10 Best Electric Pool Heater of December 2025

• Flow Activation
• Ecosmart Pool Heaters are compact and easy to install for a new or existing pool
• Set your temperature digitally to increments of 1-Degree. Set it and forget it.
• Compatible with Ecosmart Remote Control
• Can be used as an alternative to or booster to heat pump. Phase - Single

Ecosmart US

• Can provide hot water for one sink at 0.5 GPM in warmer climates
• Requires 1 x 30 amp breaker and 10 AWG wire
• For one sink at 0.5 GPM in colder climates the POU 6 is recommended
• Amperage Draw 29 amp. kW - 3.5 kW
• Connection Fittings 1/2" NPT

Ecosmart

• Keep your pool warm with a polypropylene heat collector. Direct Flow System - One Header Hole for Each Heating Tube
• Solar heater features 80 square feet of solar panels
• Pool accessory is perfect for heating any in-ground swimming pool
• Panel array measures 4 feet wide x 20 feet long. Raises Pool Water Temperature 6-10°F (4-6°C)
• Installation kit required (Sold Separately)

SmartPool

• Acoustic compressor cover and profiled fan blade ensures quiet operation and efficient performance
• Ultra-Gold corrosion resistant evaporator fin for extreme durability especially in coastal environments
• Titanium heat exchanger designed for maximum heat transfer, efficiency and reliability
• Durable injection molded UV-resistant body panels that are impervious to rust and deterioration
• 2in x 2 1/2in CPVC Union Plumbing Connections - Common union for installation or service, adapts to larger plumbing recommended for greater efficiencies

Hayward

• CONVENIENT HOT WATER HEATER: 7 gallon point-of-use mini-tank fits under your sink to provide hot water right where you need it. Thermal efficiency is 98%. Dimensions : 17.5 W x 17.5 H x 14.5 D Inches
• INSTALLED VERTICALLY OR HORIZONTALLY: This larger model can be mounted vertically (7 gal. of water supply) or horizontally (5.1 gal. of water supply)- vertical orientation is installed with the cold and hot lines on top of the unit
• RELIABLE WATER SOURCE: Easily hard-wire the 7-gallon model to provide the on-demand reliable water source your home or office needs
• IMPORTANT INFORMATION: Heating capacity of 1440 watts and a temperature range of 65-145°F max. Operating pressure-150 psi. Water fittings-3/4 inch Male NPT. Electrical requirements (Amp 12A/Volts 120)
• EASILY MOUNTED: Can be shelf, wall or floor mounted (bracket included for vertical orientation only); simply tap into the cold water line and install the water heater directly at the sink to provide hot water

Bosch Thermotechnology

• Whirlpool accessory
• Maintain constant water temperature
• Allows for longer, more relaxing soak
• All American Standard whirlpools are pre-plumbed at the factory making them ready to accept the heater
• Quick and easy two-step installation

American Standard

• Quick Heating Speed: 1000w 120v electric bucket heater for water only, high power ensures a quick heating speed, heats 5 gallons of water in minutes, use for cold weather and travel. Perfect for winter time jobs.
• Thermostat and Auto Shut off: The stainless steel tube contains a thermal overload safety switch, when the heating element reaches about 190 degrees F, bucket heater with thermostat can automatically cycle on and off to maintain water temperature to save power. dry burning will auto shut off power to avoid catching fire.
• 304 Stainless-steel Guard: The high quality 304 stainless-steel guard on the portable immersion heater protects the heating element from directly contacting persons or animals. the holes on the guard will release heat into the water faster.
• Simple Operation: Immerse in water at proper level. Plug into any grounded wall outlet. Check power indicator light in plug to make sure travel immersion water heater is on. It will heat water continuously over 180 degrees F and towards boiling. make sure the container designed to contain boiling water.
• UL-Listed against to the US safety standards, 12-month warranty. Package included: 1 pack bucket heater + Manual.

KINGWORK

• Twice the Power: Heat water faster with our 1800-watt water heater and within minutes the water (About 5 gallons) will be noticeably warmer. (Warning: - When heated, it is prohibited to put a hand in the water to test the temperature, one needs to always unplug first before touching the water - It is required to fully immerse the heater in water to avoid any potential fire hazard).
• Rust Proof Stainless Steel Guard: The protective guard ensures no direct exposure to the heating element by people or pets. Heat dissipates to the water faster by flowing through the holes in the guard.
• Easy to Use: Fully submerge the UL 499 Standard certified heater in a bucket, tub or trough of water and plug into a grounded 120v plug. You can submerge the handle and cord. Feel the difference in a few minutes!
• Widely Application: The immersion water heater can be used in water, especially fit for heating water in large size container like bucket, basin, bath tub, mini inflatable swimming pool, etc.
• For any Cold Weather Application: Heat your farm animals’ water, your tiling water on the job site, car wash bucket, pail of bath water in a tiny home or camper, window washing water and more! WARNING: Remove the heater before touching the water and please do not continuously use for over 4 hours!

CalPalmy

• Lifetime warranty
• Save up to 60-percent on your water heating cost with an ECOSMART electric tankless water heater
• Never run out of hot water with an ECOSMART tankless water heater
• Patented Self Modulating Technology and design
• ECOSMART tankless water heaters are 99.8-percent energy efficient.Uniform Energy Factor:0.98

Ecosmart

• Input voltage:220V, Power: 3KW, Size: 180 * 125 * 125mm
• This thermostat is specifically designed for the hot tub, the thermostat is installed in the pipeline jacuzzi. When adding hot water bath, start the pump, the thermostat automatically heat insulation work, so the water temperature bath maintained at 39 degrees Celsius, give your Jacuzzi to create a more comfortable environment.
• Heating rate: The thermostat can be maintained within a temperature not exceeding 40 °C (104 °F) range. If cold water is started, will be 6 ~ 8 °C / h elevated temperatures.
• Automatic heating: Thermostat will first reach the preset temperature, then stop working until the temperature dropped a few degrees, the thermostat automatically turns on.
• Thermostat operation is fully automated, clockwise, the heating is on, indicator light, temperature reaches a preset temperature, will remain at that temperature.

TongBF