10 Best Poe Switch For Ip Cameras of December 2025

• 24 POE PORTS W/ 2 ADDITIONAL NON POWERED GIGABIT RATED PORTS - This unmanaged POE switch is actually a 26 Port switch in total. (24) 10/100 POE Rated Ports Designed for your IP Cameras or other devices that require POE. (2) Additional Non Powered Gigabit Rated Uplink Ports for fast and smooth transfer of all combined network traffric from your cameras to run to your NVR/Server and/or Router.
• EACH PORT CAPABLE OF PUSHING POE+ UP TO 30 WATTS PER PORT FOR POWER HUNGRY DEVICES - If you have cameras or devices that require abnormally high wattage, such as a PTZ for example, this switch has the ability to push up to 30 watts (POE+ IEEE802.3af/at) per port for devices such as this. Of course it also works just fine on any device that requires lower wattage POE Power as well as the switch will only push the amount of power that the device needs.
• TOTAL POE WATTAGE BUDGET OF 250 WATTS - This is normally more than enough wattage to push atleast 24 IP cameras with a mixture of both POE+ (IEEE802.3at) and Standard POE (IEEE802.3af) devices. As long as the combined maximum wattage from all your devices does not exceed a total of 250 watts, this device works perfectly. This will be more than enough wattage to fit the majority of scenarios.
• FANLESS QUIET DESIGN & SMALL FOOTPRINT - Only 13"x8"x1.75" in measurement, smaller than most other 24 Port POE switches. Fanless Quiet Design. This POE switch is powerful enough to be used in commercial applications yet designed with features that make it viable for residential and small business applications as well.
• RACK MOUNTABLE WITH INCLUDED RACK EAR MOUNTS - Includes all the hardware needed to mount to your server rack. However, since the unit is so small and quiet, you can easily just use it in a desk mount scenario as well.

IPCamPower

• Can Serve 2 Purposes (or both at the same time): #1) Can be used as a POE powered 2 Port POE switch #2) Can be used to extend your network cable run past the normal 300 meter distance limitation
• POE powered 2 Port switch: Has 1 port in and 2 ports out. Takes incoming POE through the in port and will act as a 2 port unmanaged POE switch through the 2 out ports to 2 more networkable devices.
• POE and/or Network Range Extender: Allows you to run cable lengths past the tradition 300 feet restriction. Daisy chain up to 2 extenders to run upwards to 900 feet
• Requires no local power, you dont need a power source nearby the extender as its simply powered from the incoming POE power from your POE switch or injector at the beginning of the cable run. (POE injector/switch is not included)
• Wall mountable low profile design. only 3.1" x 3" x 1"

IPCamPower

• The new and powerful upgrade for HC1709P: Power consumption upgrade from 65W to 96W + Human oriented design of power usage + Build-in power supply.
• 8 PoE+ Ports plus 1 Uplink Port 10/100Mbps PoE Switch, Supports PoE power up to 30W for each PoE port, 96W for all PoE ports, full IEEE802.3af/at standard compliant.
• Security&Reliable. Smart PoE Power Supply, automatically identification, never destroy the front equipment. One-by-one port start function, avoid devices breakdown caused by surges or high loads. VLan functin, to prevent the invasion of network storm.
• This PoE switch is ideal for powering PoE devices such as IP cameras, WLAN access points, IP phones, offices, office access control systems, and other PD devices and offers a line of high quality products that provide a total solution for Ethernet application in different environments.
• LIMITED LIFETIME WARRANTY and 24/7 Technical Support.

Huacomm

• Extended wireless coverage: Adds WiFi range coverage up to 1000 square feet, and connects up to 15 devices such as laptops, smartphones, speakers, IP cameras, tablets, IoT devices, and more
• AC750 WIFI speed: Provides up to 750Mbps performance using dual band and patented FastLane technology
• Universal compatibility: Works with any wireless router, gateway, or cable modem with wifi. The product may not be compatible with routers or gateways with firmware that has been altered, is based on open source programs, or is non standard or outdated
• Wired ethernet port: Simply plug in game consoles, streaming players, or other nearby wired devices using the one 10/100M port for maximum speed
• Safe & secure: Supports WEP and WPA/WPA2 wireless security protocols
• Simple to setup: Press the WPS button to connect to your router. Use the NETGEAR WiFi Analyzer app for optimal location

