10 Best Pilot Arc Plasma Cutter of December 2025

• CUT-50HF incorporates the most advanced IGBT inverter technology and non-touch pilot arc cutting processes, resulting in excellent arc stability. The cutting effect is very ideal and can finish the work effortlessly and quickly, regardless if the material is very rough, rusty, greasy, dirty, spray painted, etc. The lightweight model design makes the machine very convenient to carry anywhere.
• CUT-50HF can achieve perfect cutting, and the strength of its components makes it a reliable work tool for professionals or individuals. Can cut up to 4/5 in. stainless steel, alloy steel, low-carbon steel, copper, iron, pig iron, cast iron, aluminum alloy, aluminum and other conductive metals, resulting in straight cuts, angles, holes, curves, notches, slots, circles, v-grooves, and many others in minutes.
• CUT-50HF is an intelligent power supply system. The automatic selection function can automatically detect the input voltage, so that you can easily use it in of 90V to 300V, and the machine will automatically adjust it. It is designed for demanding industrial work and construction and simple tasks around houses. With less work, you can achieve better results overall with sharper cuts.
• 60% duty cycle can ensure long-term and efficient cutting. NPT 1/4 inch industrial D-type coupler can easily and quickly connect to the air compressor. Extending the power cord by 700 feet can also resist power fluctuations and cable attenuation; the machine can still work normally. It is fully suitable for difficult operations in construction sites, ship docks, agricultural sites, and relatively remote areas.
• CUT-50HF is designed with multiple safety and protection functions, such as automatic compensation for voltage fluctuations, over-heating protection, over-current protection, over-loading protection, plasma torch gun safety protection, etc. The fan with automatic temperature control allows the machine to run very quietly.

AmicoPower

• APC-70HF incorporates the most advanced IGBT inverter technology and non-touch pilot arc cutting processes, resulting in excellent arc stability. The cutting effect is very ideal and can finish the work effortlessly and quickly, regardless if the material is very rough, rusty, greasy, dirty, spray painted, etc. The lightweight model design makes the machine very convenient to carry anywhere.
• APC-70HF can achieve perfect cutting, and the strength of its components makes it a reliable work tool for professionals or individuals. Can cut up to 1.2 in. stainless steel, alloy steel, low-carbon steel, copper, iron, pig iron, cast iron, aluminum alloy, aluminum and other conductive metals, resulting in straight cuts, angles, holes, curves, notches, slots, circles, v-grooves, and many others in minutes.
• APC-70HF is an intelligent power supply system. The automatic selection function can automatically detect the input voltage, so that you can easily use it in of 90V to 300V, and the machine will automatically adjust it. It is designed for demanding industrial work and construction and simple tasks around houses. With less work, you can achieve better results overall with sharper cuts.
• 80% duty cycle can ensure long-term and efficient cutting. NPT 1/4 inch industrial D-type coupler can easily and quickly connect to the air compressor. Extending the power cord by 700 feet can also resist power fluctuations and cable attenuation; the machine can still work normally. It is fully suitable for difficult operations in construction sites, ship docks, agricultural sites, and relatively remote areas.
• APC-70HF is designed with multiple safety and protection functions, such as automatic compensation for voltage fluctuations, over-heating protection, over-current protection, over-loading protection, plasma torch gun safety protection, etc. The fan with automatic temperature control allows the machine to run very quietly.

AmicoPower

• Dual voltage plasma cutter :This is a 110/220V Non-HF Blow Back Pilot Arc Plasma Cutter, Input Power AC110/220V±15%,AC110/220V 55A cutting current with 60% duty cycle, 220V 55Amps 110V 35Amps Cutting Current.The working power range from 100V to 250V, Under 220V Pilot arc will not reliable if the voltage lower than 190V. Under 110V, the pilot arc will not reliable if the voltage lower than 100V
• Plasma cutter cutting thickness: Max Cutting Thickness 25mm@55A 220V 70PSI, Clean cutting thickness 20mm@55A 220V 70PSI, 12mm Clean Cutting thickness under 110V 60PSI. 63A power break, 45L/min Air compressor is suggested
• 2T/4T Function :Plasma cutting machine CUT60DN with 2T/4T function, also with Air/Cut Function, 2T 4T easy let the user operate machine and it is great help for the CNC cutting table. THC torch height control enabled. machine with function for torch protection, The LED light up if the torch connecting is not well, It will also lighting up while replacing the torch consumables,machine is not able to work while it lighting up
• CNC Plasma Cutting Machine : have 2 pins and 4 pins connecting port at rear of machine. 2 pins connector for The arc voltage output ratio 1:1, 4 pins connector for Signal Control.Easy works with CNC cutting table.The plasma cutter with Non-HF Pilot Arc function (Not HF Pilot Arc) Under this function, Pilot arc will not interference to machine( HF Pilot Arc will interference to machine)
• Suitable Material:This plasma cutter suitable cut 20mm standard mild steel, 16mm stainless steel, 16mm Alloy steel, 4mm copper, 8mm Aluminum. All the cutting thickness under the rate 220V 55Amps 60-75PSI, The cutting result may different depend on different voltage current and air pressure

