10 Best Home Audio Subwoofer of December 2025

• 12" high excursion spun-copper Imp woofer
• 29 hertz – 120 hertz +/- 3 dB
• 400 watt
• Max acoustic output 116dB
• Bass-reflex via rear firing port. Amplifier power (control/peak): 200 watts/400 watts
• Output wattage: 200 watts
• Included components: Manual; Grill; Power cord

Klipsch

• 115 Watt, Amplified Subwoofer (6 ohms, 80 Hz, 10% THD).Compatible with High-Resolution Audio
• 10 inches Foamed-Mica Cellular Reinforced Woofer
• Speaker and Line Level Inputs, Frequency Response 28-200 Hz
• In the box: RCA cord, Instruction manual

Sony

• This is an 8" powered subwoofer capable of producing 60 watts (RMS) output. The subwoofer has a frequency response range of 50 to 250 Hz with a lowpass crossover filter, which can be adjusted from 50 to 150 Hz. Gain and frequency knobs on the control panel allow you to adjust the crossover filter and the power output for the optimum blend and balance of bass output with your stereo or surround speakers.
• The subwoofer has multiple input options, which allow it to be used with any existing stereo or 5.1 (or greater) amplifier system. For each input there is a corresponding output.
• High-level inputs accept a full-range signal from the amplifier's stereo speaker outputs. When connecting the unit as part of a 5.1 system, these would be taken off the Front Left and Front Right outputs in parallel to the standard pair of front speakers. The subwoofer provides its own power and includes impedance matching circuitry, so this will not reduce the power output to the front speakers or affect the overall impedance load on the amplifier.
• Additionally, the subwoofer has a set of right/left Line Level inputs. If using a standard stereo system, without a special subwoofer output, you can connect these to the left and right line level outputs on the amp. The subwoofer will then combine the signals to process the mono bass signal it needs to drive the speaker. If you are using an amplifier with a single mono subwoofer line level output, simply use an RCA "Y" cable to split the output and send it to the two line level inputs on the subwoofer.
• The subwoofer is housed in an attractive black wood cabinet that measures 13.75" x 11.75" x 11.75" (H x W x D). The driver and a 2 3/4" sound port are located on the front, covered by a black cloth speaker grill.

Monoprice

• New twisted flare port contributes to clear and tight bass
• Advanced YST II (Yamaha Active Servo Technology II)
• 8” cone woofer
• Stylish addition to any room
• Dynamic Power: 100 W (5 ohms)

Yamaha Audio

• Enclosure Type: bass reflex
• Amplifier Type: Class AB
• Amplifier power: 120 watts peak/ 60 watts RMS
• Frequency response: 38hz-200hz; crossover frequency: 40hz-200hz
• Driver: 10" Low Throw dynamic woofer with these inputs: L/R/LFE/speaker level

ELAC

• 12" front-firing, spun copper img woofer
• 2. 4Ghz wireless hi-fi pre-paired transmitter
• All-digital amplifier
• Low pass crossover and phase control
• Strong, flexible, removable grille
• Included components: One Subwoofer, Wireless transmitter, power cable

Klipsch

• HIGH EFFICIENCY SUB-WOOFER FOR SMALL TO MEDIUM-SIZED ROOMS - The HTS 12 features a 12" front-firing long-throw woofer with Polk's proprietary Dynamic Balance Technology designed to fill your room with immersive, three-dimensional sound in great clarity
• YOUR BEST BET WITH MODERN LOOKS & THUNDEROUS PERFORMANCE – The sleek rounded corners are a highlight, but this sub will surely take your movie & music experience up a notch with its deep rumbling bass from the in-built 200-watt amplifier (400W at peak)
• POLK'S PATENTED POWER PORT TECHNOLOGY delivers deeper bass response with its turbulence-smoothing diffuser that transitions air flow from the speaker into your listening area minimizing any kind of distortion & delivering rich full-range sound everywhere
• UNIVERSAL COMPATIBILITY & VERSATILITY – The sub comes with LFE & stereo line level inputs. Pair it with any of Polk’s Signature series 2-channel stereo speakers or create a complete home theater with S60 tower, S20 bookshelf & S35 center channel speakers
• ALL CONTROLS ON THE REAR PANEL – Controls for volume, low pass filter and phase toggle for optimum bass levels (0 to 180 degree) are in close reach - right on the back of the subwoofer. The front has a clean rich look with detachable grille
• Polk’s commitment & expert craftmanship with their use of advanced technology, master engineering, and innovation helps them bring out the BEST IN SOUND SYSTEMS AND SPEAKERS so you can SIT BACK, RELAX AND LISTEN WITH YOUR HEART

