10 Best Electric Fuel Pump For Carb of March 2026

• JDMSPEED Universal for gasoline or diesel engine
• Voltage : 12V Current : andlt;1.8A
• Output Pressure : 3-6 PSI
• Installation hole distance : 2.638 inch (6.7cm); Tubing Interface: 0.315inch (0.8cm)
• Flows : andgt; 70 L/H Pressure : 0.032-0 .045 MPA

JDMSPEED

• Output Pressure : 5 - 9 PSI; Input Voltage: 12V; Output : 30 GPH. Fuse specification: 12 Amps; Crossreference : E8012S, EP12S, FD0002, P60430, 6414671
• 100% mechanically tested prior, ensures optimal performance and enhanced durability. Highest 12 inches fuel suction
• 100% Brand new and high quality, TS16949 quality system certified. Built-in German-made copper coil
• Universal For All 12 Volt Cars , Trucks , Boats & Generators
• 2 YEARS WARRANTY AND 100% MONEY BACK -- If you are not satisfied with the product, please contact us to refund or replace the product quickly and easily

Megaflint+

• Universal fit for All 12 Volt Cars , Trucks , Boats & Generators
• Model: HEP-02A, Output Pressure: 2.5-4PSI，Input Voltage: 12 Volt, Flow Rate 30 GPH
• Stronger suction to ensure the fuel feeding of the car more stable
• Package Including: 1x 12V Electric Fuel Pump
• Built to strict quality control standards. Please contact us with any issue or question you have before or after the purchase.

DSparts

• Model: E8012S, Output Pressure: 5-9 PSI，Input Voltage: 12 Volt
• Compatible Electronic Devices All 12 Volt Cars , Trucks , Boats & Generators
• The product is manufactured in ISO 9000 / ISO 9001 / ISO 9002 certified facilitie.
• Crossreference : E8012S, FD0002, P60430, EP12S, 6414671, It features a two wire design,which can be mounted anywhere.
• Highest 12 inches fuel suction. Fuse spec.12 Amps

STEINBRÜCKE

• Fuel transfer pump running on 12v,pressure 2 to 3.5 PSI,Flow rate 28 GPH,Inlet and outlet size 5/16"(0.315 inch).
• Fuel pump connect with 2 bolt fitting, 2 wires design. Stronger suction to ensure the fuel feeding of the car more stable.
• 12v universal fuel pump fits for Cars, Trucks, Boats&Generators and purchased by confidence within 12 months warranty.
• Perfectly suitable for Toyota, Ford, Honda, Mazda, and any other suitable car
• Fuel pump for Gasoline, Not Fit for: E85 standard or for Ethanol, Diesel, Methanol and Race Fuel,Water and watery liquid.DO NOT USE PUMP WITHOUT A FILTER.

CarBole

• Advanced polymers, brushes, and commutators to ensure long life and durability in multiple fuel blends; DOES NOT FIT Fuel Injected Engine. Please make sure to check fitment below!!
• Both inlet & outlet are threaded - low pressure pump for carbureted engine only. Operation Pressure: 9-14psi
• Comes With Tight Seal Washers And Electrical Connector Plug
• Replaces Part Numbers# Replacement For Mercruiser 861155A3 / Replacement For Mallory 935432 / Replacement For SIERRA 18-8868
• Please make sure to check fitment below!!

JDMSPEED

• Low pressure fuel pump: running on 12v, Pressure 2.5 to 4 PSI, Flow Rate 30 GPH
• Universal electric fuel pump 12v: universal For All 12 Volt Cars , Trucks , Boats & Generators, Carburetor, Lawnmower.
• 12 volt inline fuel pump: easy to fit and connect with 2 bolt fixing,2 wires design
• Gas diesel gasoline fuel pump: stronger suction to ensure the fuel feeding of the car more stable
• Premium eletric fuel pump: 1 year warranty. If you have any questions about our fuel pump, please contact us for a satisfactory solutions.

Lonfu

• OE Reference NO.:861155A3 807949A1 861156A2
• Package includes:1 x electric pump high pressure
• Fits for 1998 Mercury Marine Fuel Pump 4.3L 262; fits for 2000 Mercury Marine Fuel Pump 5.0L 305; fits for 2000 Mercury Marine Fuel Pump 5.7L 350
• Fits with MCM/MIE 4.3L/V6 and 5.0L/V8 Gen+ and some 350 ci carburetors

EVER

• Tumble polished billet look
• Lower housing casting designed for enhanced fuel flow and quiet operation
• Motor draws only 3 amps current
• Not designed for use on aircraft of any type
• Fit type: Vehicle Specific

Holley

• FITS: For Mercury Mercruiser Marine Boat. Does not fit fuel injected engine.
• REPLACES: Mercruiser 861155A3, 861155A 3, Mallory 935432, Sierra 18-8868, 18 8868, 188868.
• NOTE: Both inlet and outlet are threaded - low pressure pump for carbureted engine only and also low pressure applications only.
• EXPLANATION: Advanced polymers, brushes, and commutators to ensure long life and durability in multiple fuel blends; Does not fit fuel injected engine. Operation Pressure: 9psi - 10 psi.
• ENSURE: If there is any problem with the product, please do not hesitate to contact us, we will help you solve the problem.

WLFINKMO