10 Best Bilge Pump of December 2025

• Flow Rate: 1100 GPH; Voltage: 12 VDC
• Flow: 1100 gallons per hour or 5000 L / hour, Head: 13 Ft (4mts), Outlet Dia. 1-1/8" (29mm)
• Typical Uses: Suitable for hydraulic systems fed with cold water—used in line to be fed by gravity or pressure
• Ideal For Fishing Boats, Cruisers, Runabouts, Yachts, Etc
• Built for the harsh marine environment, are suitable to withstand the most adverse condition. The water-cooled engine ensures a long service life

MAXZONE

• 24 inch hand operated bilge pump
• Essential safety accessory
• Comfortable hand grip
• Removes 8 gallons per minute
• Lightweight and impact resistant plastic construction

SEACHOICE

• Flow Rate: 1100 GPH; Voltage: 12 VDC
• Flow: 1100 gallons per hour or 5000 L / hour, Head: 13 Ft (4mts), Outlet Dia. 1-1/8" (29mm)
• Typical Uses: Suitable for hydraulic systems fed with cold water—used in line to be fed by gravity or pressure.
• Ideal For Fishing Boats, Cruisers, Runabouts, Yachts, Etc
• Built for the harsh marine environment, are suitable to withstand the most adverse condition. The water-cooled engine ensures a long service life

ECO-WORTHY

• Reliably provides bilge water pumping for boats of any size
• Meets automatic switch pump requirements for any vessels 20 feet and over with sleeping accommodations
• Also convenient and useful for boats of any size
• Compact and durable package includes pump, wire seals, strainer, and mercury-free switch in one unit
• Installs quickly and easily in tight spaces, mounts horizontally only
• 12-volt, 1.5-amp draw pump is rated for 500 GPH performance at open flow (at voltage of 13.6 volts DC)
• Comes with a 29-inch length of 16-gauge caulked and tinned copper wire, and uses a ¾-inch interior diameter hose

attwood

• Perfect purchase for a gift
• Great craftmanship
• A must buy item
• Anti-Leak Design Removable Hose For Easy Storage Self-Priming Reach Small, Compact Areas With Ease Light Weight Corrosion Resistant
• Large ergonomic, easy grip, high impact handle.
• Tube cap. Caps the tube and forces the water out of the outlet and also supports the plunger shaft.
• Plunger spacer keeps the shaft from coming up too far and damaging the plunger washer.
• Plunger washer forces water up and thru the outlet.

SeaSense

• The Shoreline Marine 800 GPH bilge pump securely clips into the mounting base for easy installation and is removable to clean and inspect the pump
• This universal mounting base is designed to be mounted either through the bottom or through the side so it can be screwed down into a mounting pad or to a stringer or the transom
• The bilge pump is fully submersible with a water pumping capacity of 800 GPH
• The ¾” O.D. outlet hose barb is designed to be used with standard ¾” I.D. bilge hose
• Its ignition protected, uses a very low 5 amps operating current and has tinned marine grade lead wires

Shoreline Marine

• Non-automatic, used with a panel switch or Rule float switch
• Submersible and ignition protected
• Highly efficient, low amp motor
• Stainless-steel shaft
• Includes backflow preventer

Rule

• A genuine Rule product, don't settle for anything less
• More pumping capacity and more exclusive design features than any comparable competitive pump at a lower cost
• 1-1/8 inch (28. 6 millimeter) hose barb discharge outlet, 12 Volts DC, limited 3 year
• Silent and vibrationless operation. Stainless steel shaft, completely submersible, rust and corrosion protection
• Compact, efficient, long-life motors, able to run dry for short periods

Rule

• Flow Rate (GPH): 1100GPH; Volt: 12V; Current(A): 3.8A; Head(M): 3.0M
• Wire Lead(M): 1m; Outlet Diameter: 29mm/ 0.95 Inch (1-1/8"); Width: Approx. 81mm
• Built-in float switch! (No separate float switch is needed)
• No power use until pump is activated by internal float switch (when water level rises)
• Equipped with built in electronic controlled reed sensor system for easy fully automatic operation

MAXZONE

• ★ Specification: Flow Rate: 1100GPH; Voltage: 12V; Current: 3.0A; Head: 5.0M, Wire Lead: 1M, Outlet Dia: 29mm(1.14"), Dimension: 15*8*10CM
• ★ Built-in float switch: No float switch required.Pump turns on when water level rises & shuts off when water is removed. Snap-off strainer for easy cleaning
• ★ Long life motor :Water cooled motors for long life, with anti airlock design and moisture tight seals.Heavy duty motors with stainless steel shafts and tough thermoplastic bodies.
• ★ Durable: All (Auto) Bilge Pumps are built with compact, rust and corrosion protected stainless steel shaft, high-impact durable and thermoplastic ABS plastic housing.
• ★ Package Included: 1 x 1100GPH Automatic Submersible Boat Bilge Water Pump

DasMarine