hynade

• Non-touch Polit ARC: Can effectively cut rough, painted and rusty surfaces, and generates the least slag. The torch head does not need to touch the metal plate, then it will start arc. Better cutting quality and longer consumable life
• Powerful Cutting Effect: Up to 50A output, 60% Duty Cycle, maximum 1/2" clean cut.
• Multi-applications: Suitable for cutting stainless steel, alloy steel, low carbon steel, copper and other metal materials.
• Safety Protection: Certificated by ETL, built in over current protection, over load protection, temperature control.
• Portable: Auto-voltage adapts to 110 V - 220 V input power with adapter. Lightweight 13lb, can be carry and storage anywhere you need.

TOOLIOM

• ★ 𝐍𝐨𝐧-𝐓𝐨𝐮𝐜𝐡 𝐏𝐢𝐥𝐨𝐭 𝐀𝐫𝐜 𝐏𝐥𝐚𝐬𝐦𝐚 𝐂𝐮𝐭𝐭𝐞𝐫: 10-50AMP Plasma Cutter Current Output; Max Ideal Cut Thickness: 1/2" ; Max Severance Thickness: 3/4"; Pilot Arc Torch Efficiently Cuts through Rough, Painted, and Rusty Surfaces and Produces Minimal Slag; Compact Plasma Cutter Has a Handle for Portability and Uses Non-Hazardous Compressed Air to Cut Stainless Steel, Alloy Steel, Mild steel, Copper, and Aluminum
• ★ 𝐓𝐢𝐠 𝐖𝐞𝐥𝐝𝐞𝐫: 15-200AMP DC TIG Electric Current Output; Quality TIG welding on Stainless or Steel and Precise Welding of Thinner-gauge Materials; HF arc start hand torch control and Precise Foot Pedal Welding Heat Control(Foot Pedal & Argon Regulator are NOT Included).
• ★ 𝐒𝐭𝐢𝐜𝐤/𝐌𝐦𝐚 𝐖𝐞𝐥𝐝𝐞𝐫: 15-200 AMP DC Stick/MMA Electric Current Output; Easy ARC Start, Stable Welding Arc; Deep Weld Pool and Beautiful Welding Shape; Adjustable Hot Striking Arc Current which Can Greatly Improve the Arc-Starting Function; Suitable for Welding with Different Kinds of Acid or Basic Electrode.
• ★ 𝐒𝐞𝐭𝐮𝐩 𝐰𝐢𝐭𝐡𝐢𝐧 𝟏 𝐌𝐢𝐧𝐮𝐭𝐞: The pre-installed NPT 1/4” industry type D plug and air filter regulator allows you to quick connect to your air compressor by using the stand coupler existing on your air compressor. The whole machine can be setup quickly within 1 min.
• ★ 𝐁𝐮𝐲 𝐰𝐢𝐭𝐡 𝐂𝐨𝐧𝐟𝐢𝐝𝐞𝐧𝐜𝐞: We offer a 𝟑𝟎 𝐝𝐚𝐲 𝐦𝐨𝐧𝐞𝐲-𝐛𝐚𝐜𝐤 𝐠𝐮𝐚𝐫𝐚𝐧𝐭𝐞𝐞, 𝐚 𝟏-𝐲𝐞𝐚𝐫 𝐍𝐞𝐰 𝐑𝐞𝐩𝐥𝐚𝐜𝐞𝐦𝐞𝐧𝐭 𝐰𝐚𝐫𝐫𝐚𝐧𝐭𝐲 𝐚𝐧𝐝 𝐭𝐨𝐭𝐚𝐥 𝟑-𝐘𝐞𝐚𝐫 𝐥𝐢𝐦𝐢𝐭𝐞𝐝 𝐰𝐚𝐫𝐫𝐚𝐧𝐭𝐲, please submit warranty registration form on our website. 𝐎𝐮𝐫 𝐔𝐒𝐀-𝐛𝐚𝐬𝐞𝐝 customer service(via phone/email) is available to assist you.

