10 Best In Wall Home Theater Speakers of December 2025

• HEAR SEAMLESS AUDIO QUALITY AND POLK'S EXCELLENT SOUND REPRODUCTION with these timbre-matched discrete recessed speakers that elevate the sound quality, DELIVERING DEPTH OF MUSIC AND CLEAR, CRISP DIALOGUE
• Pair with our RTI Series speakers for seamless imaging or ADD TO YOUR EXISTING HOME THEATER SYSTEM or build your own Polk collection, and enjoy the SAME GREAT POLK SURROUND SOUND EVERYWHERE
• EXPERIENCE MORE BALANCED & LIFELIKE SOUND – Features an 8” dynamic-balance woofer & a 1” tweeter for adding more depth & detail to your music. Mineral-filled polymer cone & strong composite driver baskets create wider dispersion for EVEN-SOUND COVERAGE
• THE RUBBER SEAL DRIVES better response and PREVENTS MOISTURE ACCESS, a key feature for USE IN A BATHROOM, KITCHEN, SAUNA AND COVERED PORCH
• OUT OF THE BOX & RECESSED INTO THE WALL - no mess, no extra assembly - in 3 simple steps QUICKLY & EASILY INSTALL these speakers. Leave the paintable aluminum grilles as is or spray paint to MATCH YOUR EXISTING INTERIOR and virtually make them disappear
• Polk's UNWAVERING COMMITMENT, RELIABILITY, AND CRAFTSMANSHIP, has made it one of the most trusted names in home audio speakers and entertainment systems. They bring out the BEST IN TECHNOLOGY, so you can SIT BACK, RELAX AND LISTEN WITH YOUR HEART!

Polk Audio

• Titanium laminate tweeter for excellent high-frequency sound
• Titanium laminate cone woofer uses rubber surrounds for reduced distortion
• Dog-ear brackets make it possible to retrofit
• Optional rough-in frames are available for new construction
• Frequency response of 30-20,000Hz

JBL

• 1” (2.54cm) Titanium diaphragm compression driver mated to pivoting 90° x 90° square Tractrix Horn
• Dual 5.25” Cerametallic cone woofers
• Perfect for left, center or right channel use
• Easily mounts horizontally or vertically
• Horn-loaded technology increases acoustic output while significantly reducing distortion

Klipsch

• HIGH POWER: The SVC100 is rated at 100 Watts per channel with minimal bass roll-off. It includes front mounted adjustable jumpers to add up to eight pairs of 8 ohm speakers simultaneously.
• VOLUME CONTROL: The controls allow you to adjust the volume of a pair of speakers independently of other speakers in a house audio system. They are ideal for both softer and higher volume locations.
• IMPEDANCE PROTECTION: This feature of SVC100 assists in stabilizing the ohm load going back to the amp or receiver with parallel connections to avoid overheating and damaging expensive equipment by matching the impedance.
• KNOB: Wire a 12-step linear rotary-style knob for a wide range of listening volumes. Includes junction box and screws as well as white, ivory and almond trim plates to match any room decor.
• DESIGN: For dedicated audio zones, the décor plates install easily into a wall and work with almost any system. It accepts up to 14 gauge wiring and fits in a standard gang box with a 2.9” depth.

OSD Audio

• Hi-Fi SOUND WITH BROAD COVERAGE & DEEP BASS even at low frequencies. Powered by Dynamic Balance & Polk's patented Power Port technology, the 70-RT In-ceiling speaker comes with a 2.5" Midrange driver, 7" Subwoofer & a 0.75" Dome Tweeter
• Designed to offset reflective surfaces with no sound distortions, this 3-way driver array produces BIG, FULL-RANGE PERFORMANCE FROM A DECEPTIVELY SMALL IN-CEILING SPEAKER
• EASY TO MOUNT AND INSTALL - PERFECT FIT TEMPLATES, a precision flange, (available) pre-construction brackets and the PATENTED ROTATING CAM system ensure secure, vibration-free installation
• This in-ceiling loudspeaker VANISHES INTO THE CEILING giving you a clean, clutter-free look, becoming the CENTER STAGE OF ROOM-FILLING SOUND. Paint the wafer-thin sheer grille in any color you want and it EASILY BLENDS INTO YOUR HOME DECOR
• Polk’s UNWAVERING COMMITMENT, RELIABILITY, AND CRAFTSMANSHIP has made it one of the most trusted names in home audio. Bring out the best in surround sound systems and acoustic excellence, so you can SIT BACK, RELAX AND LISTEN WITH YOUR HEART
• Output wattage: 125 watts