NETGEAR

• 8 PoE+ Ports at 10/100Mbps
• 1 Ethernet Uplink Port at 10/100Mbps
• 120W Max Power - up to 30W per port
• Auto-MDI/MDI-X | IEEE 802.3af/at
• Compact Design with Internal Power Supply

BV-Tech

• 4 PoE+ Ports and 2 Ethernet Uplink Ports at 10/100Mbps each, making network setups easier and more convenient.
• Hi-PoE at port 1 providing up to 60W single port, PoE+ at port 2-4 up to 30W per port, which is better than normal PoE port that can only provide 15. 4W per port. 60W Max Total Power (includes 60W DC adapter).
• Extend function extending max PoE transmission distance from 100 meters to 250 meters
• PD detection will automatically detect and provide required power for your PoE devices **Note: Do not support passive PoE device**
• 100% Satisfaction – 30-day Money-Back with 1 Year and Lifetime Tech Support

BV-Tech

• 8 Port PoE Switch:8 x 10/100 Mb per seconds PoE ports for Security IP Camera Connection & 2 x 10/100Mbps fast Ethernet Uplink ports for Router/NVR connection, Plug & Play
• This unmanaged 8 PoE ports switch support IEEE802.3AF/AT Network protocol standard, easy set up with no configuration needed, Power & Data Transmission Up To 820 ft / 250m(extend active) without data packet lost
• Each port supports auto MDI/MDIX and auto negotiation.Store and forwarding, support port isolation.
• Support IEEE802.3af/at standards, can provide 15.4W/30W per port.
• Automatic detection and recognition PD device which in accordance with IEEE 802.3af/at and power supply for the device.

ThePoEstore

• This PoE switch has 8 *1000Mbps ethernet ports, backplane bandwidth is 12Gbps, facilitating high-speed data exchanges.
• The PoE ports support automatic detection, enable for PoE and non-PoE devices, such as PoE Cameras, APs, computer, nvr, router and so on. Plug and play setup, easy to use, requires no configuration or software.
• Built-in power supply, compliant with IEEE 802.3af/at PoE power supply. The whole power is 120W, up to 30W per port, suitable for multiple devices.
• Durable metal with bilateral heat dissipation, supports both desktop or wall mounting, can be widely used in security monitoring, computer networks, wireless coverage, office and household, etc.
• 30 days hassle-free money-back, replacement without repairing for One Year. Any problem, please do not hesitate to contact us.

Narpult

• 48 POE PORTS W/ 3 ADDITIONAL NON POWERED GIGABIT RATED PORTS - This unmanaged POE switch is actually a 51 Port switch in total. (48) 10/100 POE Rated Ports Designed for your IP Cameras or other POE Devices. (3) Additional Non Powered Gigabit Rated Uplink Ports for fast and smooth transfer of all combined network traffric from your cameras to run to your NVR/Server and/or Router.
• 3 TOTAL COMBINED GIGABIT 10/100/1000 UPLINKS - Uplink Port 1 is an Ethernet Port. Uplink Ports 2 & 3 are Ethernet/SFP FIber Combo Ports meaning you can choose to use either the Ethernet port or the Fiber Port for each of these uplinks. Note you can only use 3 uplink ports at one time.
• TOTAL POE WATTAGE BUDGET OF 400 WATTS - This is normally more than enough wattage to push atleast 48 IP cameras with a mixture of both POE+ (IEEE802.3at) and Standard POE (IEEE802.3af) devices. As long as the combined maximum wattage from all your devices does not exceed a total of 400 watts, this device works perfectly. This will be more than enough wattage to fit the majority of scenarios.
• EACH PORT CAPABLE OF PUSHING POE+ UP TO 30 WATTS PER PORT FOR POWER HUNGRY DEVICES - If you have cameras or devices that require abnormally high wattage, such as a PTZ for example, this switch has the ability to push up to 30 watts (POE+ IEEE802.3af/at) per port for devices such as this. Of course it also works just fine on any device that requires lower wattage POE Power as well as the switch will only push the amount of power that the device needs.
• RACK MOUNTABLE WITH INCLUDED RACK EAR MOUNTS - Includes all the hardware needed to mount to your server rack. However, since the unit is so small and quiet, you can easily just use it in a desk mount scenario as well. Dimensions are 17.25" x 11.5" x 1.75"

IPCamPower