10 Best Panel Bonding Adhesive of December 2025

• 3M Panel Bonding Adhesive is a two-part epoxy adhesive which provides extended work-time but can be rapidly cured with heat.
• It is packaged in a 200 ml cartridge and is to be used in conjunction with our 08117 Premium Manual Applicator and the 08193 Static Mixing Nozzles.
• Panel Bonding Adhesive has excellent adhesion to a wide variety of plastic and metal substrates.
• When the manufacturer's directions are followed, this product can be used to bond door skins, roof skins, quarter panels and box sides.
• In addition, product can be used for bumper cover repair under certain conditions. Typical substrates include cold roll steel, aluminum, SMC, and FRP.

3M

• (1) 8571 Applicator Gun Supports 200mL Cartridges
• (1) 8115 200mL panel bondingadhesive fro aluminum, FRP, SMC, Steel
• 8115 Adhesive Fully Cures in 24 hours
• (2) 08193 Mixing Tips
• Product dimensions: 12.2 x 5.8 x 9.3 inches

3M

• 2 Pack! Save some money.
• Two part opexy used to bond steel, aluminum, SMC, and FRP (traditional fiberglass).
• Primary use is to replace quarter panels, roofs, box sides, van sides, utility vehicle
• Cures on demand with addition of heat.
• Glass beads work as built in spacers for optimum bond line thickness.

3M

• Recommended by many OEMs
• Provides corrosion protection with lifetime warranty
• Room temperature curing (accelerated curing with heat)
• Can be weld bonded or rivet bonded within working time
• Adheres to a wide variety of properly prepared steel and aluminum substrates
• May be used on many plastic and composite substrates

3M

• Multi-Purpose Panel Adhesive, Plastic Cartridge 7oz SEM-39747

SEM

• Door skin bonding
• Superior strength
• Bonds Metals & SMC
• 8.5fl oz
• 250mL

Evercoat

• 3M Panel Bonding Adhesive is a two-part epoxy adhesive which provides extended work-time but can be rapidly cured with heat.
• It is packaged in a 200 ml cartridge and is to be used in conjunction with our 08117 Premium Manual Applicator and the 08194 Static Mixing Nozzles.
• Panel Bonding Adhesive has excellent adhesion to a wide variety of plastic and metal substrates.
• When the manufacturer's directions are followed, this product can be used to bond door skins, roof skins, quarter panels and box sides.
• In addition, product can be used for bumper cover repair under certain conditions. Typical substrates include cold roll steel, aluminum, SMC, and FRP.

3M

3M

Speedokote

Woodhead Publishing