LOTOS

• Non-Touch Pilot Arc: Efficiently cuts though rough, painted, and rusty surfaces and produces minimal slag. Pilot arc technology allows you to cut without touching the tip to the metal. Better cutting quality and longer consumable life.
• Built-in Post Flow：When you stop cutting, the air runs on for a minute to cool the consumable of the plasma cutter torch. This will extend consumable life.
• Powerful Cutting Ability：10-55 A DC output, 1/2”ideal clean cut and 3/4”maximum severance cut under 220/240V，60% Duty Cycle. Uses non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper, and aluminum.
• Lightweight and Portable：Allows for connection to 110- or 220-volt receptacles without tools，Portable in the shop or at the job site—at 13 lb the shoulder strap allows the end user to easily move from location to location
• Added Safety：Certificated by ETL，Automatic compensation for voltage fluctuation, over current protection, over load protection,temperature control

YESWELDER

• ★ 𝐍𝐨𝐧-𝐓𝐨𝐮𝐜𝐡 𝐏𝐢𝐥𝐨𝐭 𝐀𝐫𝐜 𝐏𝐥𝐚𝐬𝐦𝐚 𝐂𝐮𝐭𝐭𝐞𝐫: Efficiently cuts through rough, painted, and rusty surfaces and produces minimal slag. Pilot arc technology allows you to cut without touching the tip to the metal. Better cutting quality and longer consumable life.
• ★ 𝐒𝐚𝐟𝐞 & 𝐚𝐭 𝐋𝐨𝐰 𝐂𝐨𝐬𝐭: Newly Designed Upgraded torch and consumables ensure more precise cutting and durability of consumable life. Lower your usage cost. Compact plasma cutter has a handle for portability and use non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper, and aluminum.
• ★ 𝐒𝐞𝐭𝐮𝐩 𝐰𝐢𝐭𝐡𝐢𝐧 𝟏 𝐌𝐢𝐧𝐮𝐭𝐞: The pre-installed NPT 1/4” industry type D plug and air filter regulator allows you to quickly connect to your air compressor by using the stand coupler existing on your air compressor. The whole machine can be set up quickly within 1 min.
• ★ 𝐎𝐮𝐭𝐩𝐮𝐭 & 𝐏𝐞𝐫𝐟𝐨𝐫𝐦𝐚𝐧𝐜𝐞: 10-50A DC output, 1/2” ideal clean cut and 3/4” maximum severance cut under 220/240V. 10-35A DC output, 1/3" ideal clean cut and 2/5" maximum severance cut under 110/120V. SUITABLE CUTTING for Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, etc. Uses non-hazardous compressed air to cut, safe and at low cost.
• ★ 𝐁𝐮𝐲 𝐰𝐢𝐭𝐡 𝐂𝐨𝐧𝐟𝐢𝐝𝐞𝐧𝐜𝐞: We offer a 𝟑𝟎 𝐝𝐚𝐲 𝐦𝐨𝐧𝐞𝐲-𝐛𝐚𝐜𝐤 𝐠𝐮𝐚𝐫𝐚𝐧𝐭𝐞𝐞, 𝐚 𝟏-𝐲𝐞𝐚𝐫 𝐍𝐞𝐰 𝐑𝐞𝐩𝐥𝐚𝐜𝐞𝐦𝐞𝐧𝐭 𝐰𝐚𝐫𝐫𝐚𝐧𝐭𝐲 𝐚𝐧𝐝 𝐭𝐨𝐭𝐚𝐥 𝟑-𝐘𝐞𝐚𝐫 𝐥𝐢𝐦𝐢𝐭𝐞𝐝 𝐰𝐚𝐫𝐫𝐚𝐧𝐭𝐲, please submit warranty registration form on our website. 𝐎𝐮𝐫 𝐔𝐒𝐀-𝐛𝐚𝐬𝐞𝐝 customer service(via phone/email) is available to assist you.
• ★ 𝐏𝐚𝐜𝐤𝐚𝐠𝐞 𝐈𝐧𝐜𝐥𝐮𝐝𝐞𝐬: Power supply, Plasma cutting torch, ground clamp, Pre-installed NPT 1/4” industry type D plug and Air filter regulator, consumables, Instruction Manual, etc.
• ★ 𝐏𝐚𝐩𝐬𝐭 𝐀𝐝𝐯𝐚𝐧𝐜𝐞𝐝 𝐂𝐨𝐨𝐥𝐢𝐧𝐠 𝐒𝐲𝐬𝐭𝐞𝐦: ensures the plasma cutter has a stable and durable high performance.★ 𝐃𝐮𝐚𝐥 𝐕𝐨𝐥𝐭𝐚𝐠𝐞 𝐈𝐧𝐩𝐮𝐭: Automatic Dual Voltage / Dual Frequency (110/120 V 220/240 V 50/60Hz).
• 50 Amp Digital Inverter Air Plasma Cutter
• Automatic Dual Voltage / Dual Frequency (110/220V 50/60Hz)
• PAPST Advanced German Cooling System
• Max Severance Thickness: 3/4"
• Max Cut Thickness: 1/2"

