9 Best Red Dot Mounts of December 2025

• Compatible with Glock vortex venom viper burris fastfire ade *NOT FIT Counterfeit sights
• Ultra Low Profile and lightweight, Easy to install.One Piece Design for a Secure Zero Hold.
• 30MOA design, Solved some red dots don't have enough elevation adjustment to put the sight down on pistol mount.
• Precision CNC Machined from 7075-T6 aerospace grade Aluminum with Black anodized finish.
• 100% MONEY-BACK warranty within 30 days of purchase * NO QUESTIONS ASKED. 7X24 quick response technical support.LIFETIME WARRANTY

DPP Titanium

• CHOOSE YOUR MOUNT - .83" Riser for Absolute Cowitness, and 1.0" Riser for Lower 1/3 Cowitness
• CANTILEVER DESIGN - The angled, single-rail mount keeps the red dot forward for fast target acquisition
• LIGHT WEIGHT - At only 1.1 oz, this is one of the lightest red dot risers out there!
• INSIDE THE BOX - Includes Allen wrench for tightening the riser to your platform
• LIFETIME WARRANTY - AT3 Tactical stands behind its products. If you experience an issue, we will make it right.

AT3 Tactical

• 3-MOA Red-Dot reticle for fast acquisition, 23mm x 17mm multi-coated objective lens, Digital push-button brightness controls, 10 brightness settings
• Compatible with optic-ready pistols, Common lug and bolt pattern for maximum compatibility (Vortex, EOtech, Docter, Insight, Meopta, etc.)
• Ultra-lightweight (just over 1 oz.), CNC-machined from aircraft-grade aluminum
• Unlimited eye relief, Auto-off feature preserves battery life, Water-resistant (sealed o-ring design)
• Picatinny / Weaver rail mount included

TRUGLO

• TOPS (Truglo Optic Plate System) uses interchangeable base plates to fit a wide variety of micro dot optics from popular manufacturers
• Mounts an additional optic for backup or close-range use
• Mounts to firearms with Picatinny or Weaver-style rails
• Ambidextrous design for versatile placement
• Rated for all calibers up to 45-70 Government

TRUGLO

• Pistol mount plate fits GLOCK 17 19 22 23 26 27 34.
• Fits Vortex Viper/Venom micro red dot sight
• Fits Ade Advanced Optics rd3-001, rd3-02, rd3-009, rd3-006a, fits Sightmark mini shot reflex sight
• Fits Burris Fastfire micro red dot sight(Notes: the screws included in the package are not long enough for some Burris red dot sights, you can use the screws in the red dot)
• WO WOLTIS,Caution: NOT fit RMR, RMS, Doctor.

WOLTIS LONJN

• Offers three height options(.75 inch, .83 inch and 1 inch), Lower 1/3 co-witness /Absolute co-witness with iron sight when you install it on your red dot sight.
• Easy to adjust height. Can be adjusted incrementally via two locking screws from 0.75 of rise up to 1 inches of rise, measured from rail surface to rail surface.
• Riser mount for red dot scope with Picatinny or Weaver rail.
• Made of high-quality aircraft aluminum, resistant to high and low temperature, anti-corrosion, anti-rust, sturdy & light weight construction.
• Item Size: 1.96"L x 1.54''W; Item Weight: 2oz.

Feyachi

• Note:Compatible with RMR and SRO red dot.Not available for RMRcc
• Length(mm):45 Width(mm):32 Height(mm):11；Weight(g):30
• Humid environment may cause rust, please keep it properly. If there is a problem of rust after receiving the product, please contact us to replace it in time.
• Precision CNC Machined from 6061-T6 Aircraft Grade Aluminum with Weight Reducing Lightening Cuts, and Finished in a Matte Black Anodize
• Also suitable for RMR SRO similar red dot，But I hope you pay attention to the size of red dot.

ohhunt

• 1.【PROFESSIONAL AVIATION ALUMINUM OPTIC MOUNT】 Micro Red Dot Sight Mount Includes 1 Base, 2 Screws , 1 Wrenches.
• 2.【PREMIUM CRAFT & MATERIAL】Micro Red Dot Sight Mount, Rugged 7075 Aluminum Matte Hard Coat Anodized , Offer Durable Safe Performance In Using, Lightweight & Solid-Style. (Weights Only 2.61 oz. )
• 3.【WIDELY USED】 Micro Mount Designed for T1 / T2 / H1 / H2 / RomeO / CompM5 and Other Pptics With Micro Footprint, The Base Has a Universal Standard Picatinny Rail Seat, You Can Directly Fix it on the 20mm Picatinny Rail.
• 4. Any Issue, Just Contact us Through Your Buyer Center to Enjoy an Efficient Solution. We Stand by the Quality of our Product.

LThyzszb

• For 45 degree offset mounting of a micro red dot sight to your picatinny mounting platform
• Compatible with Vortex Venom/Viper, Burriss Fastfire 2/3, TRUGLO TRU-TEC, UTG Micro, and all Docter/Noblex footprint pattern red dots. Please refer to compatibility chart before purchasing.
• Red dot mount attaches directly to your red dot base using the Docter/Noblex red dot footprint pattern
• 45 degree offset design allows for the mounting of a secondary sighting system
• All Monstrum mount and accessory products come with a lifetime guarantee

Monstrum