10 Best Drill Guide of August 2025

• 17 drill sizes, from 1/8" to 3/8", in 1/64" increments
• Use on flat surfaces, round parts, and corners
• Special nickel alloyed steel heat treated for durability
• Non-plated material with light oil coating to prevent rust
• Alignment marks on guide to line up on center

Big Gator Tools

• PRECISE DRILL GUIDE: Use the DCT Standard SAE Drill Bit Guide Set to accurately locate exact drilling centers and guide drill bits perfectly perpendicular to the woodworking piece on flat, round, spherical, and corner edges; Economical drill press substitute with top quality and precision (not a clamp or vise substitute); Additionally use as a quick and accurate dowel drilling guide for edge joining
• DRILL ANY SHAPE BOARD: Drill perfectly straight holes through even the thickest board no matter what the shape of the piece being drilled; Drill on sides, edges, spheres, and cylinders; For spheres, use disc-shaped recess on bottom of drill guide; For cylinders and edges (especially drilling pipe and dowels), use V-shaped groove on bottom of drill guide to position drill guide
• QUICKLY FIND CENTER: Drop the included locating center punch pin inside the 3/16-inch bushing (one way fit – flat top of pin first into bottom of bushing – do not attempt pointed tip end into bushing) and then center over the spot to drill; To find the center line on an edge, place 2 small nails (not included) in drill guide holes and turn drill guide so each nail touches opposite side of the wood
• VARIETY OF SAE SIZES: Standard (SAE) drill bushing sizes include 3/16”, 1/4”, 5/16”, 3/8”, 7/16”, and 1/2” inch; Each drill bushing has permanently laser-etched size markings for quick identification
• CONTENTS: Package includes (1) guide, (1) locating pin, and (6) standard drill bushings for your convenience

DCT

• 3/16 inch bushing, 1/4 inch bushing
• 5/16 inch bushing, 3/8 inch bushing
• 7/16 inch bushing, 1/2 inch bushing
• Locating pin
• Drilling guide

Steelex

• Includes: (1) STD500NP, (1) STD1000DGNP, (1) STD2000DGNP & (1) SDGMINI
• Special nickel alloyed steel heat treated for durability. Non-plated material with light oil coating to prevent rust.
• Centers the holes on pipes, dowels & outside corners. Flat side allow 90° drilling into flat surfaces-just clamp and drill.. Automatically squares up the drill with the surface. Alignment marks on both sides, to line up on center.
• Bottom surface is precision ground to ensure stability & accurate perpendicular alignment on flat surfaces. Round stock hole alignment marks on one side.
• Prevents drill bit wander. Portable, pocket-sized and housed in a handy plastic storage case w/surface ridges to prevent opening, PegBoard-Friendly. Only shipping one of each V-Drill Guides "NO" other tools or ruler included

Big Gator Tools

• Self-retracting guide sleeve protects fingers and holds screws in place
• Magnetic bit holder for driving screws
• Fits up to size 10 screws
• Self-retracting guide also eliminates wobbling and slipping

DEWALT

• Made in USA, Portable, pocket-sized,Prevents drill bit wander
• Round stock hole alignment marks on one side
• Special nickel alloyed steel heat treated for durability
• Non-plated material with light oil coating to prevent rust
• Centers the holes on pipes, dowels & outside corners

Big Gator Tools

• Includes a 1/2-inch keyed chuck and onboard key storage
• Operates at 5 different speeds: 740, 1100, 1530, 2100, 3140 RPM
• Spindle travels up to 2 inches with easy to read, locking linear depth stops for accurate and repeatable drilling operations.Cord Length (ft.):6
• Durable 1/3 HP induction motor develops ample torque and power
• 6-1/2 x 6-1/2" worktable is height adjustable and bevels up to 45 degrees left & right
• Swing: 8 inch. Motor: 120V, 60Hz. Horsepower: 1/3 HP.

WEN

• BUILT IN PROTRACTOR- drills accurate right-angled or variable-angled holes with the built-in protractor scale
• ADJUSTABLE- adjusts from 0 to 45 degrees in 5-degree increments in either direction of vertical drill position
• POSITIVE STOP- built-in depth stop for accurate drill depth
• WORKS WITH DOWELS- v-groove for positioning round stock, pipe or tubing. A slide lock facilitates sanding and buffing
• STABLE- anchoring pins to hold the guide securely in place on flat surfaces, narrow edges or large tubing

General Tools

• Steel drill gauge for checking fractional bit diameters

IRWIN

• Universal & portable V-Drill guide provides perpendicular alignment of drill bits on flat, round and square cornered materials
• Includes 9 standard drill sizes: 3/8", 25/64", 13/32", 27/64", 7/16", 29/64", 15/32", 31/64", 1/2"
• Heat treated nickel alloy steel provides durability & accuracy
• Precision ground base provides perpendicular alignment of drill bit on flat materials
• V-Groove aligns drill bits on round and square cornered materials

Big Gator Tools