LOTOS

• 🛡️ Non-touch Pilot Arc Plasma Cutter★: Pilot Arc Technology Allows You To Cut Without Touching The Tip To The Metal.Efficiently Cuts Though Rough, Painted, And Rusty Surfaces. Portablet Plasma Cutter Has A Handle For Portability And Uses Non-hazardous Compressed Air To Cut Stainless Steel, Alloy Steel, Mild Steel, Copper, And Torch Efficiently Cuts Though Rough, Painted, And Rusty Surfaces And Produces Minimal Slag; Better Cutting Quality And Longer Consumable Life.
• 🛡️50 Amp OUTPUT & PERFORMANCE★: Up To 50A Output Current Can Cut Up To 31/64 Inch (13.0mm) Plate. Equipped With Digital Display And Alarm LED, Read The Output Welding Current.
• 🛡️ PACKAGE INCLUDES★: Power Supply, Plasma Cutting Torch, Ground Clamp,Converter Power Cord, Pre-installed NPT 1/4” Industry Type D Plug And Air Filter Regulator, Consumables, Instruction Manual, Etc.(As Picture)( Stainless Steel,Gas Tube, Hoop,Plasma Tips Nozzle Extended, Electrode- Extended,Shroud Ceramic Cup ,Gas Ring)
• 🛡️Plasma Cutter Can Be Plugged Into 120V / 240V Dual Voltage Using(Automatic Fitting).

Hiweld

• 【Non-Touch Pilot Arc Plasma Cutter】： DC550DP has the function of Inverter technology high frequency arc initiation（50/60HZ）, the cutting torch or cutting mouth doesn't need to touch the workpiece can achieve arc cutting, which is safer and not easy to damage the workpiece.
• 【Dual Voltage 110/220V】：This plasma cutter designed under 110/220V, auto inspect indicate 110 and 220v, hand switch is not required on machine. There are two voltage lights at front of panel, 110V lighting when connect machine to power 110V, light 220V will lighting up when connect machine to power 220V, In this case the user easy knows the what kinds of voltage connecting machine.
• 【Cutting Thickness】：This plasma cutter easy cut all metals especially stainless steel. Quality cutting thickness for steel is 10mm#65PSI(0.65Mpa) 220V 50Amps, Max cutting thickness 14mm#65PSI 220V 50Amps; Under 110V 35Amps, the quality cutting thickness is 6mm#60PSI(0.6Mpa) 110V Max cutting thickness is 10mm#60PSI(0.6Mpa) 110V. The current for this plasma cutting machine, 50Amps in 220V, 35Amps in 110V. To cut copper, 3mm#60PSI(0.6Mps)220V 50Amps is suggested.
• 【Quality accessories】：We only producing high quality machine and supplying quality accessories. 4m AG60P pilot arc cutting torch, earth clamp with 2 meters lead, 2 pcs torch electrodes, 2 pcs tip. 2 meters air hose, 1 set air regulator with air gauge. Machine come with 110V power plug, also with 1 pc wire adaptor from 110V to 220V plug.
• 【Air gauge fit at front of machine】：Air regulator and air filter fit inside of machine, The cold water auto release.

Dynaloop

• 🛡️ Non-Touch Pilot Arc Plasma Cutter★: Pilot Arc Technology Allows You To Cut Without Touching The Tip To The Metal.Efficiently Cuts Though Rough, Painted, And Rusty Surfaces. Portablet Plasma Cutter Has A Handle For Portability And Uses Non-hazardous Compressed Air To Cut Stainless Steel, Alloy Steel, Mild Steel, Copper, And Torch Efficiently Cuts Though Rough, Painted, And Rusty Surfaces And Produces Minimal Slag; Better Cutting Quality And Longer Consumable Life
• 🛡️50 Amp OUTPUT ★: Up To 50A Output Current Can Cut Up To 31/64 Inch (13.0mm) Plate. Equipped With Digital Display And Alarm LED, Read The Output Welding Current
• 🛡️ PACKAGE INCLUDES★: Power Supply, Plasma Cutting Torch, Ground Clamp,Converter Power Cord, Pre-installed NPT 1/4” Industry Type D Plug And Air Filter Regulator, Consumables, Instruction Manual, Etc.(As Picture)( Stainless Steel,Gas Tube, Hoop,Plasma Tips Nozzle Extended, Electrode- Extended,Shroud Ceramic Cup ,Gas Ring)
• 🛡️Plasma Cutter Can Be Plugged Into 120V / 230V Dual Voltage Using(Automatic Fitting)

S7