10 Best Guitar Attenuator of December 2025

• Tames a screaming loud tube amp by running through the effects loop and controlling the amount of signal sent to the power section
• Lets you really push the front end of your amp for the natural feel and tone that you can’t get any other way
• Retain the response and tone of your amp’s sweet spot at lower levels
• High grade components keep your tone clear and pure
• Passive design doesn’t require any power
• Designed to be compact, sturdy, and simple to integrate into your rig
• Can easily be mounted underneath your pedalboard

JHS Pedals

• The Step Ladder is a passive input attenuator using high quality components for excellent reliability
• True-bypass mode provides the maximum signal level
• The attenuator pot and two toggle switches allow for flexibility in the amount of signal attenuation when not in bypass mode
• Treble bleed capacitors in the circuit retain crisp high frequencies even at maximum attenuation
• The Step Ladder is ideal for anything from getting a slight boost while playing single-note acoustic guitar leads or for jumping from clean to overdrive in a high-gain electric guitar amp

Mod Kits

• Premium, no-compromise analog reactive load box and guitar recording system for tube guitar amps
• Instant album-quality mic and speaker cabinet tones via front-panel RIG control
• Get record-ready sounds quickly with expertly-placed virtual mics and cabs - no amp miking required
• Five finely-tuned guitar amp attenuation levels, from completely silent to whisper quiet to full band volume
• UA Dynamic Speaker Modeling emulates speaker drive, breakup and cone cry

Universal Audio

• Single knob control to Simple operation
• Single Knob Controls -VOL Attenuator
• VOL Attenuator to lower your level for a clean sound
• Bring out new tonal combinations from your favorite old pedals.
• With True Bypass Switching

Mumusic

• Power Handling: 30W R.M.S. Maximum
• Input Impedance: Fixed Impedance; 8 Ohms only
• Speaker Impedance: Fixed Impedance; 8 Ohms only
• Attenuation Levels: A total of 18 distinct attenuation levels are available
• Line Out: Recording / D.I. output, impedance = 10K Ohms; level = -10dbu

Tone King

• True Power Tube Speaker Attenuator
• Full moneyback satisfaction guarantee
• Preserve pumping tube tones at lower volumes
• Boutique crafted in USA
• Works on all 8 ohm amps 60 watts or less

Carl's Custom Guitars

• High quality Electronic components and circuit design keep your tone clear and pure.Keep the dynamics and tone of your amp’s sweet spot at lower levels.
• True bypass.Running through the 【FX loop】 and controlling the amount of signal sent to the power section. Let you really push the front end of your amp for the natural feel and tone.
• Easy-to-use passive attenuator. Passive design doesn’t require any power .The LED only displays whether the pedal is on or not.
• Set output level to minimum immediately by tapping MINIMUM footswitchOnboard knobs and switch provide flexible sound character.
• DC 9V Adapter power supply. (plug polarity is positive on the barrel and negative in the center).(NOT INCLUDED)

Donner

• Passive 100-Watt Power Attenuator allows you to get the ultimate overdriven tone at any volume
• Multi-impedance input connectors (4, 8 and 16 Ohms) to match virtually any amplifier
• Line output with dedicated Level control
• Emulated Mic Output mimics a microphone in front of a speaker cabinet
• 3-Year Warranty Program*

Bugera

• Speaker Simulat - 8 ohm
• Direct Box
• Load Box
• Attenuat

Two Notes

• ¼ “ DEVICE CONNECTOR: Provides a variety of DI solutions with its ¼ inch device connector and detachable AC power cord for live sound recording applications. It allows you to easily connect keyboards, guitars & outboard signal processors
• PROVIDES CLEAN AUDIO: Useful for connecting unbalanced signals from sources submixers, effects processors & keyboards to a main PA or recording mixer. This impedance transformer also has buzz & hum cancellation ability
• EASILY CONNECTS INSTRUMENTS: Getting the signal of a musical instrument to the PA system is easier with this direct box. Just connect the electric bass, guitar, keyboard or other processors to the ground lift adapter & enjoy pure & clean audio
• VERSATILE DIRECT BOX: Aside from music instruments, the DI unit can also be connected to the line output of a boom box or consumer stereo system if you want to sample old records. The hum eliminator is used for connecting unbalanced devices as well
• DURABLE MATERIAL: Made of all steel chassis, this direct injection box is guaranteed to last for a long period of time. Aside from its heavy duty construction, it is also a convenient tool for musicians as it can power up to 10 effects pedals

Pyle