 118 in.

Renogy

• Wired infrared sensor bar compatible with Wii and Wii U consoles
• Includes stand with adhesive for easy attachment to tv, monitor or any smooth surface. Wii System Is Not Included
• More than 7ft cable ensures convenient placement of sensor bar, Sensor Bar Length: 9.4 inches
• Perfect replacement or extra sensor for Wii or Wii U
• Easy to set up and start playing out of the box. Color: Silver / Black

KIMILAR

• FEATURES: low drift NDIR CO2 sensor, Auto day/night detection, big LCD display with real time value, Monitoring & Controlling CO2 value in Greenhouse or residential, programmable CO2 control value & zone value, advance human and plant mode available
• APPLICATION: 1. Greenhouse - highly accurate digital CO2 controller measures the carbon dioxide level in the grow room and automatically turns off the CO2 device to accurately keep the carbon dioxide PPM at the desired level. 2. Home/Office use - measures the carbon dioxide level in close space and automatically turns on/off ventillation system to get good air quality
• SIZE: LCD 47 x 104 mm; Meter 158 x 106 x 50 mm; Sensor 124 x 33 x 26 mm with 4.5 meter long cable
• CHART DISPLAY: adjustable time scale (week/day/hour/min/auto), Auto Max. /Min. Recall, Target zone indicator
• ACCURACY LEVEL: CO2 below 3000ppm ±50ppm or ±5% of reading, whichever is greater / CO2 above 3000ppm ±7% of reading

TEKCOPLUS

• 🤓 SMARTEN EXISTING GARAGES: Universal adapter connects to existing openers & connects to wireless b/g/n so you can control from anywhere wirelessly.
• 🔈 WORKS WITH ALEXA, GOOGLE HOME, IPHONE, SIRI, ANDROID: Use any device including voice assistants, like Alexa, Ok Google, Siri, or even on smart watches.
• 🚘🚘 MULTI-CAR GARAGES: Have 1, 2, or 3+ garage doors? Our device works with any number of garage stalls - each garage door will require its own opener to control it.
• 🏡❓👍 WORKS ON MOST OPENERS (adapter maybe required): Not sure if your openers compatible? It likely is! If it isn't we now have an adapter that expands compatibility - let us know if you need an adapter📩
• 🤑NO MONTHLY FEES: Enjoy unlimited access to our mobile app along with Siri, Alexa, OK Google, and scheduling at NO EXTRA COST!

eKyro