Polk Audio

• Acoustic Audio by Goldwood HT-55 in wall and in ceiling 2-way 5 speaker set, 3 pieces of IW191 in wall speakers, 2 Pieces of R191 in ceiling speakers, recommended power is 20-200 watts per speaker, 8ohm
• Frequency response is 40hz-22 kHz, crossover frequency is 2200Hz, efficiency is 97dB, 2-way design, 5.25" Woofers with high rigidity polypropylene cones and extended Throw drive Assemblies
• Butyl rubber Surrounds, 12mm soft dome tweeters, tweeters pivot on IW191 speakers, paintable frames and grills, low profile housings, integrated wall-lock mounting system, Designed in the USA
• Cut-out templates included, Rectangular cut out is 6.25" X 9.5", overall is 7.625" X 11.125", depth is 3", round cut out is 6.625", overall is 7.925", depth is 3", full instructions included
• Use for in wall or in ceiling home entertainment, surround sound, home theater, multiple room systems, Industrial sound, This Listing and price is for 1 complete 5 speaker set

Acoustic Audio by Goldwood

• Acoustic Audio 9 piece home speaker 2-way set, 4 hd-800 wall speakers, 30hz-22 kHz, 98dB, 2 hd-8 ceiling speakers, 38hz-22 kHz, 98dB, 20-350w per speaker, 8ohm, 8" Woven fiber bulletproof woofers
• Butyl rubber Surrounds, pivoting titanium tweeters, Rectangular cut out 8.75" X 12.66", overall 10.125" X 14.25", depth 4", round cut out 9.5", overall 11", depth 4", low profile housings
• Hd-6c wall center Channel 3-way speaker, 20-350 watts, 33hz-22 kHz, two 6.5" Woofers, 12mm soft dome tweeter, cut out is 19.25" X 7.5", overall is 20.5" X 8.75", depth: 3.25"
• 2 HDS10 wall passive Sub speakers, 20-300w each, 26hz-200hz, 10" Woofers, cut out is 10.625" X 10.625", overall is 12" X 12", depth is 3.75", these passive subs require a Ws1005 Sub amp each
• Use for in wall or in ceiling home entertainment, surround sound, home theater, multiple room systems, This Listing and price is for complete 9 piece in wall and in ceiling speaker set

Acoustic Audio by Goldwood

• 2-way in-wall speaker with a high excursion 8" poly woofer and a 1" soft dome tweeter
• Perfect integration between the tweeter and woofer is achieved through a 12dB crossover network
• Smooth and natural sound signature with robust bass output for impactful listening experience
• Designed for optimal performance in a wide variety of home entertainment applications
• Easy to install and can be painted to blend into any décor

Micca

• CRYSTAL CLEAR SOUND WITH A DEEPER BASS for a true cinematic experience. Powered by Dynamic Balance, Distance Toggle & Polk's patented Power Port technology, the 265-RT In-wall speaker comes with (2) 6.5" Mid/Woofer & a 1" swivel-mount Silk Dome Tweeter
• BUILD A HIGH-PERFORMANCE HOME THEATER SYSTEM THAT DELIVERS! Designed to offset reflective surfaces with no sound distortions, use this 3-way speaker as LEFT/RIGHT SPEAKERS OR REAR SURROUNDS in a 3.1, 5.1, 6.1 or 7.1 channel system
• EASY TO MOUNT AND INSTALL - PERFECT FIT TEMPLATES, a precision flange, (available) pre-construction brackets and the PATENTED ROTATING CAM system ensure secure, vibration-free installation
• This in-wall loudspeaker VANISHES INTO THE WALL giving you a clean, clutter-free look, becoming the CENTER STAGE OF ROOM-FILLING SOUND. Paint the wafer-thin sheer grille in any color you want and it EASILY BLENDS INTO YOUR HOME DECOR
• Polk’s UNWAVERING COMMITMENT, RELIABILITY, AND CRAFTSMANSHIP has made it one of the most trusted names in home audio. Bring out the best in surround sound systems and acoustic excellence, so you can SIT BACK, RELAX AND LISTEN WITH YOUR HEART

Polk Audio

• Theater Solutions TS65W in wall speakers, recommended power is 10-200 watts per speaker, efficiency is 93dB, frequency response is 32hz-20 kHz, 8ohm, 2-way design and functionality
• 6. 5" Woven fiber bulletproof Cone woofers with Butyl rubber Surrounds, pivoting Silk titanium dome tweeters, 2nd order 12dB per octave crossovers, spring loaded raw wire connections
• Paint-able frames and grills, low profile housings designed for easy installation, unique wall locking mounting system, no mounting hardware needed, Cut out templates, full instructions included
• Cut out Size is 10. 5" X 7. 125" Per speaker, overall size is 12. 125" X 8. 6875" Per speaker, mounting depth is 3" Per speaker, Designed and engineered in the USA
• Use for in wall or in ceiling home entertainment, surround sound, home theater, offices or commercial, This Listing and price is for 1 pair/ 2 in Wall speakers

Theater Solutions