10 Best Electronic Boost Controller of December 2025

• GReddy PRofec Electronic Boost Controller

GReddy

• Electronic turbo PSI boost controller kit, increase the performance and response from your engine.
• Dual stage boost adjustments for low and high boost.
• Comes with mounting hardware and toggle switch, easy installation and operation.
• With one way T-valve, better control for boost spikes than manual controller.
• Made of premium quality material, high strength and durable for a long time use.

Tickas

• Affordable model
• Specially designed solenoid valve for boost control function
• Compatible with internal and external wastegates

HKS

• With the speed solenoid valve to control boost pressure stably.
• Display the boost pressure and monitor the working condition of turbo at the same time. Applicable for both Actuator and Wastegate system.
• The boost pressure will be lowered for protecting the engine if the pressure exceeds the setting value. The highest value is up to 45 PSI.
• Dual boost mode: Separate A and B boost levels can be input independently from each other, and selected depending on driving conditions.
• Warning function: To prevent damage to the turbo and engine. If the boost exceeds the warning value, an audible beep and visible warning display occur.

MOTOR METER RACING

• MAC Boost Control Solenoid Valve, 3 x high quality brass fittings included.
• Compatible with most aftermarket ECU applications
• 5.4W, 25.4ohm, Full vacuum to 120psi capable
• 3 x high quality brass fittings included (2 x barbed, 1 x sintered air vent/muffler - sintered is used to avoid having to run another line to your air filter).
• The MAC (Automotive Grade) 3 port valve is a true solenoid. It is rated to hold boost pressures far in excess of levels that any petrol turbocharged engine is ever likely to see. This extremely compact Solenoid only has a 2 wire installation and has 3 port connections.

MAC

• Aimed at the street performance market
• Features many boost control capabilities found on the e-Boost2
• Provides class-leading boost control
• Two boost settings easily selected via the turn-and-push button; External switch can be used to change between boost groups if required
• Supplied with e-Boost STREET control unit, wiring loom and installation kit, solenoid with mounting bracket and vacuum fittings, vacuum hose and hose clamps

Turbosmart

• Part Number: 3005

GFB

• For boost pressures up to 50psi (3.45bar, 345kpa)
• Just like the GFB 3004 G-Force II but better with the added A/F Ratio feature!
• Adjust peak boost, rise rate, and closed-loop correction
• 6 boost presets, individually programmable
• Peak boost recall

GFB

• User programmable boost cut safety using Air/Fuel and Pressure references
• Programmable waste gate reference pressure threshold
• Programmable solenoid duty cycle with separate gain control function
• Programmable shift light & OLED user configurable display
• No PC required for configuration and use (Required for data logging)
• 4 BAR map sensor, pressure range -29 inHG to 43.5 PSI (-1 to 3 BAR)

Innovate Motorsports

GReddy