10 Best Glue For Aluminum of August 2025

List of Top Rated Glue For Aluminum from thousands of customer reviews & feedback.

Updated On Aug 2025

880 Reviews Studied

By Customer Ratings

1
Image
Permatex 84109 PermaPoxy 4 Minute Multi-Metal Epoxy, 0.84 oz. Read Review

  • Versatile, easy-to-use, multi-metal dark grey epoxy adhesive that eliminates the need for welding or brazing
  • Water and solvent resistant epoxy sets in 4 minutes with no clamping needed; permanent strength up to 4500 PSI
  • Fills gaps and will not shrink; when cured can be drilled, sanded, threaded or filed
  • Temperature Range: -60°F to 300°F (-51°C to 149°C)
  • Suggested Applications: Ideal for complex, multi-piece assemblies; bonds rigid materials including aluminum, brass, chrome, copper, iron, stainless steel, and steel; use to seal welded seams, fill metal cracks, and mount metal components

2
Image
Hy-Poxy H-450 Alumbond 6.5 oz Aluminum Putty Repair Kit Read Review

  • Epoxy metal weld for aluminum
  • Repairs HVAC, radiators, engine blocks, boat hulls, equipment, appliances
  • Can be drilled, tapped, sanded, threaded and painted
  • Gives you a non rusting, non magnetic aluminum gray color, stays gray even after sanding/polishing
  • Made in the USA

3
Image
J-B Weld 8272 MarineWeld Marine Epoxy - 2 oz. Read Review

  • J-B WELD MARINEWELD: A two-part epoxy cold weld system that provides strong, lasting repairs to multiple surfaces. Perfect for all DIY marine and watercraft repairs.
  • CURE AND SET TIME: After mixing the tubes at a 1:1 ratio, it takes 4-6 hours to set and 16-24 hours to cure. Once cured J-B Weld MarineWeld can be tapped, filled, sanded, molded and drilled. J-B Weld MarineWeld’s set and cure color is dark grey.
  • VERSATILE AND DEPENDABLE: J-B Weld MarineWeld is steel reinforced, has a tensile strength of 5020 PSI and can withstand temperatures up to 550 degrees Fahrenheit (287 degrees Celsius). When fully cured, MarineWeld is waterproof and resistant to petroleum, chemical and acid. It retains strength above & below water.
  • SURFACE APPLICATIONS: Aluminum, Fiberglass, Metal, Plastic/Composite, Wood.
  • DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond.

4
Image
J-B Weld 8265S Original Cold-Weld Steel Reinforced Epoxy - 2 oz. Read Review

  • J-B WELD ORIGINAL: The Original Cold Weld two-part epoxy system that was designed as an alternative to torch welding. J-B Weld Original provides strong, lasting repairs to multiple surfaces and creates a bond stronger than steel. Perfect for DIY household, automotive, marine, craft repair and much more.
  • CURE AND SET TIME: After mixing the tubes at a 1:1 ratio, it takes 4-6 hours to set and 15-24 hours to cure. Once cured, J-B Weld Original can be tapped, filled, sanded, molded and drilled. J-B Weld Original’s set and cure color is dark grey.
  • VERSATILE & DEPENDABLE: J-B Weld Original is steel reinforced, has a tensile strength of 5020 PSI and can withstand temperatures up to 550 degrees Fahrenheit (287 degrees Celsius). When fully cured, J-B Weld Original is waterproof and resistant to petroleum, chemical and acid.
  • SURFACE APPLICATIONS: Metal, Plastic & PVC, Wood, Concrete, Ceramic & Tile and Fiberglass.
  • DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond.
  • Will set in 4-6 hours, and cure in 16-24 hours
  • Waterproof, petroleum, chemical, and acid resistant when fully cured
  • Can be drilled, tapped, machined, filed, sanded and painted
  • Stong and nontoxic after it has set and temperature resistant up to 500F
  • Tensile strength is 3,960 PSI

5
Image
Loctite 1716815 1-Ounce Tube Stik 'n Seal Outdoor Adhesive,Clear,0.556 CDM Read Review

  • Bonds aluminum, brick, cardboard, ceramic, fabric, fiberglass, glass, leather, rubber, steel, wood and most plastics
  • At least one surface should be porous
  • Dries crystal clear to a semi-flexible bond
  • Forms a tight, waterproof, weatherproof bond for a superior seal - great for plumbing repairs
  • 1-Fluid ounce tube

6
Image
Super Glue Corp/Pacer Tech SGGM22-12 Super Glue Gel Metal, Aluminum, Rubber, Most Plastics, Ceramics, Wood, & More (2 Pa... Read Review

  • 2 Pack
  • 2 Grams Super Glue Gel
  • No Runs Or Drips
  • Instantly Bonds Metal, Aluminum, Rubber, Most Plastics,Ceramics, China, Wood, Pottery, Jewelry, Fingernails & More
  • Aluminum

7
Image
Steelsoft 3.6 mil Foil & 3.1 mil Backing -Thicker- 60 YD Aluminum Tape/Aluminum Foil Tape for Ductwork, HVAC Tape for Du... Read Review

  • ☞【Smaller Roll For Easier Handle】Steelsoft aluminum tape/aluminum foil tape 60 yards are separated into 2 smaller rolls in 30 yards each, to keep easier handling and tidy operating. You will not need to pick up a heavy and big roll which's tricky when doing the job. 

  • ☞【Thicker HVAC Foil Duct Tape】Steelsoft foil duct tape in 3.6 mil foil thickness, NOT including backing paper(3.1 mil), is the stronger than the common 2.0, 2.4 and 3.2 mil foil on market! 

  • ☞【Easier Peel Off Backing】Due to Thicker foil, the backing paper is easier to be peeled off from edge. It will not be crinkled and curled on itself, easier working and save your time! Small roll will not be messed up and tidy to manage! 

  • ☞【More Sticky】Steelsoft foil duct tape is made of smooth aluminum foil and high quality acrylic glue, more sticky and stable under low and high temperature condition(-20 C to 130 C), UV, moisture and heat resistant, suitable for indoor and outdoor, cold and hot air duct sealing.

  • ☞【Good Packaging】Steelsoft provides each roll foil tape with a strong carton box so that the foil surface is not crinkled, more beautiful, smooth and better sealing performance!

10
Image
960 Pieces 1 Inch Disposable Eyelash Glue Stickers Waterproof Glue Aluminum Foil Stickers Eyelash Glue Holder Pallet Sti... Read Review

  • Large amount of quantity: we provide you 32 sheets of disposable eyelash stickers, 30 pieces for each sheet, 960 pieces in total, sufficient quantity to meet and satisfy your daily needs
  • Good time saver: eyelash glue stickers could be placed on forehead, stone pallet, dresser, beauty table or other places as you like, helpful in improving the speed of eyelash grafting process, quick and easy, no mess need to clean up
  • Material: these eyelash holder stickers are made of tin aluminum foil, suitable for glue pallets and can make clean up easy, can slow down your glue's hardening speed so that your adhesive will last longer and not easy to dry
  • Good for eyelash extension: the size of the sticker is approx. 1 inch/ 2.5 cm in diameter, proper size for you to use, the glue on the sticker can become a full oval shape so that the root of eyelash can dip glue, bringing a good grafting effect
  • Wide range of applications: our eyelash glue stickers are suitable for eyelash extensions, professional beauty supplies, starters or anyone who loves dressing up, easy to operate