10 Best Paint For Concrete Pool Deck of December 2025

• Durable, skid resistant finish anti slip paint for interior or exterior application, excellent color retention, abrasion resistance, and resistance to ponding water.
• High traffic slip resistant paint for concrete that’s ideal for stairs, walkways, patios, and more.
• Fast drying, durable, easy application that fills and seals cracks.
• 80 - 120 square foot coverage per gallon.
• On exterior applications, do not apply when rain is threatening. Not for immersion service.
• Before painting, review the INSL-X Sure Step label for proper preparation and application tips.

INSL-X

• Apply to bare concrete or plaster surfaces over old rubber base coatings
• Two coats suggested for initial application
• Yielding a 2 - 3 year average life
• Rubber-Base Pool Paint is applied with a paint roller
• Coverage : 250 square feet per gallon on average

In The Swim

• Mix 2-component material together and trowel into cracks
• Compound cures overnight so you can paint the next day
• Compatible with all pool coatings
• Suitable for use underwater or above water cement repairs
• 10 lb bucket covers 16-18 ft when filling 3/4 in. x 3/4 in. crevice on average

In The Swim

• Used with water and the liquid bonder.
• Sand Buff color matches most brands of colored cements/sand textures.

E-Z Products

• Breathe new life into your concrete surfaces with KILZ interior/exterior decorative concrete paint formulated for driveways, garage floors, pool decks, patios & porches
• Easy to apply concrete paint fills in hairline cracks up to 3 mm and stands up to hot tires, dirt and grease
• Slip-resistant surface is ideal for pool decks and walkways
• Important: must apply this product with a 1/4 inch adhesive roller cover. One gallon covers about 50 sq.'. With 2 coats. Shake the can before use
• Durable, protective finish enhances the look of concrete surfaces

Kilz

• Acrylic concrete, stucco, and brick paint coating designed for application to interior or exterior, vertical, or horizontal masonry surfaces
• Can be applied in one coat, as a stain; or two coats for an opaque finish
• Non fading, fast drying concrete stains with durable finish that resists detergents, oils, grease, & scrubbing
• 300 - 400 square foot coverage per gallon
• Do not apply in direct sunlight or on hot surfaces
• Do not apply when material temperature is above 90 °F (32 °C)

INSL-X

• Resurfaces old pool deck surfaces, restoring beauty.
• Reduces heat buildup on concrete surfaces by up to 38%.
• Able to tint to any imaginable color.
• Most pool decks can be completed in one day!
• Satisfaction guaranteed!

Encore Coatings

• Excellent for restoration of concrete surfaces
• Leaves a Non-Slip Finish when dry
• Can be applied to a damp surface
• Two coats required on initial application
• Coverage: 90 - 125 sq ft per gallon depending on surface porosity

In The Swim

• USED AT THEME PARKS: Our revolutionary pool and deck product is the coating-of-choice for water theme parks, resorts, national landmarks, and now residential swimming pools. We offer commercial functionality to you at an affordable price…because it works!
• COMFORTABLE FEET: If the walk to your pool is more like a sprint, COOL is for you! Our revolutionary coating absorbs the heat and transfers it directly into the soil below to keeping your feet comfortable and your pool area cooler. Our pool deck coating seals your concrete and drops the temperature by up to 38%.
• NO SLIPPERY SURFACES: If a safe pool area is a top priority for you, COOL is the perfect solution for a safe, skid-resistant surface around your swimming pool or hot tub. Meets ADA safety requirements for non-slip surfaces – even when it’s wet!
• REPAIRS CONCRETE & STAYS CLEANER: COOL’s specialized coating bonds with concrete at a molecular level, filling in cracks and permanently sealing them. The smooth, sealed surface makes it difficult for dirt to hide – simply clean the concrete with soap and water. COOL stands up to pressure washing and doesn’t peel or chip. (Note: Apply Encore’s SealBack Nano-Acrylic Sealer for extra protection.)
• EASY TO USE: Just spray the concrete with Triple Crown, then wash away the dirt and debris that Triple Crown lifts from the surface. Let dry completely and apply the COOL treatment. Mix the kit with water and apply COOL with a paint roller. (Note: Add 1 gallon acrylic paint to color the coating to enhance your pool area.) Dry for 30 minutes and apply a second coat of COOL. Apply our SealBack treatment to make everything almost completely permanent.

Encore Coatings

• Two-part epoxy primer
• Used for fiberglass, rough plaster, rough concrete, new gunite or sandblasted surfaces
• Heavy viscosity to fill imperfections in rough surfaces
• Applied with a paint roller
• Coverage: Approximately 100-150 square feet per gallon

In The Swim