10 Best Hard Hat of December 2025

• 4 point ratchet suspension allows wearer to customize height and fit
• Suspension sits lower on head to reduce pressure and increase security
• Short brim enhances better upward visibility
• Slots allow for attachment of safety accessories
• Replaceable brow pad enhances comfort and extends life
• Meets requirements of ANSI/ISEA Z89.1-2014 Type I, Class G and E

3M

• Carbon Fiber Hardhat Weighs in at 420g without suspension system. 550g with suspension
• Fiber reinforced resin shell for superior impact protection - 6 Point Suspension for Maximum Comfort
• Brim grip, exclusive design provides a secure feel - Triple Reinforced Crown For Superior Impact Protection
• Perforated Clarino synthetic leather comfort dome with molded EVA foam insert for additional shock absorbing protection to the top of head
• Meets ANSI Z89. 1-2014 requirements for Type 1, Class C.

LIFT Safety

• Klein Tools Hard Hat, Vented, Full Brim with Headlamp

Klein Tools

• Fiber reinforced resin shell for superior impact protection
• Brim grip, exclusive design provides a secure feel
• Perforated clarion synthetic leather comfort Dome with molded EVA foam insert for additional shock absorbing protection to the top of head
• Oversized ratcheting fitment dial to adjust size, easy to grip and use with gloves on
• 8 point Suspension system for a secure, comfortable fit

LIFT Safety

• Skullgard helmets have been tested to radiant heat loads producing temperatures up to, but not exceeding, 350F.
• ANSI/CSA Type I Compliant, Protects from vertical impacts and penetrations
• ANSI/ISEA Z89.1-2014 (Class G) Compliant, provides dielectric protection up to 2,200 volts.
• Equipped with Fast-Trac III ratchet-style suspension for easy fast size adjustment and all day comfort
• Standard Size, Fits from 6 1⁄2" to 8"

MSA

• Country Of Origin : China
• The Package Height Of The Product Is 9 Inches
• The Package Length Of The Product Is 15 Inches
• The Package Width Of The Product Is 13 Inches

Pyramex Safety

• Skullgard helmets have been tested to radiant heat loads producing temperatures up to, but not exceeding, 350F.
• ANSI/CSA Type I Compliant, Protects from vertical impacts and penetrations
• ANSI/ISEA Z89.1-2014 (Class G) Compliant, provides dielectric protection up to 2,200 volts.
• Equipped with Fast-Trac III ratchet-style suspension for easy fast size adjustment and all day comfort
• Standard Size, Fits from 6 1⁄2" to 8"
• Made in the USA
• Note: Helmet darkens over time

MSA

• ABS material – strong, yet ultra-light for seemingly weightless protection
• Low profile design – offers a low center of gravity for better balance
• Rear padded suspension – provides additional level of comfort on the wearers’ Neck
• 4-position harness points allows you to move the harness forward, backward, up or down – allowing for the most optimal position for ultimate comfort
• Replaceable sweat band – padded fabric and polyurethane foam for all day wear

Pyramex Safety

• Constructed from ABS material — Strong, yet ultra-light for seemingly weightless protection
• Ratchet suspension is easy to adjust and allows the wearer to modify the fit while wearing hard hat
• Replaceable soft brow pad, suspensions and headbands also available. Provides protection at low temperatures -22°F. Provides protection at high temperatures 140°F
• 4-Point suspensions can be converted to a 6-point suspension with the HP6PTSUS
• Meets ANSI Z89.1-2009 standards, type 1, Class C, G, and E. General dimensions- 12 13/64 X 10 5/8 X 5 63/64 Inches. Shell thickness- 0.07 To 0.16 Inches

Pyramex Safety

• Lightweight shell constructed from High Density Polyethylene
• Ratchet suspension is easy to adjust and allows the wearer to easily modify the fit while wearing hard hat
• Full brim around helmet protects wearer from sun and rain; mounting point for chinstrap (optional-not included)
• Great for industrial, electrical, utility and energy applications
• Meets ANSI Z89. 1 Type 1 Class C, G and E

Pyramex