10 Best Engineered Wood Flooring of December 2025

• Adjustable knobs allow for tool free adjustment 5/16 7/16 inches for solid hardwood and 1/2 5/8 inches for engineered hardwood and engineered bamboo.
• Over molded rubber grip for comfort and maneuverability
• Muffled rear exhaust to direct air away from workspace
• Non Marring trip tips so you don't accidentally damage the flooring
• Easy sight tongue engagement so you hit the pocket every time

Bostitch

• For use with engineered wood and laminate flooring
• Provides cushion over concrete and wood subfloors
• 360-Feet square roll.The IIC and STC tests measure sound transference from an upper level room to a lower level room. The IIC measures sound such as moving furniture and walking, while the STC measures sound such as voices and television.
• Sound Transmission Lost Test (STC) rating of 66
• Impact Sound Transmission Test (IIC) rating of 67
• 360 sq. ft. roll (60in. x 72ft.) 1/cs

Roberts

• Provides a streak-free clean every time- No-rinse Hypoallergenic formula
• Great on all types wood or laminate, engineered flooring.
• Bamboo, Cork, Pergo, Armstrong, Mohawk and more.....
• Removes spills, stains, dirt, dust, oil, footprints-easy to use just spray and wipe
• Safe around children and pets. Eco-friendly and biodegradable

Black Diamond Stoneworks

• Prefinished Engineered Wood Flooring
• Tongue & groove milling profile
• Aluminum Oxide finish for superior durability & scratch resistance!
• 8-ply construction
• Janka Hardness Rating of 1850

Hurst Hardwoods

• For use with engineered wood planks, parquet flooring and acrylic-impregnated planks up to 1/2 in. Thick and 5 in. Wide
• Solvent free, low VOC, environmentally friendly formulation
• High-solid formula can be cleaned with warm, soapy water when the adhesive is still wet
• Open time: up to 20 minutes, working time: up to 30 minutes, cure time: 24 to 48 hours before foot traffic and moving heavy objects
• Rated for heavy-traffic residential and commercial areas

Roberts

• One 9" Sample Piece of Hurst Hardwoods European French Oak Prefinished Engineered Hardwood Flooring
• 7 1/2" x 5/8" Wide Plank w/Thick w/4mm Wear Layer
• Color is "Washington"; Lightly Wire Brushed
• 70% of actual floor comes in 73" long lengths; balance in 2'-4' boards
• **A maximum of two sample orders of this listing may be purchased per customer.**

Hurst Hardwoods

• 100 sq. ft. coverage with rolls measuring 28 ft. x 43 in. x 2.5 mm
• For use under laminate and engineered wood flooring
• Dense, closed cell structure offers moisture, mold and mildew resistance
• Offers cushioning, sound reduction, resistance and levels minor subfloor imperfections
• Easy installation with plastic overlap and adhesive strip

Roberts

• Used Book in Good Condition

Taunton Press

BuildDirect

• For use with engineered wood planks, plain back parquet flooring and acrylic-impregnated planks up to 1/2 in. thick and 5 in. wide
• Bonds with concrete (on and above grade), APA rated plywood and acoustic cork underlayment
• For interior, direct bond installations
• Rated for heavy residential and moderate commercial traffic
• Up to 20 minutes open time, 30 minutes working time and 24 to 48 hours curing time
• Approximately 45 to 55 and 70 to 80 sq. ft. per gallon coverage for engineered wood and prefinished parquet flooring installations respectively
• Suggested for use with a 1/4 in. x 1/4 in. x 1/4 in. V-notch trowel or 1/8 in. x 1/8 in. x 1/8 in. square notch trowel, depending on installation type
• Solvent-free and LEED compliant; VOC < 2 g/L, SCAQMD Rule 1168
• Protected by GoldGuard, an antimicrobial protection system that inhibits the growth of mold, mildew and odor causing bacteria in both wet and dry adhesives
• Non-flammable for safe use

QEP CO INC ROBERTS