10 Best Powered Speakers For Live Band of December 2025

• 1300 WATTS PER SPEAKER SYSTEM POWER - Ultra-efficient amplifier design with Dynamic Bass Response technology, 1000W low and 300W high frequency ultra-efficient Class-D amplification, maximum SPL peak is 126dB with a frequency range of 50Hz - 23kHz, precision digital crossover
• FEATURES - 12" High-output woofer and 1.4" Titanium dome compression driver tweeter, 4 application specific speaker modes, built-in 2-channel mixer with Vita preamps and Wide-Z technology, XLR thru output allows for simple wired connection to other Thump loudspeakers
• HIGHEST QUALITY - Universal power supply with Power Factor Correction technology, tripod and pole-mounting options, 4 handle and dual angle design, speaker weight is 29.1 Lbs and size is (H x W x D) 24.2" x 14.1" x 14"
• SYSTEM REQUIREMENTS - Standard US 110V grounded wall plug, any audio device with an XLR, Speakon or 1/4 inch outputs. Use for DJ, PA, karaoke, live stage, party or home
• WHAT'S IN THE BOXES - 2 Mackie THUMP12A powered speakers with power cables, instruction manuals

Acoustic Audio by Goldwood

• Rockville RSG-12 Carpeted Passive Loudspeaker. Single 12” Pro Audio Woofer. (3) Piezo 3" Bullet Tweeters. (1) High Efficiency Piezo Compression Horn.
• RMS Power: 500 Watts. Program Power: 750 Watts. Peak Power: 1000 Watts. 2” High Temperature Aluminum Voice Coil. 8-Ohm Impedance.
• Sensitivity: 99dB @ 1w/1m. Frequency Response: 45Hz - 22 kHz. SpeakON Input connection. ¼” In/Out connections (Parallel). Dimensions: (15.4+8.6)x12.5x25.5in.
• Weight: 28Lbs. Pole Mountable. Rubber Isolating Feet. Construction: Top quality MDF - Stapled, Bonded & Braced
• Multiple inputs, typically found on high-end speakers are standard equipment on the Rockville RSG-12. Two input connectors, ¼” IN/OUT and speakON connection make the Rockville RSG-12 able to integrate in to any existing amplification system. Additional installation flexibility is available via the reinforced, built-in 35mm pole socket mount located on the underside of the cabinet.

Rockville

• Woofer - 15" 2 way w/ 50oz magnet & a 2.5” kapton voice coil.  350 Watts RMS -700 Peak
• 8 ohms 45Hz –20KHz Sensitivity: 96 db. Tweeter: 1.5" Titanium driver 10z. magnet & 1" throat
• Crossover: 12/18db per octave 3000hz high power w/ dual glass bulb tweeter protection
• 5/8 plywood front panel. Black carpet with black metal corners. Recessed handles. Metal Grill
• Input terminal has two 1/4" & two Speakon inputs. 1.5” stand mount. 29” T -19” W -15” D

Seismic Audio

• 1000W of ultra-efficient Mackie Active electronics provide total system optimizations-D Fast Recovery amplification
• Mackie Active electronics provide total system optimization
• Precision crossover (125Hz)
• Output Wattage: 500 W

Mackie

• MODEL:CLA-2x5
• CONTENTS: One Compact Passive 2x5 Line Array Speaker
• CONDITION: New
• APPLICATION: Line Array Sound Reinforcement
• ACTIVE/PASSIVE: Passive

Seismic Audio

• Model: GH10L
• Contents: 10 Inch DJ Loudspeaker Cabinet
• Condition: New
• Active / Passive: Passive
• Power Rating: 300 Watts RMS; 600 Watts Peak each

Grindhouse Speakers

• 1100W of class D power
• DSP controlled for maximum output and protection
• Great as a main speaker or as a floor monitor

YAMAHA

• MODEL: SALA-210-PKG1
• CONTENTS: Four Premium Passive 2x10 Line Array Speakers
• CONDITION: New
• APPLICATION: Line Array Sound Reinforcement
• ACTIVE/PASSIVE: Passive

Seismic Audio

• Superior PA Sound – 2000W (1300 LF + 700 HF) active PA speaker with precision crossover and high-efficiency class D amplifiers
• Driving Bass, Pristine Highs - 10-inch (305 mm) LF driver, 2.5-inch (76 mm) high-temperature voice coil; 1.4-inch (35 mm) neodymium magnet HF driver with precision wave guide
• Setup Simplified - Lightweight, PA cabinet design for easy transport, set up and installation; pole-mountable, wedge monitor, bracket installation or flown application with M6 suspension points
• Ready for Any Situation - Integrated 2-channel mixer with dual XLR 1/4-inch combo mic/line inputs, independent level controls, XLR Link output, Contour EQ switch and Ground-Lift switch
• Precision Engineered - Designed and tuned in the USA

Alto Professional

• HIGH QUALITY XLR CABLE – Male & Female Balanced Connector Lets Musicians Hook Up a Microphone or Other Music or Lighting Equipment to Any Compatible 3-Pin Jack Input or Output
• PROFESSIONAL SOUND PERFORMANCE – Coluber Cable Reduces Outside Noise Interference for Crisp, Clear, Balanced Voice & Superior Signal Quality Over Both Short & Long Distances
• ROAD READY CONSTRUCTION – Quality Design Features Twin Conductive PVC Inner Shields, 98% Braided Shield, Noise-Reducing Yarn Wrap & Gold Plated Contact Points w/ Strain Relief
• ENDLESS PRO APPLICATIONS – Universal Connector Suits a Variety of Audio Setups; Dependable Choice for Live Stage Performance, Studio Recording, School & Church PA Systems & More
• COOL CUSTOM OPTIONS – Double Sided Input & Output are Joined by a Highly Durable Colored Cable in Black, White or Vibrant Color for Easy Identification; Choose Your Length & Connector Styles

COLUBER CABLE