Polk Audio

• POWERED SUBWOOFER FOR EXTRA BASS & PUNCH – A 10-inch dynamic balance woofer & a uniquely configured directed port provides accurate bass with added depth that brings your music and movies alive. A perfect solution for your small-to-mid size room
• LOUDER CLEARER SOUND EVEN AT HIGH VOLUME – Enjoy a thrilling yet balanced music experience with rich, deep sound, even at low frequencies. Blends easily with any speaker and plays the most demanding nodes effortlessly without any distortion
• Double the amplifier power to 100 watts of dynamic power with its in-built 50-watt RMS amp. Sophisticated engineering with best in class resonance-free driver materials make this sub highly durable and fit for extended use
• EASY TO INTEGRATE WITH EXISTING SYSTEMS – Hook up this sub to the receiver and upgrade your music sound instantly. Features continuously variable 80-160 Hz crossover and 40-160 Hz (-3dB) frequency response
• A sleek detachable grille on the front, speaker and line-level inputs as well as speaker-level outputs on the back, and a phase toggle switch for multiple subwoofers, make this sub cohesive and complete

Polk Audio

• Powerful 10" copper-spun front-firing woofer
• All-digital amplifier delivers 300 watts of dynamic power
• Equally impressive with music and movies
• Low pass crossover and phase control,Dimensions:14(H) x 12.5(W) x 15.7(D) Inches
• Line/LFE inputs for compatibility with most receivers

Klipsch

• Rockville Rock Shaker 8 Black 400 Watt Powered 8" Home Theater Subwoofer.
• 400 Watts Peak / 200 Watts RMS. Built-in Class D Amplifier. Enclosure is made of top quality MDF wood. (MDF wood sounds better and lasts longer than particle board). High-grade vinyl enclosure covering with a beautiful finish. The enclosure is built with the perfect air space to maximize sound quality and punch. The rear firing port is engineered for optimal sound.
• Class “D” Amplifier Circuitry with Auto-Switching Power Supply. High-grade woofer with foam surround and paper cone. Woofer has a Y30 grade magnet, and 1. 5” 4-layer voice coil. Distortion-Free Playback Even at Max Volume Listening! Very Clean Sound! . Enclosure is filled with fire resistant poly cotton. Detachable foam grill. Inputs / Outputs / Controls: . . RCA line input. RCA line output. Speaker High level inputs. Speaker High level outputs.
• Volume control. Phase switch (0°-180°). Crossover Frequency control. Power switch. Standard IEC power cable included. Specifications: . . Amplifier: Class D. Woofer Impedance: 4 Ohm. Signal to noise ratio: 85 dB (Maximum output with THD+1<1%, A-weight). THD: 1%. INPUT sensitivity: 88dB +/- 2dB. Frequency Response: 20 Hz - 200 Hz. 400 Watts peak output. 200 Watts RMS output. Voltage: 110-240V.
• Product Dimensions in Inches: (W*H*D): 11. 8'' x 15'' x 13. 8''. Shipping Dimensions in Inches: (W*H*D)14. 6 ''x 18. 3'' x 18. 9 ''. Unit Weight: 18 LBS. Shipping Weight: 22 LBS. Color: Black

Rockville